My 89 T2 Build: will I ever finish something?
Hello All,
Some of you may have remembered my 1987 Base Rx7 build back in the day about 5 years ago or so. Did a lot of work to it, but then ended up parting it out and selling my FC parts and crap because I got into the 3rd gen Rx7 realm. I started a build thread on my FD, well I had two, and then ended up parting out my 20B and sold my FD. I did not have a connection with either of my FDs. I actually started missing my FC. I enjoy the lines more than the FD for some reason. Anyways over the years I have owned over 10 2nd gens and 2 3rd gen Rx7s. My friends get worried every time I own a 2nd gen in fear that I'll part it out and scrap the shell. After all, that is pretty much what I did. Are you going to get to the build story yet? Yes, yes I will lol. The start of it So about a week ago (around June 20, 2017) I was searching craigslist like I always do. I had recently purchased a 1990 miata for the track since it is a less expensive car to maintain in theory so I was not intending on buying another car. (About a month ago I owned about six (6) cars and now I was down to only two. ) When I was searching on craiglist I noticed an 89 T2 for sale that had recently price dropped from $4500 to $2500. Out of my curiosity, I of course texted the person asking to go check it out. The 7 had the following work done to it: 1) PBM $1400 coilovers 2) PBM Rear camber arm 3) some konig 17" white rims 4) walbro fuel pump 5) partial emissions delete 6) CX racing front mount intercooler 7) HKS BOV 8) some made in Japan exhaust 9) downpipe 10) JDM S5 engine 11) GReddy comp tube 12) Duraflex front bumper 13) JDM flash to pass lenses w/ working lights So I went to check the 7 out. Now usually when I go to look at a car I care mainly for body damage and that there is no rust. The paint really doesn't concern me as much as I can paint. But rust is key. Well this car apparently was originally was from Texas so it was supposed to be a clean body. When I got there, the kid had spray painted the car with white spray paint in spots. The body looked semi clean with exception of the dents on the passenger side rear 1/4. The undercarriage was harder to see since the car was sitting so low. But all in all it was in decent shape. The front duraflex bumper was super ugly IMO and it needed to go. Right off of the bat I knew I wanted it, but I did not want to pay $2500. Hell the most I have ever paid for an FC was $1040 and that was for a clean 88 T2. Pics from CL add My initial intention was to part this out. Seemingly good compression engine, good suspension, add-ons, hell I could triple the amount I paid for it. I told myself that if there were any areas of rust on the car that I could push my fingers through or something similar I would part it out and scrap it. Well...When I was finally able to get it in the garage, got it on stands, to my relief, there was only pinch weld damage, but nothing horrible. The body was still solid. Someone had undercoated the car before. Maybe it saved it, maybe it is just a cover, but from what I could tell it is still a solid little car. What is the purpose of this build? The purpose of this build is really just to drive it. There are a few things I need to fix that really bug me. I would like to get it up and running again for PG2 this year, but who knows. I plan to run the stock turbo and injectors until the engine pops. I plan to run the Adaptronic M1200 w/ smart coils first. My buddy Shawn at Turblown/Turbosource is going to help me tune it (and wire it in right buddy? LOL). So now my build saga begins.... Enjoy the show, I do hope to gain conversation for this build and suggestions. I will update often and have about 70 pics already. Each day or week I will update accordingly. Thanks again , Nick |
https://cimg6.ibsrv.net/gimg/www.rx7...11b561a98.jpeg
My buddy driving it home https://cimg7.ibsrv.net/gimg/www.rx7...963751b4d.jpeg Parked on my parking pad https://cimg9.ibsrv.net/gimg/www.rx7...2f940fc62.jpeg Front shot of duraflex bumper https://cimg8.ibsrv.net/gimg/www.rx7...8d4670686.jpeg Spitting fire https://cimg6.ibsrv.net/gimg/www.rx7...32dce6304.jpeg Up on jack stands. The only body damage that was visible. https://cimg7.ibsrv.net/gimg/www.rx7...c7e99c65a.jpeg OMG UGLY job on the intercooler piping. <br/><br/>I am missing the bottom brace/support from this side if anybody has one they'd sell please let me know. https://cimg8.ibsrv.net/gimg/www.rx7...d88639cf6.jpeg fender damage. Looks like someone did a shitty job repairing it too. https://cimg9.ibsrv.net/gimg/www.rx7...686221c4c.jpeg Front shot. |
Prepare yourself for the worst hack job of an intercooler piping spots ever. The PO did not know what he was doing:lol:
https://cimg0.ibsrv.net/gimg/www.rx7...63e9fc64d.jpeg Hackjob on the passenger side intercooler piping hole https://cimg1.ibsrv.net/gimg/www.rx7...d54d09c6e.jpeg even worse on the driver side https://cimg6.ibsrv.net/gimg/www.rx7...dcb36e0a5.jpeg Chassis harness damage https://cimg6.ibsrv.net/gimg/www.rx7...84f33f399.jpeg Started removing the intercooler piping https://cimg8.ibsrv.net/gimg/www.rx7...1451e40ee.jpeg front bumper and intercooler removed https://cimg9.ibsrv.net/gimg/www.rx7...3e34c112a.jpeg Nice shot of the samco hoses and koyo radiator. <br/><br/>Oh I forgot to mention the car has a dual belt alt pulley, but the bolt to tighten the alt was NOT EVEN INSTALLED! https://cimg0.ibsrv.net/gimg/www.rx7...f1a9169e8.jpeg Cleaned up some grease from the driver side https://cimg1.ibsrv.net/gimg/www.rx7...8252bb7cd.jpeg cleaned up the passenger side a little |
https://cimg7.ibsrv.net/gimg/www.rx7...51c54481b.jpeg
three 10mm bolts near the front window https://cimg8.ibsrv.net/gimg/www.rx7...48a535908.jpeg Removed the dash. https://cimg9.ibsrv.net/gimg/www.rx7...1221e7d47.jpeg what a mess. https://cimg0.ibsrv.net/gimg/www.rx7...699adff65.jpeg Mess of wires. removing the security system. https://cimg1.ibsrv.net/gimg/www.rx7...809f0b23d.jpeg Ready to delete/remove the sound deadening material and use POR-15 to seal it up. https://cimg2.ibsrv.net/gimg/www.rx7...831101f70.jpeg Mess like woah https://cimg3.ibsrv.net/gimg/www.rx7...434dea167.jpeg Yuck https://cimg4.ibsrv.net/gimg/www.rx7...af4ae8721.jpeg Nice color scheme https://cimg5.ibsrv.net/gimg/www.rx7...b3ecd8ad9.jpeg Removed the engine harness. FOR SALE https://cimg6.ibsrv.net/gimg/www.rx7...7d48e586d.jpeg Removed the ECU. FOR SALE |
Sound deadening material removed
https://cimg0.ibsrv.net/gimg/www.rx7...1ee146eea.jpeg
Got 15lbs of dry ice. Ran $9.72. https://cimg2.ibsrv.net/gimg/www.rx7...ab06a2547.jpeg Before. https://cimg3.ibsrv.net/gimg/www.rx7...a59323972.jpeg During.... https://cimg4.ibsrv.net/gimg/www.rx7...113f6b022.jpeg After... https://cimg5.ibsrv.net/gimg/www.rx7...2187d9dea.jpeg As you see the driver side floor plug was out. Does anybody have suggestions to secure that plug back to the floor?<br/><br/> https://cimg6.ibsrv.net/gimg/www.rx7...d9d7d7898.jpeg https://cimg7.ibsrv.net/gimg/www.rx7...c362d5a5a.jpeg https://cimg8.ibsrv.net/gimg/www.rx7...a44ca150a.jpeg Pretty much done. I just need to figure out how to remove the tunnel deadening and the material by the foot areas. |
ABS removal
Ok guys/gals. I need some advice as how to run the ABS delete.
https://cimg5.ibsrv.net/gimg/www.rx7...cf5e1b5e5.jpeg ABS removal... https://cimg6.ibsrv.net/gimg/www.rx7...14b9afcf7.jpeg Why I hate ABS (well just that it leaks brake fluid and destroys paint) https://cimg7.ibsrv.net/gimg/www.rx7...de0064b70.jpeg https://cimg9.ibsrv.net/gimg/www.rx7...a7fca21c5.jpeg Rough sketch of brake diagram https://cimg8.ibsrv.net/gimg/www.rx7...14719acb7.jpeg a box of deadening material and the mats under the bins, rear hatch carpet, and spare trunk area. I will weigh it today to see how much weight was removed. That is all for now. I am making some Nylon braided oil cooler hoses for the oil coolers. Thought I had some parts leftover from my 20b Build, but could not locate where my dang 16mm x 1.5 x -10an adapter was :( Stay tuned. -Nick |
Looks like a solid start. Damn that ECU and wiring is tempting....
|
Originally Posted by 82transam
(Post 12195528)
Looks like a solid start. Damn that ECU and wiring is tempting....
lol right? but shoot me an offer. It's of no use to me now. |
Yesterday I got to weighing what I removed so far for sound deadening and unnessary padding and it came to 27.6lbs.
I still have to remove the deadening in the storage bin area, trans tunnel area, and the footrest areas. it should be about 40lbs of material removed. Also, I brought the carpet to the cleaners to get cleaned. It came back bleached and I wasn't too happy about that. So I'll need to determine what I should do for carpet now. I will likely just keep it for now and change it out later. Who knows lol. parts I need for yet: two s5 fenders, s5 front bumper, underbody engine shield (will likely just get one made out of aluminum), new hood release cable (I shattered mine), shifter rebuild kit (mines wiggly), POR-15 for coating the interior floorboards, probaboy more. thoughts on paint: should I keep it white or use up my midori green I had from my rx8 build? |
What was happening with that intercooler installation :(.
|
Originally Posted by Jager
(Post 12198418)
What was happening with that intercooler installation :(.
Previous owner must have been on drugs or drunk I think. Horrible job for sure. |
Originally Posted by Broke_A_Baller
(Post 12195405)
https://cimg7.ibsrv.net/gimg/www.rx7...51c54481b.jpeg
three 10mm bolts near the front window https://cimg8.ibsrv.net/gimg/www.rx7...48a535908.jpeg Removed the dash. https://cimg9.ibsrv.net/gimg/www.rx7...1221e7d47.jpeg what a mess. https://cimg0.ibsrv.net/gimg/www.rx7...699adff65.jpeg Mess of wires. removing the security system. https://cimg1.ibsrv.net/gimg/www.rx7...809f0b23d.jpeg Ready to delete/remove the sound deadening material and use POR-15 to seal it up. https://cimg2.ibsrv.net/gimg/www.rx7...831101f70.jpeg Mess like woah https://cimg3.ibsrv.net/gimg/www.rx7...434dea167.jpeg Yuck https://cimg4.ibsrv.net/gimg/www.rx7...af4ae8721.jpeg Nice color scheme https://cimg5.ibsrv.net/gimg/www.rx7...b3ecd8ad9.jpeg Removed the engine harness. FOR SALE https://cimg6.ibsrv.net/gimg/www.rx7...7d48e586d.jpeg Removed the ECU. FOR SALE |
This looks like a really fun build! Not many white on blue turbo s5's out there.
|
Pretty substantial update
Ok all,
It has been a while since I posted an update, but it was because I have been working on getting my car back together and ready to be wired up with the ecu. Before I post a massive amount of pics I wanted to give you a rundown on what I did since I last posted. I sold the 17x7.5 + 37 Konig rims w/ 205 wide toyo tires and replaced them for some 5zigen 17x9 +35 245 45 17 tires. I personally do not like the 45 series sidewall, but they are cheap tires and I will hopefully burn them off and get new tires by proving grounds 2. I cleaned up the interior, ran my battery cables, put most of the interior back in. cleaned up some of the engine bay crap that was there. I ordered: 1) Adaptronic m1200 2) 4 smart coils 3) injector clips 4) some other clips 5) raychem dr 25 heatshrink 6) broadway mirror (because that review mirror sucks) I probably forgot some things, but whatever. Battery setup For my battery relocation I ended up deciding to run the battery in the rear spare tire location. SO what I used wsa the largest size that was readily available to me, which was 1/0 gauge. I ran one from the starter to the battery location for the positive. Used 4g for the oem relay box to run to the positive location as well. Then for the negative I ran one from the engine to the battery location and then another from the chassis to the battery location. I will just get on to the pics now. Patience and enjoy:nod: |
https://uniim1.shutterfly.com/ng/ser...643104/enhance
"NEW" fenders and bumper (now is hacked up and I am waiting for a new S5 https://uniim1.shutterfly.com/ng/ser...643154/enhance 5ZIGEN RIMS https://uniim1.shutterfly.com/ng/ser...643150/enhance https://uniim1.shutterfly.com/ng/ser...643133/enhance CUTTING THE BUMPER V1 https://uniim1.shutterfly.com/ng/ser...643162/enhance https://uniim1.shutterfly.com/ng/ser...643128/enhance I need these pieces on each side if anybody has one? https://uniim1.shutterfly.com/ng/ser...992858/enhance |
Placement of leash board
https://uniim1.shutterfly.com/ng/ser...992861/enhance
https://uniim1.shutterfly.com/ng/ser...992856/enhance https://uniim1.shutterfly.com/ng/ser...992854/enhance https://uniim1.shutterfly.com/ng/ser...992851/enhance https://uniim1.shutterfly.com/ng/ser...992858/enhance https://uniim1.shutterfly.com/ng/ser...992847/enhance BREAKER https://uniim1.shutterfly.com/ng/ser...992847/enhance |
Battery cable location
https://uniim1.shutterfly.com/ng/ser...992837/enhance
https://uniim1.shutterfly.com/ng/ser...992837/enhance https://uniim1.shutterfly.com/ng/ser...992834/enhance https://uniim1.shutterfly.com/ng/ser...992848/enhance https://uniim1.shutterfly.com/ng/ser...992833/enhance https://uniim1.shutterfly.com/ng/ser...992832/enhance RUBBER GROMMETS USED https://uniim1.shutterfly.com/ng/ser...992829/enhance SECURING THE CABLES https://uniim1.shutterfly.com/ng/ser...992827/enhance https://uniim1.shutterfly.com/ng/ser...992822/enhance https://uniim1.shutterfly.com/ng/ser...992825/enhance |
https://uniim1.shutterfly.com/ng/ser...992830/enhance
https://uniim1.shutterfly.com/ng/ser...992818/enhance https://uniim1.shutterfly.com/ng/ser...992814/enhance https://uniim1.shutterfly.com/ng/ser...992806/enhance BECAUSE I HAVE KIDS LOL https://uniim1.shutterfly.com/ng/ser...992808/enhance https://uniim1.shutterfly.com/ng/ser...992815/enhance https://uniim1.shutterfly.com/ng/ser...992807/enhance KIDS JUST WOKE UP LOL https://uniim1.shutterfly.com/ng/ser...992801/enhance https://uniim1.shutterfly.com/ng/ser...992795/enhance |
|
ALRIGHT....
sorry about the crazy amount of pics and posts, but that was pretty much what I have been doing since the last updated posting. Any question or input please feel free to chime in. Thanks again for looking. -Nick |
ECU has arrived!!!
Hello all,
Looking like Tuesday next week we'll be getting this M1200 modular ECU installed. In the meantime I have acquired a parts FC that i will be parting out and selling the roller. I will be doing the following: 1) s4 lower control arm mod (had some red energy suspension bushings) 2) manual steering rack conversion 3) manual side mirror conversion (;) ) 4) FD caliper swap 5) braided brake lines WOW can I say that this lower control arm crap is a pain. if it isnt the stupid ball joints that are stuck with in the hub, its the bolt not going through the hub where the ball joint is. In order to get ready for the track i need to make sure that my car is safe. I need new brake pads (getting hawk pads), new tires, and a lot of hope/faith. Anywho stay tuned :) -Nick |
Tomorrow is a big day. I should be the first FC in the US to run an adaptronic M1200.
Full wire in and running smart coils. Will post pics once I get stuff rolling. |
Little update before tomorrow's big day
So I decided to clean up and paint the garage before tomorrow...:lol:
https://uniim1.shutterfly.com/ng/ser...951062/enhance https://uniim1.shutterfly.com/ng/ser...951079/enhance https://uniim1.shutterfly.com/ng/ser...951065/enhance https://uniim1.shutterfly.com/ng/ser...951070/enhance BUT I can only do so much within a short period of time lol https://uniim1.shutterfly.com/ng/ser...951075/enhance https://uniim1.shutterfly.com/ng/ser...951107/enhance Thanks for tuning in https://uniim1.shutterfly.com/ng/ser...951108/enhance |
Day 1 of installation
https://cimg8.ibsrv.net/gimg/www.rx7...d5cd76512e.jpg
https://cimg0.ibsrv.net/gimg/www.rx7...5a0c22a7f5.jpg https://cimg1.ibsrv.net/gimg/www.rx7...0177e97fd9.jpg https://cimg3.ibsrv.net/gimg/www.rx7...9eefa0db15.jpg https://cimg5.ibsrv.net/gimg/www.rx7...5aa1c8f8ff.jpg https://cimg4.ibsrv.net/gimg/www.rx7...9acf0dbcd9.jpg |
All times are GMT -5. The time now is 05:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands