RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Canadian Forum (https://www.rx7club.com/canadian-forum-42/)
-   -   Should I get my engine rebuilt? (https://www.rx7club.com/canadian-forum-42/should-i-get-my-engine-rebuilt-451154/)

CSMCanuck 08-07-05 02:21 PM

Should I get my engine rebuilt?
 
So the car currently does not need it, but it has about 52000 miles, so chances are it will need it fairly soon. Should I have it rebuilt now, and save some money (less damaged parts) or just wait for it to pop?

eViLRotor 08-07-05 03:37 PM

That is only 83k km...not even an FD engine is taxed enough that it can't last till 100k, especially if it isn't flogged ;)

Not sure how much an FD-engine RRR is in Calgary, but around here it is close to $6000.

CSMCanuck 08-08-05 04:15 PM

I can rebuild my engine now for about 2000 less than if it was blown.

Hmm do I wait or go ahead now and save the money even though I don't know how long this engine has left in it.

krazykoncepts 08-08-05 04:59 PM

I'd say if you can afford to do it now. Both in terms of paying for it and have the allowable down time then do it now.

But if you need to drive the car now (it is summer after all) then wait till winter or even untill it blows.

twinturbofc 08-09-05 02:13 PM

If you wait for it to pop then you will be opening yourself up to replacing more parts then you need to be. Is the motor out now???? when mine popped i had to get a new housing and 2 new rotors

coldfire 08-09-05 02:43 PM

you could at least do a compression check to gauge the current health of the engine. although other factors, such as premature death through knocking/detonation, can't really be accounted for...

CSMCanuck 08-09-05 04:10 PM


Originally Posted by coldfire
you could at least do a compression check to gauge the current health of the engine. although other factors, such as premature death through knocking/detonation, can't really be accounted for...

Compression is very good, and the engine is strong, but I am affraid that it will be more prone to failures from detonation since it has over 80000 km on it.

edv 08-09-05 04:47 PM

I would have thought that detonation is independant of mileage.

CSMCanuck 08-09-05 06:05 PM


Originally Posted by edv
I would have thought that detonation is independant of mileage.

It just seems that so many FDs give out at about this millage that I am getting nervous.

black93RX7 08-10-05 11:11 PM

If the engine still runs good and has good compression don't waste your money.

Maybe start researching what to do when it does blow so you will be ready. Decide on what mods you want and maybe even learn how to rebuild it yourself.

Is your car stock? If so, do you plan on modding it?

CSMCanuck 08-10-05 11:23 PM

Car is near stock. Has Pettit ECU, DP and CB but thats it right now. I have future plans, but who knows when that will happen.

Terrh 08-11-05 08:43 AM

sounds like you are making mountains out of molehills.

I'd drive it till it pops, which could be 5+ years down the road... worry about rebuilding it then.

classicauto 08-11-05 10:54 PM

whats to worry?
drive it and enjoy it, if its really bothering you tear it down in the warm garage when the snow's flyin'
if you're really paranoid then baby it the rest of the season, thats not a whole shit load of miles anyway, my 87 has 110 on the orginal engine and still runs flawlessly...although ill probably be taking my own advice throughout the winter months...

just my 2 cents

R.P.M. 08-11-05 11:03 PM

I say pull it out, send it to me....I'll port it and rebuild it for ya. ;)

SevenHeaven 08-12-05 06:16 PM

Gee... Its not even broken in. My 7 is 20years old and has 200,000km on the original motor and has never been opened up. If it's healthy, then drive it!

Roshambo 08-12-05 06:32 PM


Originally Posted by SevenHeaven
Gee... Its not even broken in. My 7 is 20years old and has 200,000km on the original motor and has never been opened up. If it's healthy, then drive it!

Just FYI, he drives a 1994 FD3S with the 13B-REW motor which is not the poster boy of being reliable and lasting over 200,000kms like the unstressed NA rotary in your car.

SevenHeaven 08-12-05 06:52 PM


Originally Posted by Roshambo
Just FYI, he drives a 1994 FD3S with the 13B-REW motor which is not the poster boy of being reliable and lasting over 200,000kms like the unstressed NA rotary in your car.

I realize that, worked for Mazda for almost five years. But with proper percautions you will get more then 100,000km out of them.

SAiamNE 08-12-05 06:59 PM

Better yet.. Go buy one of those imported engines from Japan or whatever.. Rip it apart and rebuild it, keeping your original engine still running.. Once the engine is finished or your original blows then swap em..

Terrh 08-12-05 10:45 PM

except FD jspecs aren't cheap nor plentiful, like FC jspecs. :)

patrick4884 08-12-05 11:06 PM

as long as your metering pump works well and your cats aren't clogged (not that a rotary should have them) your engine should last a long time. I've had 10 first gens and 1 second and I beat the shit out of all but the most recent as now I have a kid. I had 2 motors go on me and one due to an overheated exhaust from a clogged precat and the other I was stupid enough top let my buddy reinstall my metering pump and he didn't adjust it and I was stupid enoughnot to check...I made about 100km from my driveway and dropped the rear rotor(car still did 155km/h on the highway with one rotor...took forever to get there but it did it. Long story short regular oil changes and proper maintenance, it should last you another 50-100,000 miles even if your running it hard (within reason)

Jrod04 08-13-05 06:31 PM

I have 192,000km on mine and it still runs great!


All times are GMT -5. The time now is 07:09 AM.


© 2024 MH Sub I, LLC dba Internet Brands