2019 might be optimistic. :)

Part 47: Electronic Instrument Cluster Conversion
 

The viewers have voted! At the end of part 46 I presented a choice as to what you would like to see next and by a wide margin, we have a winner. Episode 47 of my '76 Mazda Cosmo restoration focuses on converting the instrument cluster from 40 year old analog mechanical gauges to electronic gauges. Not some gaudy named-after-a-US-state Digital glowing green digital panel slapped into a classic looking frame of course. Instead, a true integration of the existing gauges with modern electronics and control, taking information from an MS3-Pro fed CAN bus. Suffice it to say, there is a lot of delicate detail here, working with ridiculously tiny screws, machining of small parts and some electronics as well. There will also definitely be a part 2 of this episode, and possibly a part 3, because building an OEM integration level instrument cluster is no small task!

Schematics, code and board patterns from this video: https://www.aaroncake.net/76cosmo/cluster

Part 48: Electronic Instrument Cluster Conversion - Part 2 - My 76 Mazda RX-5 Cosmo
 

Well it's that time again. Yes, time for another installment of my '76 Mazda Cosmo restoration. In part 48, I continue the process of converting the old mechanical instrument cluster to a well integrated modern unit while retaining most of the appearance of that crazy time we call the late 1970s. TFT screens replace rolling odometers, stepper motors replace gauge movements and useless faux gauges which were nothing more than warning lights get turned into something more useful. Lots of tiny milling, lots of tiny hardware and some delicate welding. This finishes up the mechanical work on the cluster. As I predicted, there is going to be a third installment in which I design all the electronics to make the thing work.

Schematics, code and board patterns from this video: https://www.aaroncake.net/76cosmo/cluster

Bravo Aaron!
Slowly but surely... ;)

Very impressive work. This car will be quite something when it is complete.

Part 49 - Electronic Instrument Cluster Conversion - Part 3
 

It's been a long while, hasn't it? Who would have thought that retrofitting a 44 year old instrument cluster with modern electronics and building almost everything from scratch would be complicated? Yep, that's right. It's part 49 of my '76 Mazda Cosmo Restoration! And once again, I am continuing to work on the instrument cluster. This time I'm getting the final touches done by building the backlight boards, making the boards for the fuel and temp gauges, making some mistakes, and finishing up with all the cluster innards. It's another electronics episode mostly, which I know isn't my usual fare, however "electronics" is a big part of an electronic instrument cluster. And man, I'd have to say this is the most complicated single project I've done on this car so expect at least another episode to finish up the cluster.

Schematics, code and board patterns from this video: https://www.aaroncake.net/76cosmo/cluster
Patreon: https://www.patreon.com/aaroncake
Instagram: https://www.instagram.com/aaroncake_/

Part 50: Electronic Instrument Cluster Conversion - Part 4
 

Episode 50 of my '76 Mazda Cosmo Restoration is packed full of detail and information. Possibly more than any other episode released. Because after all, there's a lot to say about designing and building an Atmel 1284 powered CANbus communicating, stepper motor driving, TFT screen displaying, addressable LED controlling, rotary encoder twiddle accepting, heart of an electronic instrument cluster, circuit. That's what this episode primarily concentrates on with a bit more thrown in the middle. It's heavy on the electronics of course, and the last installment before final assembly of the instrument cluster. You might want to pour yourself a drink, sit back, brace yourself (that's what she said). By the way, I made an obvious mistake in this video. Can you spot it?

Schematics, code and board patterns from this video: https://www.aaroncake.net/76cosmo/cluster

Patreon: https://www.patreon.com/aaroncake

Instagram: https://www.instagram.com/aaroncake_/

Congrats on Episode 50, Aaron!

Hope you're keeping well. The Toronto (and area) rotorheads look forward to seeing you and your cars in better days ahead.

Part 51: Electronic Instrument Cluster Conversion - Part 5
 

Episode 51 of my '76 Mazda Cosmo restoration is here! First, let's talk length. That's what she said. I know it's ridiculously long. The title of my sex tape. Thing is, this video contains the entirety of final assembly of the electronic instrument cluster and it was an ordeal. Stuff broke, mistakes were made, more stuff broke, and add a long wait for replacement parts.And then I had the joy of reliving it all while editing this monstrosity. I could have split it into two, but then that would extend the instrument cluster to 6 parts and I just wouldn't have it. So dear viewer, I implore you to have the same experience watching it as I had making it. But here's the thing: it worked out rather well and even though I have months of programming to make this cluster actually do anything more than twiddle the needles, I think it was worth it.

Schematics, code and board patterns from this video: https://www.aaroncake.net/76cosmo/cluster

Patreon: https://www.patreon.com/aaroncake

Instagram: https://www.instagram.com/aaroncake_/

Part 52: Again With The Intercooler?! - Part 1 - My 76 Mazda RX-5 Cosmo Restoration
 

In any long running project, and no one will debate that this is a long running project, there are always things that one looks back on and reconsiders. And for years, there has been a big one in the engine bay: the intercooler. I was never happy with the angular placement and the almost improvised look of the plumbing. It seemed as though it was an after market kit made to fit a space. It was at odds with the engine bay. It ate at me. And after the instrument cluster I wanted to cut and weld! So I made the decision to seemingly go backwards and redo work already done. It was absolutely the correct decision.

Part 52!
Great to see you’re still chipping away at it! :)

Unfortunately I have about 1/7th of the time in my life after buying the stupid house to work on the car, but rest assured the Cosmo will be completed.

Hell, maybe I'll even find time to show up at a meet this summer in the RX-7 (as worn out as it is starting to look).

Completely understandable buddy. Life does get in the way. :)

we definitely have to see you out this season. It’s been too long. :cool:

Part 53: Again With The Intercooler?! - Part 2 - My 76 Mazda RX-5 Cosmo Restoration
 

In part 53 of my '76 Mazda Cosmo restoration, I finish the rework of the water to air intercooler I started in episode 52. With the ideal position established, all the tubing needed to be changed to match. And if I was doing that, well, I figured I may as well ditch the pedestrian silicone couplers and clamps for something much more awesome. This is another episode filled with cutting, grinding and TIG welding. The final product is exactly how it should have been from the start!

Part 54: Better HVAC Bracket and Improved Balls
 

Time to tackle two more aspects of my previous work I am unhappy with. In part 54, I'm re-fabricating the bracket used to adapt the Vintage Air Compac Gen 2 HVAC unit (parts 29-31) and fixing an issue with the front camber I created when I used Mazda 626 ball joints to allow use of FC RX-7 spindles (parts 39 - 40). Years of looking at my poorly designed HVAC brackets weighed heavy on my conscience and I knew I could do better. So too with the front suspension; I had come to the conclusion that there wasn't enough adjustability to allow proper alignment. This episode, I correct both these mistakes to end up with results I find truly satisfying.

Patreon: https://www.patreon.com/aaroncake

Instagram: https://www.instagram.com/aaroncake_/

Part 55: Air Suspension 1 - Rear Bags - My 76 Mazda RX-5 Cosmo Restoration
 

Episode 55 begins the project I've wanted to do since even before I bought the Cosmo: air suspension! In this video I modify the rear trailing arm to accept the air springs, create mounts to allow access to the bolts and fittings, then modify the frame rails with new spring perches. Lots of metal work and fabrication to get the rear end bagged. Enjoy!

Patreon: https://www.patreon.com/aaroncake

Instagram: https://www.instagram.com/aaroncake_/

Almost 2024 and the project is still going strong. :)