1989 Turbo II Build
8 Attachment(s)
Well i finally did it after so many years of talking about it. its a 1989 turbo ii that i found in ottawa. car has 150k on it, the car runs fine, but the clutch is chattering and theres a thumping noise from the rear end when i accelerate or let go of the gas at a high speed. i think its the front diff mount, but im not too sure. anyways, ill just let the pictures do the talking.
Attachment 697902 Attachment 697903 Attachment 697904 Attachment 697905 Attachment 697906 Attachment 697907 Attachment 697908 Attachment 697909 |
pretty clean....what your plans for it?
|
5 Attachment(s)
anyways, new update! just installed a new 350mm momo montecarlo steering wheel, and boost controller. got it free from my bro since hes now building his car with an aem ems2, so i get to get his turbo goodies! so heres the pics.
Attachment 695270 Attachment 695271 Attachment 695272 Attachment 695273 Attachment 695274 |
Is your steering wheel removable too?? Nice build so far.
|
8 Attachment(s)
New updates! got some cheap fake bride low maxes with rails and brackets. problem was making a base for the rails. NO PROBLEM! TO HOMEDEPOT!!!! so i got some 3/8 x 1'' steel bars and made myself a base. didnt take enough pictures tho... but ill get to that one day if i ever make a write up. Im relatively average guy, 5'10 ish, size 33 waist. the chair fit me pretty good, and with proper adjustments, my height position is really good. also i chose a skinnier padding for the bottom on my chair so i sit a bit lower too. o yeah and my wheel isnt detachable, im looking for a quick release but it'll do for now...
Attachment 694174 Attachment 694175 Attachment 694176 Attachment 694177 Attachment 694178 Attachment 694179 Attachment 694180 Attachment 694181 |
eBay? Are those fia certified lol?
|
nope, local guy that sells car parts. its def not fia certified but my brother uses them on the track and they can take a beating. im not doing any time attack anytime soon and i hated my stock seats, so i thought i would get some fake brides.
|
Beautiful!
|
Nice build
|
I'm jelly, your FC is beautiful
|
if this is the same car i think it is it soo damn clean. congrats on the buy. Did you buy it off an older lady here in ottawa?
|
Long story... lol so this car was up for sale in march i think. And when i first saw it, i thought that its a little too far for me to travel just to see the car. So a couple of weeks later the cars ad is off kijiji so i thought to myself that im an idiot for not going. Butttt last month it came back up for sale again in ottawa. Apparently the person who bought it was a friend of the ladies and he got it for a deal. Problem was that he had no room for the car. So immediately i went for it. My friend keeps telling me how its fate that me and this car belongs together =p
|
you have pm
|
Want to sell the stock steering wheel?
|
im planning to keep all my parts, sorry guys =(
|
well you found a sweet car. i was so tempted to buy it even though i have no room, somewhere i would have found room for it haha. congrats
|
Nice looking car! Very jealous
|
thanks =) hopefully ill have some more money soon and do some more stuff!!
|
Nice build so far! Love the seats
|
Interior looks good.
|
More updates? Rare to see a black S5 TII...
|
soooooon!!! got some new brakes, got a new horn button =P. its sleeping for the winter right now so i gotta collect some parts!
|
Awesome! Once you have stashed a good amount of parts, take pics!
|
9 Attachment(s)
Its been awhile and ive been kinda slacking off lately, so i decided to do this!
Attachment 685793 Originaly my evc couldnt fit into my ashtray properly, the thing was just too damn big. It just kinda left it sitting on the outside of it but it kept tipping over everytime i floored it. Attachment 685794 Attachment 685795 So i decided to do something about it... At first i thought this was gonna be an easy job, maybe 20 minutes tops, but damn was i wrong. This ashtray is wayyy tooo small for the evc. It took me like 2 hours to get it to actually fit in. I dremeled all the ridges inside the ashtray and cut a hole on the top to drop it in. Attachment 685796 http://i7.photobucket.com/albums/y28...ps694c052a.jpg Attachment 685797 It took alot of adjustments to get the door to close on this thing but eventually i got it. The bad part was i slipped and caught a bit of the open tab and scratched it :wallbash: (If anyone wants to donate one to me, that would be totally awesome! LOL) Attachment 685798 Attachment 685799 Attachment 685800 Attachment 685801 Anyways, so yeah it stays in there real tight and looks alright. I think i might paint the insides since the colouring kinda went away, but for now i just put some electrical tape on the outside to kinda hide it abit. Its hard to notice it unless you actually shine a light inside the ashtray. |
9 Attachment(s)
Installed new brakes, lines, front diff mount, pinion stubber!
Awesome new parts Attachment 664850 Stops like a champ! Attachment 664851 Attachment 664852 Attachment 664853 Make sure to take out the camber link! Attachment 664854 This is reallyyy heavy, i dont think ive ever held such a heavy exhaust before... Attachment 664855 Make sure to support the diff/subframe Attachment 664856 It looked like it had cracked a bit and was sagging Attachment 664857 Brand new one! Attachment 664858 No pictures of the pinion stubber =( but all you can see is just a nut where the compartment boxes are. |
7 Attachment(s)
New parts! Clutch, flywheel, engine mounts, tranny mounts, flywheel stopper, etc WOOOO PAGE 2!
Attachment 664843 Attachment 664844 Attachment 664845 Attachment 664846 Attachment 664847 Attachment 664848 Attachment 664849 |
good idea with the change cup thing, i might just follow your example
|
Thanks, but make sure u use tape when youre cutting it up lol.
|
12 Attachment(s)
Just adding some pictures for my for sale ad =)
Attachment 751258 Attachment 751259 Attachment 751260 Attachment 751261 Attachment 751262 Attachment 751263 Attachment 751264 Attachment 751265 Attachment 751266 Attachment 751267 Attachment 751268 Attachment 751269 |
8 Attachment(s)
|
That is such a clean car! Are those seats back killers?? That first gen is amazing as well. That turbo set up is neat!
|
To each their own but, fake seats? IDK, turbo 2's deserve quality parts and such, maybe for half the price of the funds spent on those fortune auto coils overs, could've found a good used BRIDE?
Just a hater of fake replica parts. But again, to each their own, nice FC btw. |
What wheel sizes were you running on this car?
|
Originally Posted by fc pro am
(Post 12234153)
To each their own but, fake seats? IDK, turbo 2's deserve quality parts and such, maybe for half the price of the funds spent on those fortune auto coils overs, could've found a good used BRIDE?
Just a hater of fake replica parts. But again, to each their own, nice FC btw.
Originally Posted by Funkerberg
(Post 12234440)
What wheel sizes were you running on this car?
|
Very clean car to start off with. Best of luck with it!
|
All times are GMT -5. The time now is 07:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands