RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Build Threads (https://www.rx7club.com/build-threads-294/)
-   -   Replacing my clutch, need some advice (https://www.rx7club.com/build-threads-294/replacing-my-clutch-need-some-advice-993251/)

rotorpride 03-31-12 08:43 PM

Replacing my clutch, need some advice
 
My clutch in my vert is finally starting to go, and i'm looking for some pointers on the work ahead of me. Any special tools and advice that I should know?? Or anything else you can think of..

ImpartialMouse 03-31-12 08:48 PM


Originally Posted by rotorpride (Post 11038710)
My clutch in my vert is finally starting to go, and i'm looking for some pointers on the work ahead of me. Any special tools and advice that I should know?? Or anything else you can think of..

I don't think replacing a clutch can be considered a build.

If you really think you will have trouble replacing the clutch get a Haynes manual. You just need basic tools and you should be able to get your car running again in 3 hours. Remember to take off the slave cylinder or you will get frustrated that your can't get the transmission more than 2 inches from the engine.
Also if you have to ask how to change the clutch, don't even try to remove the pilot bearing.

When I changed my clutch the first time I used Mitchell on Demand, but most people don't have access to that.

Next time I think you should search or post in the right section before asking basic questions.

rotorpride 03-31-12 09:27 PM

Wow thanks ass hole. I'm new to the site and wasn't too sure where to post it. All im asking for is so advice on how tough of a job it is on an fc the only clutch ive replaced was in a 240 s13. So go fuck yourself and quit being a hater

RoTerd 03-31-12 09:34 PM

dude we we know how to change a clutch we are just asking for fuckin advice or if there are any tips or trick to change it with ease. every car has a trick or some type of tool to make the install easier and reduce the amount of time we have to spend underneath the car. So why don't you shove you advice back up your ass and shit it out on some one else s post,

ImpartialMouse 04-02-12 12:49 PM


Originally Posted by rotorpride (Post 11038760)
Wow thanks ass hole. I'm new to the site and wasn't too sure where to post it. All im asking for is so advice on how tough of a job it is on an fc the only clutch ive replaced was in a 240 s13. So go fuck yourself and quit being a hater

Honestly I thought I was being nice. I gave my advice, so sorry it wasn't what you were looking for. I simply told you what I have forgotten in the past and what you should look out for.
I think you should be glad somebody actually responded so lightly.

Good luck, and that's all I will say.:facepalm:

JerryLH3 04-02-12 03:24 PM

You guys won't last long with attitudes like that. But anyhow,

http://lmgtfy.com/?q=clutch+change+site%3Arx7club.com

Pay careful attention to about the fifth result down.

http://www.mazdatrix.com/ftools.htm

Buy the third part down. From what I hear, it is the best $100 you will ever spend in your life.

Hope that helps. You don't always get the answer you want right away on this forum, but there's no need for that kind of response. He was trying to help.

SirCygnus 04-02-12 06:08 PM

well, one would think if youve done it before, you would know what you are getting into. its just like almost every rwd car.

AGreen 04-02-12 08:41 PM

https://encrypted-tbn1.google.com/im...Tz-S12uhowXcOA

worst

build thread

ever

SirCygnus 04-02-12 08:52 PM

http://i.qkme.me/3oloi3.jpg


All times are GMT -5. The time now is 03:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands