RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Build Threads (https://www.rx7club.com/build-threads-294/)
-   -   My 87 n/a Work In Progress (https://www.rx7club.com/build-threads-294/my-87-n-work-progress-995048/)

PistonSmash Apr 15, 2012 05:03 PM

My 87 n/a Work In Progress
 
My brother bought the car in, I believe, 2006 for $3300 and this is how he bought it:

http://i1254.photobucket.com/albums/...777_8777_n.jpg

Over the years he replaced several things, such as the seats, the side mirror (which he bought cracked, and then someone else hit him and ripped it off I believe), alternator, coilovers, and rear hatch.

Here is a picture of the original rims the car came with, and how the paint was originally:

http://i1254.photobucket.com/albums/.../th_edit-1.jpg

http://i1254.photobucket.com/albums/...googlemaps.jpg

I don't remember what year it was, but not long after my brother replaced the ugly rims with these:

http://i1254.photobucket.com/albums/...1-26114945.jpg

This is generally how the interior looked during my brother's ownership of it:

http://i1254.photobucket.com/albums/...onePics097.jpg

http://i1254.photobucket.com/albums/...onePics096.jpg

The radio and warning light surrounds where broken when he owned it as well:

http://i1254.photobucket.com/albums/..._Photo0339.jpg

While he owned it, my brother was able to put this nice decal on:

http://i1254.photobucket.com/albums/..._Photo0391.jpg

as well as several other hit and run dents on the body.

PistonSmash Apr 15, 2012 05:05 PM

Then, still forgetting what year it was, the engine the car came with finally died, and my brother bought a used one from one of his friends which we put it ourselves during the Easter season. He bought it for about $600 running, with trans and everything at about 60k miles. Here are some pics in order of the job:

http://i1254.photobucket.com/albums/...1-14111620.jpg

http://i1254.photobucket.com/albums/...14111627-1.jpg

http://i1254.photobucket.com/albums/...1-14113154.jpg

http://i1254.photobucket.com/albums/...1-21125924.jpg

http://i1254.photobucket.com/albums/...1-21125935.jpg

http://i1254.photobucket.com/albums/...1-21125943.jpg

http://i1254.photobucket.com/albums/...1-26120032.jpg

http://i1254.photobucket.com/albums/...1-26120650.jpg

http://i1254.photobucket.com/albums/...1-26120945.jpg

I'd say that job took about a month.

PistonSmash Apr 15, 2012 05:05 PM

Many years later, in August 2011 the stock passenger side muffler broke from rust:

http://i1254.photobucket.com/albums/..._Photo0350.jpg

http://i1254.photobucket.com/albums/...9/th_edit2.jpg

So my brother and I replaced it, leaving the driver side one there, since it was still intact. Fast forward to about February 2012, I finally took possession of the car fully. Shortly after, the driver side muffler also breaks from rust:

http://i1254.photobucket.com/albums/...72767968_n.jpg

So I replace it, which becomes my first expenditure on my car:

http://i1254.photobucket.com/albums/...h_IMG_0286.jpg

From then until now, I've done minor things such as a full brake job, washed the engine, changed the belts and an oil change. Just minor maintenance. I recently mounted the switch my brother installed into the center console for the rear wiper (since the car didn't come with a rear wiper). He left it hanging, which I didn't like. I also sanded and spray painted my front wipers because they were rusted terribly:

http://i1254.photobucket.com/albums/..._Photo0441.jpg

http://i1254.photobucket.com/albums/..._Photo0442.jpg

http://i1254.photobucket.com/albums/..._Photo0461.jpg

Two days ago, I just bought and replaced all the plastic interior surround pieces, finally making it look nice again. The second picture is a hard to see, I'm going to update that soon:

http://i1254.photobucket.com/albums/..._Photo0463.jpg

http://i1254.photobucket.com/albums/..._Photo0464.jpg

As you might see from the second picture, I put the radio where it is supposed to go. My brother had it above where it is now.

Also, my oil pressure gauge is broken on my cluster, I don't know if I plan on fixing that, but it is not a priority:

http://i1254.photobucket.com/albums/...h_IMG_0303.jpg

That's basically it for now. I'm currently desperately seeking the T2 hood and wing, as well as the aero side mirrors. After I get those, I'm bringing the car to my friend's body shop to have the dents, rust etc. fixed and then have it primed for painting. I'll be getting it painted basically the same color, but obviously I highly doubt it will be matched perfectly.

I'll upload some pics of the interior, engine bay, and body as they are now soon. Thanks for reading and taking the time to look. I'm not done yet!

PistonSmash Apr 15, 2012 05:18 PM

My brother also put in the '91 turbo braking system when he put in the coilovers, and we replaced the rear driver side control arm after he snapped it, and my old rim in a pothole late last year.

beefhole Apr 15, 2012 06:06 PM

I have these mirrors if you want. They are primered already!
http://img.photobucket.com/albums/v6...e/P9090002.jpg

PistonSmash Apr 15, 2012 06:32 PM


Originally Posted by beefhole (Post 11056522)
I have these mirrors if you want. They are primered already!
http://img.photobucket.com/albums/v6...e/P9090002.jpg

Those are Aero's right? They work the same as the stock n/a mirrors right?

beefhole Apr 15, 2012 07:02 PM

I do believe they are the S4 aero mirrors, is this the style you were looking for? There are a few types of mirrors on these cars, I am not sure the terminology used for all of them... They are power mirrors, do you have those on you car now?

PistonSmash Apr 15, 2012 07:24 PM


Originally Posted by beefhole (Post 11056569)
I do believe they are the S4 aero mirrors, is this the style you were looking for? There are a few types of mirrors on these cars, I am not sure the terminology used for all of them... They are power mirrors, do you have those on you car now?

I do have the power mirror switch in my center console, but I also have a "manual" mirror hole in the triangle on the interior opposite the mirror. I'm sure they must be power I can't imagine them not.

beefhole Apr 15, 2012 08:12 PM

Are you saying you have the hole there, but not the lever for manual adjustment? Do you already have functioning power mirrors?

You can pop the center console cover off (the entire piece) and you'll see if the switch has wires. Then you can pop the mirror plastic triangle off and see if there is a harness plug in there (careful not to break the plastic piece).

PistonSmash Apr 15, 2012 09:55 PM


Originally Posted by beefhole (Post 11056642)
Are you saying you have the hole there, but not the lever for manual adjustment? Do you already have functioning power mirrors?

You can pop the center console cover off (the entire piece) and you'll see if the switch has wires. Then you can pop the mirror plastic triangle off and see if there is a harness plug in there (careful not to break the plastic piece).

I do have power windows. I just checked

PistonSmash Apr 16, 2012 11:23 PM

I just picked up a T2 wing and a power mirror switch from a craigslist seller for $70 plus the $22 I spent on gas. Am I completely happy with what I paid? Mmmmm, no not really, but its done. The switch is to replace the one my mother broke by leaning on it and crushing it. I tried using it however, and my mirrors still wont move, so i believe I have problems past the switch. Here is the wing, which has a few problems, but nothing major.

http://i1254.photobucket.com/albums/...h_IMG_0310.jpg

http://i1254.photobucket.com/albums/...h_IMG_0311.jpg
I think it may be special? Never seen one with "mazda" printed on it.

http://i1254.photobucket.com/albums/...h_IMG_0312.jpg
Missing a bolt

http://i1254.photobucket.com/albums/...h_IMG_0313.jpg
Missing a bolt

http://i1254.photobucket.com/albums/...h_IMG_0314.jpg
Small crack. Think this can be fixed?

The wing will go on the car along with the T2 hood and aero mirrors once I get them and be painted along with the car.

PistonSmash Apr 19, 2012 07:42 PM

Here are all the dents, dings, rust, scratches and issues with my car (all dents are from hit and runs):

Paint issues:

http://i1254.photobucket.com/albums/...h_IMG_0111.jpg

http://i1254.photobucket.com/albums/...h_IMG_0108.jpg

http://i1254.photobucket.com/albums/...h_IMG_0110.jpg

Scratches/Dents/Rust/Cracks:

http://i1254.photobucket.com/albums/...h_IMG_0107.jpg

http://i1254.photobucket.com/albums/...h_IMG_0106.jpg

http://i1254.photobucket.com/albums/...h_IMG_0105.jpg

http://i1254.photobucket.com/albums/...h_IMG_0104.jpg

http://i1254.photobucket.com/albums/...h_IMG_0101.jpg

http://i1254.photobucket.com/albums/...h_IMG_0112.jpg

http://i1254.photobucket.com/albums/...h_IMG_0102.jpg

Missing side strip:

http://i1254.photobucket.com/albums/...h_IMG_0109.jpg

PistonSmash Apr 19, 2012 07:43 PM

Pic of my Racing Beat mufflers:

http://i1254.photobucket.com/albums/...h_IMG_0103.jpg

Better pic of my wiper arms that I painted. They look practically brand new:

http://i1254.photobucket.com/albums/...h_IMG_0113.jpg

PistonSmash Apr 30, 2012 08:05 PM

Here's an update:

Bought the wrong aero mirrors for $60 by mistake, selling those [https://www.rx7club.com/showthread.php?t=996362].

Bought a cigarette lighter receptacle to replace my "broken" one, ended up frying a 10 amp fuse, and two 15 amp fuses only to find out my old receptacle works with a 30 amp fuse. Cracked it up to being an old car not compatible with modern technology.

Bought a new-used TPS to replace my "not-working" one, according to my brother, only to put it in and find out my original one works BETTER. I don't know what that is about, not really worried about that right now.

TPS and receptacle cost me $50, for no good reason so far, only to have an extra set.

Bought a gas cap to replace the one my mother apparently lost when she drove my car for about 3 months before I did. Waste of money for no reason.

Broke the passenger side triangle air vent cover accidentally.
------------------------------------------
Good news:
S5 rear bumper on the way.
Cigarette lighter is finally working.
Going to pick up a T2 hood soon.

So all in all, the good is outweighing the bad right now. Still optimistic. Will update with pictures of my interior as it is now soon, and will update with pictures of the items I'm getting soon when I do. Cheers

PistonSmash May 2, 2012 09:10 PM

Got my S5 bumper today. One more thing off the list:

http://i1254.photobucket.com/albums/...h_IMG_0442.jpg

I keep forgetting to take pics of the interior though.

PistonSmash May 6, 2012 07:02 PM

Took an 4 hour trip down to Maryland yesterday to pick up this baby for $200:

http://i1254.photobucket.com/albums/...h_IMG_0459.jpg

Well worth it.

The car has since gone from this:

http://i1254.photobucket.com/albums/...h_IMG_0461.jpg

to this:

http://i1254.photobucket.com/albums/..._IMG_04622.jpg

http://i1254.photobucket.com/albums/...h_IMG_0463.jpg

--------------------------------------

Besides that, the car has been having some strange acceleration/idle/throttle/clutch problem. Yea, I narrowed it down to that... It's quite difficult to explain, so I won't try to. I'm taking things one step at a time now with it.

AGreen May 6, 2012 08:30 PM

While I'm glad you got a nicer hood, I'm not a fan of seeing a TII hood on a NA car. Just my preference, but I must say nice things :) It is in better shape :icon_tup:

Try these things to fix your idle/throttle/acceleration/clutch issues, pretty much in this order:

Check for vacuum leaks by spraying with carburetor cleaner around the intake manifold. If the idle changes tune, you have located a vacuum leak. Fix any of these first.

Warm the engine to normal operating temperature. If the idle is surging, get a multimeter and tap in to the TPS wires, one on the green/yellow and the other on a good ground. You can just shove the lead in the back of the connector. There's a screw with a spring on it that you need to adjust until it reads 1.00 volts. Rev the engine a few times, recheck the voltage at 1.00 volts. Repeat until there is no change in voltage between revs.

Get a timing light. Jumper the initial set coupler, and re-adjust the idle speed to 750 rpm. Verify the timing is set properly.

Those simple things take care of 90% of all Rx7 idle/acceleration/throttle issues.

Edit:
Also, check your compression. You should always have a good idea of how "healthy" the engine is. I do this around every 10k miles.
http://www.banzai-racing.com/compression_test.htm

PistonSmash May 6, 2012 08:51 PM


Originally Posted by AGreen (Post 11081529)
While I'm glad you got a nicer hood, I'm not a fan of seeing a TII hood on a NA car. Just my preference, but I must say nice things :) It is in better shape :icon_tup:

Try these things to fix your idle/throttle/acceleration/clutch issues, pretty much in this order:

Check for vacuum leaks by spraying with carburetor cleaner around the intake manifold. If the idle changes tune, you have located a vacuum leak. Fix any of these first.

Warm the engine to normal operating temperature. If the idle is surging, get a multimeter and tap in to the TPS wires, one on the green/yellow and the other on a good ground. You can just shove the lead in the back of the connector. There's a screw with a spring on it that you need to adjust until it reads 1.00 volts. Rev the engine a few times, recheck the voltage at 1.00 volts. Repeat until there is no change in voltage between revs.

Get a timing light. Jumper the initial set coupler, and re-adjust the idle speed to 750 rpm. Verify the timing is set properly.

Those simple things take care of 90% of all Rx7 idle/acceleration/throttle issues.

Edit:
Also, check your compression. You should always have a good idea of how "healthy" the engine is. I do this around every 10k miles.
http://www.banzai-racing.com/compression_test.htm

Yea I get that a lot, but I'm not going to keep it NA. Right now I'm focusing on the body and paint. There would be no point in getting the hood down the road when I get the engine, and then have to waste more money painting it the color of my car, when I can just skip that entirely and do it now.

PistonSmash May 6, 2012 09:00 PM


Originally Posted by AGreen (Post 11081529)
While I'm glad you got a nicer hood, I'm not a fan of seeing a TII hood on a NA car. Just my preference, but I must say nice things :) It is in better shape :icon_tup:

Try these things to fix your idle/throttle/acceleration/clutch issues, pretty much in this order:

Check for vacuum leaks by spraying with carburetor cleaner around the intake manifold. If the idle changes tune, you have located a vacuum leak. Fix any of these first.

Warm the engine to normal operating temperature. If the idle is surging, get a multimeter and tap in to the TPS wires, one on the green/yellow and the other on a good ground. You can just shove the lead in the back of the connector. There's a screw with a spring on it that you need to adjust until it reads 1.00 volts. Rev the engine a few times, recheck the voltage at 1.00 volts. Repeat until there is no change in voltage between revs.

Get a timing light. Jumper the initial set coupler, and re-adjust the idle speed to 750 rpm. Verify the timing is set properly.

Those simple things take care of 90% of all Rx7 idle/acceleration/throttle issues.

Edit:
Also, check your compression. You should always have a good idea of how "healthy" the engine is. I do this around every 10k miles.
http://www.banzai-racing.com/compression_test.htm

If this doesn't read 1.00 volts, what will change?

AGreen May 6, 2012 09:39 PM

The idle will surge really, low range throttle operation will be off, etc.

PistonSmash May 10, 2012 08:05 PM

Interior shots:

http://i1254.photobucket.com/albums/...h_IMG_0472.jpg

http://i1254.photobucket.com/albums/...h_IMG_0478.jpg

http://i1254.photobucket.com/albums/...h_IMG_0473.jpg

http://i1254.photobucket.com/albums/...h_IMG_0475.jpg

http://i1254.photobucket.com/albums/...h_IMG_0474.jpg

http://i1254.photobucket.com/albums/...h_IMG_0476.jpg

http://i1254.photobucket.com/albums/...h_IMG_0477.jpg

PistonSmash May 10, 2012 08:06 PM

Some candids with my new hood:

http://i1254.photobucket.com/albums/...h_IMG_0471.jpg

http://i1254.photobucket.com/albums/...h_IMG_0468.jpg

http://i1254.photobucket.com/albums/...h_IMG_0469.jpg

http://i1254.photobucket.com/albums/...h_IMG_0470.jpg

AGreen May 10, 2012 08:45 PM

Does the oil pressure gauge not read, or is the actual meter broken? You should really get that fixed, I saved my engine from total toasting with that gauge.

PistonSmash May 10, 2012 09:50 PM


Originally Posted by AGreen (Post 11086580)
Does the oil pressure gauge not read, or is the actual meter broken? You should really get that fixed, I saved my engine from total toasting with that gauge.

The meter is broken, and I'm not really worried about it. I'm not keeping the engine for long, so if it blows, its all the more reason to get a new one.

AGreen May 10, 2012 09:53 PM

Better to fix it before replacing the engine. That way when you start your new one up and don't have a reliable indication of oil pressure, you won't melt down all that blood/sweat/tears/money ;)


All times are GMT -5. The time now is 06:19 AM.


© 2026 MH Sub I, LLC dba Internet Brands