RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Build Threads (https://www.rx7club.com/build-threads-293/)
-   -   The start of Building a FB. (https://www.rx7club.com/build-threads-293/start-building-fb-1141258/)

Fast Dez Jan 11, 2020 05:21 PM

The start of Building a FB.
 
Hello everyone,
I'm building a 81 with a T2 motor. Hope to make 500whp, Air Ride set up, the GTU Wide body kit. Ultimate goal is to have a semi race feeling street car that can trip on the track while being unique. I will be continuing to update this thread with my progress and questions. So your experience and knowledge is appreciated. I have already stripped the interior and see image below for the exterior. Here are a few things I'm dealing with right now.

I have a rebuilt Stock 81 Transmission and I am curious to know if that will bolt on with no issue with a T2 Clutch (https://www.summitracing.com/parts/s...zda/model/rx-7).
Another thing I'm looking into is how the drive-train is going to workout. Shooting for 500whp and I'm Sure the factory rear end wont hold that. Any help is appreciated.
Anyone have a radiator recommendation? I will be doing custom brackets for the inter-cooler, might as well do the same with the radiator.

PFA (Door cards are off and ceiling is stripped as of now)
https://cimg8.ibsrv.net/gimg/www.rx7...13ffdfff03.jpg


https://cimg6.ibsrv.net/gimg/www.rx7...4d01e6b7de.jpg

rxtasy3 Jan 11, 2020 05:35 PM

welcome. did u not see the "build threads" sub section in this section where this should have been posted? there's a place for everything. makes it easier to find things without having stuff posted all over the forum. maybe a mod with the ability can move this to the appropriate section.

Fast Dez Jan 11, 2020 06:23 PM


Originally Posted by rxtasy3 (Post 12389276)
welcome. did u not see the "build threads" sub section in this section where this should have been posted? there's a place for everything. makes it easier to find things without having stuff posted all over the forum. maybe a mod with the ability can move this to the appropriate section.

I did not see that, thanks.

WJM ROTARIES Jan 12, 2020 09:33 AM

Welcome to forum

Jon_Valjean Jan 12, 2020 02:11 PM


Originally Posted by Fast Dez (Post 12389275)
I have a rebuilt Stock 81 Transmission and I am curious to know if that will bolt on with no issue with a T2 Clutch (https://www.summitracing.com/parts/s...zda/model/rx-7).

Yes, but anything north of 200-250HP and you'll shred it pretty quick. You need to find a FC turbo box at the very minimum, or go with something even stronger than that.


Another thing I'm looking into is how the drive-train is going to workout. Shooting for 500whp and I'm Sure the factory rear end wont hold that. Any help is appreciated.
Most people will tell you to get a Ford 8.8" or Toyota Hilux diff.


Anyone have a radiator recommendation? I will be doing custom brackets for the inter-cooler, might as well do the same with the radiator.
Anything thick and dual-pass with the inlet/outlet on the right side, and that will fit under the hood is all good. Doesn't have to be a name brand. Get a Spal or Davis Craig electric thermo fan too.



kutukutu1 Jan 14, 2020 02:31 PM

Welcome. Like already mentioned the trans won't hold nor will the diff. At minimum a T2 setup or adapt a t56 and get a beefier rear end. If it's a road race car you can probably get away with T2 components and 500 since the driveline shock in those conditions is not as aggressive as drag or drifting. Good luck and keep motivated. Been working on mine for 11 years so far, but I am seeing the light at the end now.

mazdaverx713b Jan 20, 2020 05:48 AM

I moved this into the builds section. Keep us updated on your progress!

Richard Miller Jan 22, 2020 11:02 PM

Air Ride? Like the UHaul trucks?


All times are GMT -5. The time now is 06:46 AM.


© 2026 MH Sub I, LLC dba Internet Brands