Haltech options
 

Am i right in saying the E6K can be used to control the Electric rad fan?

Do the E6K's work ok with Partail Bridge?

What Ignition system would you recomend to complement the E6K?

to control the radiator fan you just wire whichever PWM output you have asigned to the thrermofan to a relay and then run the fan to the relay, you can set the turning on and off temps of the fan

Yes works fine on a partical bridge

ignition system - stock CAS, Stock Coils, Stock ignitors, B10EGV plugs, good leads and BOBS YA UNCLE

unless you are planning on running methanol and or over 20psi then the stock coils/ignitors are more than up to the task

Cheers.