Build Thread (Loongg overdue)
5 Attachment(s)
*I started writing this thread in the build thread section but am moving it here due to it pertaining more to drifting/drift build*
Hey guys, so I've always wanted to make a build thread but was always too busy and lazy. When i first purchased my FD I wasnt sure what i wanted to do with it. I was mostly into cars and highway pulls, stuff like that. But I've grown big into drifting so you'll see this thread make its way to that side of the spectrum. Even though i havent drifted it much im still learning. (Dont be mean, i know im learning to drift on a fd...) I bought my car march of 2011. Yes i know a long long time ago haha and alot has been done to the car since but im going to try and go in order of the upgrades that ive done. Trust me theres a ton of fresh material that i still need to do so this thread i feel will never die. Plus i always like changing stuff up. Any comments and thoughts are open to discussion. I'm always open to new views on setups whether i go that route or not. http://i1293.photobucket.com/albums/...psc5cb79f3.jpg Attachment 647956 Attachment 647957 Attachment 647958 Attachment 647959 Attachment 647960 |
Its a really clean FD except for the paint
but i cant complain, its whatever. It was mostly stock when i bought it but had some money saving upgrades luckily. It had Fuel Pump (Walbro 255l) Block off plates Tweakit Racing air Pump Delete Idler pulley PFC and Commander (street tuned 13 psi) ACT street/strip clutch Boost gauge (Column mount) Down pipe High-flow cat Racing Beat dual tip cat back Koni adjustable shocks with H&R coil-over’s Tripoint adjustable front sway bar (.188) Racing Beat rear sway bar Unobtaniun bushings Pettit Aluminum AST upgraded radiator |
2 Attachment(s)
of course the first thing i change is the shifter (RICER LOVE!!!) haha
actually i liked the stock shifter but it was so worn out it was making my hand all black. so that had to change. i ended up just buying a cheap Razo shift knob Attachment 647954 paint looked better when it was wet after a wash. lol Attachment 647955 |
upgrades were slow in the beginning as i didn't have alot of money left after buying it driving it back from kentucky to chicago.(was an awesome trip) and registering and all that bullshit.
but i did have fun driving it Also this is the first rotary i have ever owned and was hooked. |
2 Attachment(s)
Mostly cruised the car in the beginning.
Attachment 647818 and right before winter my plastic hot pipe cracked :icon_tdow Attachment 647819 |
2 Attachment(s)
no pics... :dunno:
but i ended up ordering a pettit side mount intercooler with duct along with a hks bov While i waited for that stuff to come i also ordered and relocated my battery to the bins Attachment 647816 Attachment 647817 Yes i put the bins back in also. |
3 Attachment(s)
Ripped out that little baby intercooler for the new one.
Attachment 647813 Holy shit this intercooler is huge compared to stock! Attachment 647814 Attachment 647815 i was going to install this stuff myself but soon after my car was being taken to Banzai Racing and there was no point to install things that would get taken right back out... just in time for winter on 12/14/11 my car was taken to Banzai. http://banzai-racing.com/2.5%20Logo.jpg http://i1293.photobucket.com/albums/...s3ec13074.jpeg http://i1293.photobucket.com/albums/...psff395e9f.jpg |
3 Attachment(s)
While my car was at Banzai for the winter it ended up getting an engine rebuild with a streetport.
Simple custom intake. New rad hoses New clutch disk New plugs Poly Motor Mounts Along with the new intercooler and bov being installed also. Attachment 647810 Attachment 647811 http://i1293.photobucket.com/albums/...psafec812f.jpg Attachment 647812 WAAAYYY better than stock. After the car got tuned it ended up making 317whp on 10psi. http://banzai-racing.com/dyno_charts...o_06-29-12.JPG |
4 Attachment(s)
When i picked her up from Banzai
Attachment 647806 Pretty much still cruised her. At this point i realized i wanted to start sliding her though. Attachment 647807 Attachment 647808 One of the first meets i brought it too. Realized quickly that its a dick magnet :icon_tdow:( lol Attachment 647809 |
6 Attachment(s)
Lookieee Lookie what we have here!! :gwink: A few months later i ended up picking up so Stance's from TougeFactory.
Attachment 647800 it was just time for an upgrade Attachment 647801 I also picked up some TC Sportline trailing arms and links Attachment 647802 Attachment 647803 Attachment 647804 Attachment 647805 Yay for suspension! http://fcdn.mtbr.com/attachments/san...-very_nice.jpg |
6 Attachment(s)
Sooo i set them too low to begin with.. TUCKING HARD!
Attachment 647794 Attachment 647795 See the small bottle cap?---^ haha And this is when i got it sitting good for now. not to much of a change besides the feel of the driving. Attachment 647796 Attachment 647797 Attachment 647798 Attachment 647799 I also started adding stickers to the back hatch.. cliche i know. idc FUCK YOU FADED PAINT!:( http://i1293.photobucket.com/albums/...psa492587a.jpg |
1 Attachment(s)
So I started sliding the car around a bit. Open lots things like that.
I definitely suck but working at it. Bought a new steering wheel as oem was huge to try and whip around. looks nicer too Attachment 647782 |
4 Attachment(s)
I got bored with my car and wanted to make it look a little more aggressive so i picked up some cheap knockoff wheels.
I know theyre knock offs, and idc. It is what it is for now. Attachment 647778 Looks okay. better than stock, horrible picture lol Still needed to adjust height Attachment 647779 I drove and ended up fucking up and flaring out my fender :icon_no2: (car is jacked up here) Attachment 647780 I had to actually drive this car to work the next day also and had no time to fix that so i just rocked it like this for a couple days Attachment 647781 |
Aaaaaaand theeeeeeeen??
|
3 Attachment(s)
Originally Posted by Riggs
(Post 11725285)
Aaaaaaand theeeeeeeen??
my bad man, been busy.. lol well i ended up getting a Tomei 2 way diff. my vlsd would shit out while i was sliding so i ended up putting this in Attachment 642361 Its much better now. Also i did a beginner event to break it in. Sorry theres no pics or vids though. but heres some random shots of the car Attachment 642362 Attachment 642363 |
1 Attachment(s)
My car was sitting at my friends for awhile so he decided to remove my ABS.. lol its cool i didnt want that anyways.
Attachment 642360 |
3 Attachment(s)
I ended up getting a blast pipe made for my car.
It's long i know. Attachment 642357 Attachment 642358 Attachment 642359 |
4 Attachment(s)
Finally after months of waiting my wheels came in!!! :evilgrin:
Attachment 642353 http://i1293.photobucket.com/albums/...ps731159a1.jpg Attachment 642354 they look good. But i went a tad toooo big in the rearrr... -_- Attachment 642355 Attachment 642356 Time to roll and pulll |
6 Attachment(s)
Took a couple nights of pulling... -__-
Attachment 642347 Its getting there! lol http://i1293.photobucket.com/albums/...psfb03b5fe.jpg Finally sitting better Attachment 642348 Attachment 642349 Attachment 642350 Attachment 642351 Attachment 642352 |
1 Attachment(s)
|
5 Attachment(s)
Got my car loaded up for a small event in Shawano Wi at USAir.
Attachment 642341 Attachment 642342 Theres not many pictures due to it being a beginner/ learning event but my friend got some mehh photos. Keep in mind im also not that great. Attachment 642343 Attachment 642344 and im just adding this pic because i like it. Attachment 642345 |
1 Attachment(s)
Decided to vinylwrap my car.
Got free vinyl courtesy of a hell project at work.. Attachment 642340 #becausefree |
5 Attachment(s)
Picked up some cheap off brand sideskirts.. They dont fit too horrible but needs some adjusting.
Attachment 642335 Attachment 642336 Then luckily Touge Factory had an Origin bumper in stock for me. I like not having to wait. This bumper fit pretty much like a glove too! Attachment 642337 Attachment 642338 Attachment 642339 Cars gonna look totally different |
5 Attachment(s)
Washed the car and prepped for vinyl...
Time to wrap. Attachment 642330 Let the fun begin. Attachment 642331 Attachment 642332 Attachment 642333 It looks like captain americas car! lol Attachment 642334 |
I did the vinyl over a 3 or 4 day period because well there was no rush and im lazy... lol :)
|
All times are GMT -5. The time now is 09:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands