My Fc3s S5 Build thread!
#52
Howi, I know im sorry man I just cant dish out like 200$ on a decent camera because of not a good income atm, all the money goes to the fc hahah :P ill try my best though to find a camera
btw I will do a small update later today I shall ask my step dad if I can barrow his camera
Best regards Pat
btw I will do a small update later today I shall ask my step dad if I can barrow his camera
Best regards Pat
#53
Senior Member
iTrader: (2)
Join Date: May 2003
Location: Mississauga, ON
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Your Rising RPM photos are so much better than all the other photos LOL....
This is my personal camera. I honestly think it's the best camera in the world. With the X20 (next generation) out on the market, the X10 are really cheap now. They used to be $600.
It's basically a high-end point and shoot. These are some random sample photos I took:
Now imagine the photos you can take for your baby FC.
This is my personal camera. I honestly think it's the best camera in the world. With the X20 (next generation) out on the market, the X10 are really cheap now. They used to be $600.
Amazon.com: Fujifilm X10 12 MP EXR CMOS Digital Camera with f2.0-f2.8 4x Optical Zoom Lens and 2.8-Inch LCD: Camera & Photo
It's basically a high-end point and shoot. These are some random sample photos I took:
Now imagine the photos you can take for your baby FC.
#55
Your Rising RPM photos are so much better than all the other photos LOL....
This is my personal camera. I honestly think it's the best camera in the world. With the X20 (next generation) out on the market, the X10 are really cheap now. They used to be $600.
Video Link: http://www.amazon.com/Fujifilm-X10-Digital-Camera-f2-0-f2-8/dp/B005KBB79C/ref=sr_1_1?ie=UTF8&qid=1374076543&sr=8-1&keywords=fujifilm+x10
It's basically a high-end point and shoot. These are some random sample photos I took:
Now imagine the photos you can take for your baby FC.
This is my personal camera. I honestly think it's the best camera in the world. With the X20 (next generation) out on the market, the X10 are really cheap now. They used to be $600.
Video Link: http://www.amazon.com/Fujifilm-X10-Digital-Camera-f2-0-f2-8/dp/B005KBB79C/ref=sr_1_1?ie=UTF8&qid=1374076543&sr=8-1&keywords=fujifilm+x10
It's basically a high-end point and shoot. These are some random sample photos I took:
Now imagine the photos you can take for your baby FC.
#56
Hey guys sorry for no update in a long time... had a few things to do besides the fc but going hard at it now will update on a every day basis!!
What I have done since the last update.
-got a shop with a lift tools welders and all the goodies!!
- modded a mishimoto FD rad for the fc vmount
-got a rotisery for the fc from andrew cassidy (thanks again buddy)
-preping the whole chassis (cleaning, cutting, stitch welding,)
-cage date is booked for jan 11 will have tube frame front and rear (past the strut towers) by rally race in mississauga
-got MMR delrin bushings but might be up for sale want some solids for the rear end
-reinforced the front and rear subframes and stitch welded them
And thats about it for now!!
What I have done since the last update.
-got a shop with a lift tools welders and all the goodies!!
- modded a mishimoto FD rad for the fc vmount
-got a rotisery for the fc from andrew cassidy (thanks again buddy)
-preping the whole chassis (cleaning, cutting, stitch welding,)
-cage date is booked for jan 11 will have tube frame front and rear (past the strut towers) by rally race in mississauga
-got MMR delrin bushings but might be up for sale want some solids for the rear end
-reinforced the front and rear subframes and stitch welded them
And thats about it for now!!
Last edited by 13BbackFire; 10-03-13 at 09:56 AM.
#58
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Instead of buying a Camera,..why not "borrow a HOWI"???
Ron HOWI..produced RUSH...lol!
That camera is amazing..Your car is coming along too Pat..get er dun!
Ron HOWI..produced RUSH...lol!
That camera is amazing..Your car is coming along too Pat..get er dun!
#63
Thanks turblown
#66
Here is a pic for turblown 38mm tail watse gates!! Will need to order 17-18 psi springs, and modify the dumps to fit where I want em!!!!
Also what I am currently doing is grinding the uni frame to clean it up, mock up v mount rad support and primer it!!!
Also what I am currently doing is grinding the uni frame to clean it up, mock up v mount rad support and primer it!!!
#69
Small update!!! So had a few hours to spare so I went and worked on the fc!! Im modifing the rebar face plates with thicker stainless steel and will have a bolt on design tube re bar!!!. The plate is not welded on in the picture, just let it sit on the frame end to see how it fits, have to drill holes and weld nuts on the back before I can weld them on!!!!
Will hopefully post another update later on depending if I get some work done!!!
Thanks!
Will hopefully post another update later on depending if I get some work done!!!
Thanks!
#70
Hey guys small update!!!.
So I welded the new frame end plates on turned our great just have to clean them and primer it for now untill I get a pipe bender to do the front crash bar 0beam!
Also Im throwing the fc on a rotisery tomorrow just have to buy bolts to assemble it!! And after shes on the roller time to start cleaning and preping it for the cage!! (Thank you andrew cassidy for lending me the fc rotisery)
The picture with the hole in the pants is my leg that cought on fire lol... remember kids when cutting sh*t off dont aim the sparks towards anything flamable including your selves lol
Here are some pictures of the progress
Thanks for following my build guys
So I welded the new frame end plates on turned our great just have to clean them and primer it for now untill I get a pipe bender to do the front crash bar 0beam!
Also Im throwing the fc on a rotisery tomorrow just have to buy bolts to assemble it!! And after shes on the roller time to start cleaning and preping it for the cage!! (Thank you andrew cassidy for lending me the fc rotisery)
The picture with the hole in the pants is my leg that cought on fire lol... remember kids when cutting sh*t off dont aim the sparks towards anything flamable including your selves lol
Here are some pictures of the progress
Thanks for following my build guys
#71
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
LOL on the pants leg!
I was grinding a seat rail and I couldn't figure out why my Big toe was hot.
Stuff flew onto my shoe and burnt right through..
Funny thing is,I have bought new part since that has happened....BUT I still wear the shoes,Daily!
I know where my priorities lay!
I was grinding a seat rail and I couldn't figure out why my Big toe was hot.
Stuff flew onto my shoe and burnt right through..
Funny thing is,I have bought new part since that has happened....BUT I still wear the shoes,Daily!
I know where my priorities lay!
#72
LOL on the pants leg!
I was grinding a seat rail and I couldn't figure out why my Big toe was hot.
Stuff flew onto my shoe and burnt right through..
Funny thing is,I have bought new part since that has happened....BUT I still wear the shoes,Daily!
I know where my priorities lay!
I was grinding a seat rail and I couldn't figure out why my Big toe was hot.
Stuff flew onto my shoe and burnt right through..
Funny thing is,I have bought new part since that has happened....BUT I still wear the shoes,Daily!
I know where my priorities lay!
#73
Aleight guys I got a bit bigger of an uodate today. So I finally put the fc on the rotisery with my best pal joe from function racing/sigmatimeattack!. Gezz guys let me tell you this.. the chassis rotisery works great but had to modify alot of the mounting points in order for it to work for my fc. I made the front frame plates which I had to cut and reweld the mounting brackets, extend them and such for it to sit flush and sturdy!! Once again thank you Andrew cassidy for lending me the rotisery. So I was working on the fc till 3am on friday right after work, went home slept till 6 630am and went back to finish so yesterday me and joe start installing the fc on this cool tool and thinking and re engineering the rotisery to fit my fc chassis so we started at 5 pm 530 and finished the whole thing at 135am... crazy night of fabbing and making it work so now its time for bed goodnignt rx7 club and enjoy the journey of my time attack build!
Will post some awesome pics below
Will post some awesome pics below
#74
Heyooh rx7club,
Got a small update for you fellow rotor heads!!.
So I started removing the under coat and jesus its a killer.. best way to do it is torch, flat metal scraper and wire wheel to clean it off after!!
Also I worked on my rear areo, I cut out the back part of the 1/4 to make it flat so the wheel turbulence can escape through a custom diffuser I will be making, I looked at it 10000x before I started cutting stuff off and to me its honestly the best thing I can think of to reduce rear wheel drag!!
Let me know what you guys think
I will buy some diebond this week so I can make a rear wheel well diffuser.
Thank you guys
Beat regards Pat burdon / 13bbackfire
Got a small update for you fellow rotor heads!!.
So I started removing the under coat and jesus its a killer.. best way to do it is torch, flat metal scraper and wire wheel to clean it off after!!
Also I worked on my rear areo, I cut out the back part of the 1/4 to make it flat so the wheel turbulence can escape through a custom diffuser I will be making, I looked at it 10000x before I started cutting stuff off and to me its honestly the best thing I can think of to reduce rear wheel drag!!
Let me know what you guys think
I will buy some diebond this week so I can make a rear wheel well diffuser.
Thank you guys
Beat regards Pat burdon / 13bbackfire