Who has these bolts?
I am looking for two M12 x 1.5 (fine thread bolts).
I need them to mount my engine to my engine stand. I have have so far gone to Home Depot, Brafasco and SB Simpson, they don't have it. Can someone tell me where I can buy two? Or does someone have two that I can buy or borrow? |
Try Cisco industrial, but it's a god dam paain to find anything metric, bspt,JDM, ukdm around here.......... eBay
|
Spaenaur
|
Surprisingly, when I had to buy a few, I think I found them at Canadian Tire. This is going back a few years though, and their selection was VERY small.
|
Thanks for the suggestions so far, I will give them a look tomorrow. Can't believe two bolts are stopping me from mounting my engine so I can mount all the external parts.
|
Ace Hardware has them if you have a store there. Good luck.
|
12X1.5.. bolt size is the same size as a wheel stud..would a stud fit?.or it it too coarse?
|
Found them at Napa, holly Crap they were expensive, $5.34 for 2 bolts.😖
|
Originally Posted by simgabe
(Post 11022328)
Found them at Napa, holly Crap they were expensive, $5.34 for 2 bolts.😖
|
Yup, and those NUTS hit my NUTS that made me go NUTS!
|
I have found that NAPA actually has great prices vs. other auto part stores.
|
I could have got ya those bolts REAL cheap Gabe.
ya know those HKS manifold studs?..12x1.25?I couldn't get any nuts around here,so I went to Fastener store in Perth..NOPE..But they sent me just 2 doors down.I got them for 20 cents each.. |
Next time try your nearest toyota dealer. They keep a selection of metric hardware. That's where I go when I need fine thread metric bolts. Last time they just gave me the bolts and told me to stop buy with coffee sometime.
|
Thanks Buggy, I'll keep that in mind next time. Actually I think I might stop by tomorrow, I need some bolts to mount my RE LIM. The ones I found today are grade 5, hope they have grade 8 (the bronze looking ones)
|
Don't know if you have a BOLT SUPPLY house I think they are just western canada around there , we have one in Saskatoon they are a great bunch of guys and have a full selection of bolts and fasteners, metric and standard if you need anything in the future . reasonable priced also . :) gerald m Ackland Grainger also carry a nice line of metric
Fabory USA Ltd. - Windsor, ON Distributor, Custom Manufacturer ISO/QS 9000 Supplier Of Metric Fasteners. Stocking A Complete Line Of Over 35,000 Different Items. Including: Hex, Socket, Shoulder, Flange & Eye Bolts, Nuts, Washers, Threaded Rod, Pins, Keys, Screws, Taps, & Dies, & Specials. Available In Steel, Stainless, Aluminum, Nylon, Brass & Titanium In Standard, Fine, & Extra Fine Threads. Engineering Assistance. Imperial Standards Also Available FCI Molded Products, Inc. - Concord, ON Distributor, Manufacturer, Custom Manufacturer ISO 9001:2000 certified manufacturer & distributor of standard & custom bolts including flush bolts, hanger bolts & metric bolts. Materials used include butyrate, acetal, polyethylene, ABS, nylon, polypropylene, polystyrene, polycarbonate, phenolic, PTFE, PVC, vinyl, spring steel & nickel. Services include zinc die-casting, metal stamping, printing & embossing. JIT delivery also available. Threadall Manufacturing Co. - Waterloo, ON Custom Manufacturer ISO 9001:2008 certified custom manufacturer of metric bolts. Types of bolts include hex bolts, square bolts, machine bolts, centerless ground bolts, carriage bolts, U-bolts, J-bolts & L-bolts. Bolts can be fabricated in lengths up to 48 in. & dia. up to 1/2 in. & in truss, truss slot & indented hex head configurations & UNC, UNF & 8 pitch styles. Metric & Acme thread style bolts can be fabricated. Meet ASTM standards. BeamClamp Div. of Kee Safety, Ltd. - Concord, ON Manufacturer, Custom Manufacturer, Service Company ISO 9001 certified. Manufacturer of special metric bolts including expansion anchors used to make connections to structural steel tube sections in construction applications. Stainless steel anchors are available in hot dip galvanized & zinc plate finishes with hexagonal shoulders. Anchors are suitable for use with rectangular, square & circular sections or other types of steelwork where access is restricted to only one side. Anchors are also available in special lengths Brand Names: BeamClamp, BoxBolt Fabory USA, Ltd. - Mississauga, ON Distributor, Custom Manufacturer ISO/QS 9000 Supplier Of Metric Fasteners. Stocking A Complete Line Of Over 35,000 Different Items. Including: Hex, Socket, Shoulder, Flange & Eye Bolts, Nuts, Washers, Threaded Rod, Pins, Keys, Screws, Taps, & Dies, & Specials. Available In Steel, Stainless, Aluminum, Nylon, Brass & Titanium In Standard, Fine, & Extra Fine Threads. Engineering Assistance. Imperial Standards Also Available. |
There's random bolts on the engine and car that will fit the front iron.
I think the transmission mount bolts for the crossmember to the chassis fit the front iron too. If you have spares around or have those pieces removed anyways. :) |
There is a company called FASTENALL that I have known about all along, but they don't sell loose pieces. You have to buy the whole box. They have everything imaginable.
|
Fastenal is a total pain in the ass. I tried to order some stuff through them, loose pieces not boxes and while the girl went through the whole order process with me I never once received a phone call about the order and when I finally was able to pick up a few that had come in half of them were wrong. Now I just go to Facca Fasteners. I think it's only London that has them but they can get me what I need most of the time.
|
Orion..must be funny when ya go to get bolts..
"hey Bro..let's Go to Facca.and then get some lunch" "Ya ok,but I get to do her first". "What"???? (hahahahahaha) |
Your local Mazda dealer probably has them in their bulk nuts and bolts
|
Went to the Mazda stealership today, they apparently can't find them in their parts manual.ROTFL
|
All times are GMT -5. The time now is 08:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands