Fd going to calgary
Im taking my FD down to calgary May 8th to rx7 specialties for my new motor/ turbos, fuel pump power fc, intake, clutch and a few other little things installed so if you see a white FD being towed on a uhall give me a wave. Hopefully everything works out and ill be driving it back May longweekend.
|
Depending on how busy adam is. I can pop in now and then to give you updates. I help around the shop for time to time. Jim is a real good mechanic so your car is in good hands.
|
Originally Posted by Alak
Depending on how busy adam is. I can pop in now and then to give you updates. I help around the shop for time to time. Jim is a real good mechanic so your car is in good hands.
|
Adam should tear his car apart..... and rebuild that would be sweet.. but before that he should Dyno it once just for some knowledge fo where he is sitting right now for power.....
i was there a few weeks ago picking up some flywheel dowel pins for a shop that i'm getting a Job at in Red Deer "Light Speed Inovations" they are building a new shop and said that when their new shop is built they will take me on as a apprentice A.S.T. (Automotive Service Technician, for those who dont know) i'm hyped, until then i'm gonna try to make some money....... i want to see that White FD..... you should stop by my work.... lol i wanna see some of the FD's in the area..... have to hook up with you guys some time.... but untill then... Prôdigy |
Originally Posted by Prôdigy2nd
Adam should tear his car apart..... and rebuild that would be sweet.. but before that he should Dyno it once just for some knowledge fo where he is sitting right now for power.....
i was there a few weeks ago picking up some flywheel dowel pins for a shop that i'm getting a Job at in Red Deer "Light Speed Inovations" they are building a new shop and said that when their new shop is built they will take me on as a apprentice A.S.T. (Automotive Service Technician, for those who dont know) i'm hyped, until then i'm gonna try to make some money....... i want to see that White FD..... you should stop by my work.... lol i wanna see some of the FD's in the area..... have to hook up with you guys some time.... but untill then... Prôdigy Im going to post pics of it going down this monday where is your shop located in red deer???? |
mmmmmmm
so Hot.... qeustion... where did you find that liencse plate.. i want one..... for when i get my FD.FC etc.... i love those.... i'd put them on if i ever puposely ripped past a photoradar van.... (with no one in it) mmmmm i like it..... Prôdigy |
haha ya i got it off ebay :)
|
They have like 3 white FD's there now.. I wanna see a nice yellow!
|
Originally Posted by No-Pistons-TT
Im taking my FD down to calgary May 8th to rx7 specialties for my new motor/ turbos, fuel pump power fc, intake, clutch and a few other little things installed so if you see a white FD being towed on a uhall give me a wave. Hopefully everything works out and ill be driving it back May longweekend.
|
Ya, I havent even been there in months. Last time I was there, they were cleaning out the shop. You should have seen the amount of crap they got rid of.
|
Originally Posted by Alak
Ya, I havent even been there in months. Last time I was there, they were cleaning out the shop. You should have seen the amount of crap they got rid of.
|
I drove past the other day, and they had all the FD's pulled out front. I didn't know that place could hold so many cars.
|
1 Attachment(s)
Im surprised they could fit all the junk they had in there inside there.
I have a couple pics of a pile of shortblocks. There must be fifty. Sorry for the low quality. |
NLR tags... :P you must know Pawel and Shawn ^_^
|
NLR :) Fat shawn haha... Yeah kayle and i both know those two. They are part of the club. WetDreams.. What car do you drive in e-town? You've probably seen my car before if you've been to UC for any meets
|
I heard there's a 20b FD up there with a bit of an issue with RX-7 Specialties. Don't know much about it. Anybody?
|
hahaha a lil bit of an issue? aww man that thing has been there forever! Just talk to crazyrx7. he's buddies with the guy with the 20b FD.
|
Originally Posted by No-Pistons-TT
Im taking my FD down to calgary May 8th to rx7 specialties for my new motor/ turbos, fuel pump power fc, intake, clutch and a few other little things installed so if you see a white FD being towed on a uhall give me a wave. Hopefully everything works out and ill be driving it back May longweekend.
Get used to towing your RX-7 around on a trailer. thats about all it's gonna do once thier done with it. i've been towing mine around from shop to shop for over 2 years now after they rebuilt mine. they got my cash and that was it. there's a whole lot more of the story too. you should take it to mazda when you get it back and get a compression test. if it's under 100 psi on a 3rd gen, it needs a rebuild. my "new" engine came in at 70 psi. Adam will tell you that cranking compression doesn't matter.... how else are you supposed to do a compression test? this is the guy doing your car. i wish you good luck, hope you have'nt paid for it yet... |
long weekend came and gone did u get your car out kayle... i think that be you
|
Originally Posted by sirx7
long weekend came and gone did u get your car out kayle... i think that be you
|
situations came up and it was ready hopefully wednesday now
|
Oh dear god, here we go boys and girls. The fun has officially started. Someone please tune the Jepordy music......
Kayle, i hope it works out ok and you get it back right away in one piece. |
Suprise, suprise. Let us know when you get it back and in what condition.
|
uh...oooooooooohhhhh. sounds like trouble. when you get your car back with the engine compression at 60psi i'll race you for pink slips in this wheelchair. i'll win becuse the wheelchair will work so you may aswell hand your keys over now. you have no idea what painful experience lies ahead for you now.
http://www.orlandoscooterrentals.us/...wheelchair.jpg |
All times are GMT -5. The time now is 12:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands