winnipeg 7's
04-08-11, 07:26 PM
#631
Senior Member
iTrader: (7)
Join Date: Aug 2007
Location: winnipeg
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Haha coming out. 45, 000 mile mazda rebuilt engine. Seized up end of last summer, couldnt even budge it with a 4 foot johnny bar. I think I pushed it more times then I drove it last summer anyways 
Gonna be swapping in a 15k series 8, wire tuck, v-mount, power fc, fuel pump and some other odds and ends. Already got my new catback
Gonna be swapping in a 15k series 8, wire tuck, v-mount, power fc, fuel pump and some other odds and ends. Already got my new catback
05-27-11, 10:43 PM
#637
Once and a while I try to get everyone together for a little BBQ/cruise, however sunday nights seem pretty dead (I know Im scared to go out) and the weather has been so shitty this year that nothing has really been planned yet.
I also know quite a few of our cars are still on jackstands, so thats another factor!
You on winnipegheights? Thats usually the first place I will post about meets, but I try to cross reference em in here too!
I am gonna try to work on a lil BBQ or something here soon!
I will let you guys know!
I also know quite a few of our cars are still on jackstands, so thats another factor!
You on winnipegheights? Thats usually the first place I will post about meets, but I try to cross reference em in here too!
I am gonna try to work on a lil BBQ or something here soon!
I will let you guys know!
05-28-11, 09:16 AM
#639
Yankle My Wankel
06-02-11, 09:07 PM
#640
Junior Member
Join Date: May 2011
Location: ottawa,canada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know this RX-7 for sale in Winnipeg?
Hello!
I am looking at the RX-7 for sale on autotrader.ca in Winnipeg. Have got good info on it from Gordon Mazda and the owner selling it as well as some info from Performance Mazda here in Ottawa:
1993
replaced engine
nice shape
155,000km on chasis
20,000km on new motor
Auto tranny
$13,000CDN
Anyone seen it "live"
Cheers!
Terry
I am looking at the RX-7 for sale on autotrader.ca in Winnipeg. Have got good info on it from Gordon Mazda and the owner selling it as well as some info from Performance Mazda here in Ottawa:
1993
replaced engine
nice shape
155,000km on chasis
20,000km on new motor
Auto tranny
$13,000CDN
Anyone seen it "live"
Cheers!
Terry
06-24-11, 07:31 AM
#641
Full Member
Join Date: May 2001
Location: Canada
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking at replacing the Clutch. What's everyone recommend? I have a Centerforce II clutch kit in right now. It's lived out it's use - 25 years old. Starting to slip really bad. Definitely need to replace it. The engine has been modified with a 13 B 6-street ported in Alberta mated with a Mikuni twin 44mm carb along with lots of other goodies. Love driving it and terrorizing 'stangs. Not the fastest out there but for owning this car for 29 years, (yep, the original owner), it is absolutely wonderful to drive.
I would really like to find a clutch kit here locally. Can someone suggest a place and a clutch kit make? Thanks.
I would really like to find a clutch kit here locally. Can someone suggest a place and a clutch kit make? Thanks.
04-19-12, 12:21 PM
#643
Hey Post whats new with your car this spring .
I bought eibach progressive spring kit and KYB GX to upgrade the original stock vert suspension. Alos got a new set of JasonS car mats and trunk liner . Also the Finishline rear bumper kit and T2 side skirts
Work is still being done slowly on the 79 T2 swap project
We spotted a Charcoal FB in Transcona this week turned off Regent , up Stapon towards tax center and Reenders........... anyone know who it was ?
I bought eibach progressive spring kit and KYB GX to upgrade the original stock vert suspension. Alos got a new set of JasonS car mats and trunk liner . Also the Finishline rear bumper kit and T2 side skirts
Work is still being done slowly on the 79 T2 swap project We spotted a Charcoal FB in Transcona this week turned off Regent , up Stapon towards tax center and Reenders........... anyone know who it was ?
04-19-12, 02:45 PM
#644
Junior Member
Join Date: Oct 2008
Location: Fort Saskatchewan, AB + Winnipeg, MB
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Awesome. My car is still at the shop waiting for new ring and pinion and an LSD rebuild. I am getting quite upset with the shop as it is taking way too long.
I completely forgot and apparently so did everyone else! I am surprised no one else posted it in here.
MAZDA MEET ON SUNDAY APRIL 22ND!
This was posted on WinnipegHeights. It will be at the Assiniboine park (zoo) parking lot. Unfortunately Heights is not loading for me right now so I cannot access the thread, but as soon as I can I will post it in here. I believe it is around 4. I hope some of you can make it out!
I completely forgot and apparently so did everyone else! I am surprised no one else posted it in here.
MAZDA MEET ON SUNDAY APRIL 22ND!
This was posted on WinnipegHeights. It will be at the Assiniboine park (zoo) parking lot. Unfortunately Heights is not loading for me right now so I cannot access the thread, but as soon as I can I will post it in here. I believe it is around 4. I hope some of you can make it out!
04-19-12, 03:00 PM
#645
Junior Member
Join Date: Oct 2008
Location: Fort Saskatchewan, AB + Winnipeg, MB
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Here it is: http://www.winnipegheights.com/showt...siniboine-park
I am not sure if you can access it or not so I will post the start of the thread.
I am not sure if you can access it or not so I will post the start of the thread.
First Mazda meet of 2012: April 22, 4PM at Assiniboine park
Sunday, April 22nd at 4PM
at the zoo parking lot inside Assiniboine park: we will be meeting for the first Mazda meet of 2012.
This is not just your standard Mazda meet, but also a farewell party for AverageJoe as he is making a big move to Calgary on the 25th.
The plan is to hang around at the park for a couple hours, have a little photoshoot, then out for a nice cruise and possibly some food and drink to cap off the night.
Lets hope for a great turnout and one awesome final adventure with Joe before he skips town.
Even if you dont own or drive a mazda, feel free to come out! (just dont make fun of our rotaries, haha)
See you all on the 22nd!
Sunday, April 22nd at 4PM
at the zoo parking lot inside Assiniboine park: we will be meeting for the first Mazda meet of 2012.
This is not just your standard Mazda meet, but also a farewell party for AverageJoe as he is making a big move to Calgary on the 25th.
The plan is to hang around at the park for a couple hours, have a little photoshoot, then out for a nice cruise and possibly some food and drink to cap off the night.
Lets hope for a great turnout and one awesome final adventure with Joe before he skips town.
Even if you dont own or drive a mazda, feel free to come out! (just dont make fun of our rotaries, haha)
See you all on the 22nd!
04-19-12, 05:09 PM
#646
Dude......
iTrader: (1)
Join Date: Aug 2006
Location: Manitoba
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Hey Post whats new with your car this spring .
I bought eibach progressive spring kit and KYB GX to upgrade the original stock vert suspension. Alos got a new set of JasonS car mats and trunk liner . Also the Finishline rear bumper kit and T2 side skirts Work is still being done slowly on the 79 T2 swap project
We spotted a Charcoal FB in Transcona this week turned off Regent , up Stapon towards tax center and Reenders........... anyone know who it was ?
I bought eibach progressive spring kit and KYB GX to upgrade the original stock vert suspension. Alos got a new set of JasonS car mats and trunk liner . Also the Finishline rear bumper kit and T2 side skirts
Work is still being done slowly on the 79 T2 swap project We spotted a Charcoal FB in Transcona this week turned off Regent , up Stapon towards tax center and Reenders........... anyone know who it was ?
I got a set of mats from JasonS last year too. They are quite nice, mine look better than stock.
04-20-12, 08:56 AM
#647
heres a couple shots of the front mats I had done . I also got him to make the first ever vert trunk liner . Sent him a template and he did one in black with just the rotor logo dead center . looks great but dont have a pic yet
