RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Drifting (https://www.rx7club.com/drifting-226/)
-   -   4 speed drift trans?!?! (https://www.rx7club.com/drifting-226/4-speed-drift-trans-1084842/)

Alex Hoelzel 06-09-15 01:08 AM

4 speed drift trans?!?!
 
So........ i blew up my 13b and plan on moving on to a 5.3 lm7 with ls1/6 goodies. the plan is cheapness. i planed on getting a t56, but i cant find one in my area for a reasonable price. i know the t56 is the perfect and ideal transmission for this swap, but life is not perfect and ideal. i also have a problem with buying a $600-$800 engine and putting a $1500 transmission behind it.it just doesn't feel right. i searched around for a long time until i found out about muncie m22's and borg warner t10's. i am starting to love these transmissions. they both can easily handle the power of the 5.3 and could of a 5.7 or 6.0. from the reviews ive read they are stupid reliable and really cheap too!($400-$700) and for the cherry on top the m22 makes dog box whining noises, to cool. before you ask, yes it has been done before and it is cheap to do.


i do have some questions tho:
1) how would the gearing of the m22 or the t10 be with the turbo ii diff. these transmissions were made for american torque v8's so i thought they wouldn't be that bad. if it is off a little bit im not to worried as the t10 have some of the most customizable gear ratios out their.
2) would i have to make a custom trans mount?
3) what would the shifter position be like? i have seen the transmission on ls1's, but not in rx7's and never seen them used for drifting.

fyi:
-this is a drift car
-i know the transmissions will limit my top speed, but i don't race at huge tracks with +100mph drift entry.
- this will be my first time ever engine swapping a car.
- the m22's came in short and long gear ratios, which would be better.

i do learn from criticism, but pleas don't only think of ways this will not work, but ways it will work. let me know what you think!!

thanks

alex

joshuaput 06-09-15 04:59 PM

1) they make different gears for them. almost every one I have seen has different gear ratios in them.
2)yes
3)it will be close enough for a drift car. also some have different shifters on them. some are longer(further back) than others.

joshuaput 06-09-15 05:02 PM

Find one. put it on your engine. drop your engine in your car. you will most likely have to cut a hole in your trans tunnel for the shifter. I think they are mostly sideshift anyway. after driving it a few times buy different gears if you do not like it. or dont.

Alex Hoelzel 06-11-15 12:20 AM

Sounds good, now just gotta sell my broke 13b and figure out what to do for clutch hydrolics. Thanks for the help

joshuaput 06-11-15 10:10 AM

Racing Clutch Hydraulic Throwout Bearing - Speedway Motors, America's Oldest Speed Shop

Alex Hoelzel 06-11-15 01:53 PM

cool! thanks, but im starting to get sketched out by if my gear ratios are to far between for drifting. im starting to lean to a 350z transmission. cheap, but people say their to gears are to short for the torque of an ls engine. i thought i could get away with it as i am using a 5.3 lm7 with ls goodies. any comments on the 350z trans with ls1?
kit:
LSX LS1 LS2 LS3 LS6 LS7 LS9 L98 Engine to 350Z 370Z VQ Transmission Compound Adapter Plate
used with a 240sx:

which would you choose?


All times are GMT -5. The time now is 04:31 PM.


© 2024 MH Sub I, LLC dba Internet Brands