RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Build Threads (https://www.rx7club.com/build-threads-294/)
-   -   FC3S 1986 N/A From finland (https://www.rx7club.com/build-threads-294/fc3s-1986-n-finland-1098142/)

macce76 03-28-16 05:22 AM

FC3S 1986 N/A From finland
 
11 Attachment(s)
Hi.

Wondered i`d write about my fc a little. It`s an import from Germany to Finland,
PO had allready done an overhaul for the engine. So far it works.
Swapped my El Camino on it last fall, managed to have a little fun with it before winter came.

Few pics from fall, the way we were.

Attachment 614005

For starters, i had to replace original exhaust, `cos it was held on mainly by rust..

Attachment 614006

Made my own design, pretty straight through 2,5" pipe. Surprisingly its also pretty quiet when you travel. But he** breaks loose when you give it some gas. So it`s attentiongetter in town.

Attachment 614007
Attachment 614008


It had some aftermarket 16" under, didn`t like those. So i loaned SSR wheels from a friend, i actually sold these same wheels to him.. Gutted..
Same time when changing wheels, decided to cut original springs, since i knew winter would bring me some coilovers.

Appearance vice, we were gettin better for my eye. :icon_tup:

Attachment 614009
Attachment 614010
Attachment 614011

So rest of fall went like this, and on november, the rx went for hibernation.

Attachment 614012
Attachment 614013

Ebay provided coilovers, steeringwheel, and most importantly, new clutch ,`cos old ones bearing was grinding like hell.
Also bought some new wheels for the baby, needs some fixing thought
ACT 8,5*16 ET 28

Attachment 614014
Attachment 614015


Next episode, Brakejob..

macce76 03-28-16 05:28 AM

11 Attachment(s)
I`ll continue ..

Little brake job, old ones were totaled, front end was stuck, 3 of 4 pistons.. per side i mean.
Rear wasn`t better at all..

Attachment 613994

Front discs, you almost could say they were stuck to the hub.. :lol:
Rears come off clean thought

Attachment 613995
Attachment 613996

Little bath time, so rust and stuck parts would loosen a bit.

Attachment 613997

Pistons off, and ready to refurb.

Attachment 613998
Attachment 613999

First front caliber, and rear calibers.

Attachment 614000
Attachment 614001

Painted, new gasgets and rubberboots, slowly coming together something you can just put back in car.

Attachment 614002
Attachment 614003
Attachment 614004

Well, that`s a start, i`ll write some more soon.

Thank you.

13.bREW 03-28-16 12:29 PM

Looks Great very clean S4 and the SSRs are legit. Im a fan of the NA builds.

macce76 04-12-16 02:50 PM

10 Attachment(s)
Thanks REW.
Sadly those ssr`s were loaned by that time.

So let`continue.

Weekend was pretty efficient, managed to drop the old suspension and assembled new one in for a trial fit.

Attachment 613210
Attachment 613211

Have to do some cleaning..

Attachment 613212

Rear brakes ready, It`s so nice when you can install some clean parts.
Also rear shocks on a trial fit..
Attachment 613213

Front end so i can determine the ride height.
Attachment 613214
Attachment 613215
Like that..
Attachment 613216
And more fitting, rear is way too high. have to do something with that..
Attachment 613217
Attachment 613218
Attachment 613219

Next on agenda is some rimfixing, so i can mount the tyres and check how the height really is.
Lot has changed after this, i have to write next update fast..

unek87 04-12-16 07:50 PM

Love the wheels brotha

psyaddict 04-13-16 01:27 AM

looking good

kuuva86 04-18-16 04:59 AM

Moro ! Mukava nähdä muidenkin suomalaisten seiska harrastajien tänne kirjoittelevan :)
Olenkin ko. auton seikkailuja seurannut usean vuoden ajan(nettiautosta). Turkuunko tämä FC on nyt eksynyt ? Itse olen FC:n omistanut jo vuodesta 2007 lähtien ja nyt on iso remppa päällä. Siitä lisää kirjoittamassani blogissa.

Käy tutustuun kirjoittamaani blogiin ja liity perustamaani yhteisöön :)
RX7Club.com - Finnish RX-7 owners
Project Genesis

macce76 04-19-16 01:23 PM

6 Attachment(s)
Thanks guys.
And Kuuva, luin eilen blogis, on sulla ollu tavan paljon koettelemuksia.
Tän laitoksen historia kiinnostaa, onko sulla millasta infoa liikkeistä?

And again, some progres, This time wheel refurbishing.

Picture doesn`t really tell the truth abouth what condition these were. Curbing and pink overspray etc..
Here`s a picture, after quick wash and mild paintstripping.
Attachment 613048

So, paintstripping didn`t go as planned. Time to start sanding. First 120
Attachment 613049

Little comparing.
Attachment 613050

All four sanded. Yay.
Attachment 613051

Forgot to took pictures from different stages, but i gues you all know the drill.
320-600-800-1000-1500 and finally polish the lips.

Attachment 613052

Home stretch..

Attachment 613053

macce76 04-19-16 01:32 PM

4 Attachment(s)
Second post for wheels

Masking so we can start painting.

Attachment 613039

Basecoat, For a while wondered leaving them to white. Glad i didn`t.

Attachment 613041

On to the colour.

Attachment 613043

trialfit with wheels. Rear is soooo high. Have to do something about it.

Attachment 613045

Well, pictures suck. Taken with phone so quality isn`t best.
Next on to do list is the height of rear...

Thanks.

unek87 04-19-16 01:39 PM

O so pretty .

macce76 04-23-16 03:29 AM

3 Attachment(s)
Thanks.

Brakes been bled, been fidling with rear height, too high still but..

Dropped the seven to ground and just looked at it.
Hell, i love it.

Attachment 612914

Tyre/Wheel combo sits pretty good to my liking.

Attachment 612915

Small details still to do. changing the steerinwheel, etc
Painted the doorhandless to black, suits better for my eye.

Attachment 612916

Next, road inspection...

psyaddict 04-25-16 01:31 AM

do you happen to know if this car is in finland? Mazda RX-7 Fc 1.3 Wankel 110kW - auto24.ee

macce76 04-25-16 02:32 AM

No, i don`t know if that`s in finland.
Pretty decent looking.

psyaddict 04-25-16 06:59 AM

yeah, very good looking for that price, i heard it was sold to finland. It's the only fc3s iv'e seen on street.

macce76 04-25-16 04:22 PM

6 Attachment(s)
Oh, do you know when the deal`s been done?

So. Seven passed inspection.

Attachment 612799

Did 4 wheel alignment at work, and tried some coil adjustments.
Just a tad stiffer for back, and a little softer on front and it will be ok.

Attachment 612800

First run was 400 km to a car meet in finland, and just to check that everything works like should.

Attachment 612801

That feeling after winter, when you get to drive. O my.

Attachment 612802
Attachment 612803

Oops..

Attachment 612804

So now i`m gonna pretty much just drive, and hope everything stays ok until the summer really starts.

Oh yeah, need to change clutch, pressure bearing makes noise. But that is a no brainer. Hope so.

Thanks

clokker 04-25-16 07:46 PM

Photobucket is being weird, I can't see any pics at all.

macce76 04-26-16 02:05 PM

Hmm, weird. Everything shows just fine for me??

Baloo88 04-29-16 12:54 PM

Oh, another FC in turku:icon_tup: Was it the same one sitting in Motonet workshop last year?

macce76 05-01-16 02:51 AM

Yes it`s the same. And still sitting occasionally. I work at there.
You have one FC in turku too??

Maybe a meet someday? :)

Baloo88 05-02-16 03:40 AM

Yeah, I have a red S5 TII:)
A meeting would be nice but the car is in pieces in my garage, hoping to get it running before june

SJK300 07-07-16 03:00 AM

Looking good, I really need to go through my brakes as well. And I need to change the rear dif...
Any updates or plans for the future?

macce76 07-12-16 02:22 PM

Thanks.

Minor upgrades, gearbox needs rebuild. Rear diff also.

Baloo88. Was it you today at motonet?

ACR_RX-7 07-12-16 03:05 PM

I know I'm late to the party, but I just noticed that second pipe that runs along side.

What does that go to?

I have never seen that before.

Originally Posted by macce76 (Post 12044452)

For starters, i had to replace original exhaust, `cos it was held on mainly by rust..

http://i256.photobucket.com/albums/h...7/CAM00012.jpg




macce76 07-12-16 03:38 PM

Now, that is an exellent question. i don`t have a clue.there is a connection at the down pipe for it, and from there it went straight to back like that. I was afraid to remove it. So i connected it to exhaust pipe. It even had/has a silencer.. So if anyone knows, feel free to shine some light about this. :D

ACR_RX-7 07-12-16 03:41 PM

I have spent the better part of 20 minutes searching online through google images. No such luck yet. I wanted to at least spend some time looking before I asked.


All times are GMT -5. The time now is 07:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands