|
SCCA AutoX F Prepared Project
So I've been trolling here for about the last 3 years whilst building my car, and since it's finally on the road I decided to post! I bought the car in summer of 2009 at which time I co-owned it with my friend Bob. We worked all winter (2009/2010) stripping the car down, doing bodywork, and preparing for paint. This spring, Bob decided to make his daily, '99 Audi A4 1.8T his dedicated racecar and picked up a new daily beater. Thus, the Rx7 is all mine now. :D This past winter (2010/2011) I took the engine out, inspected it, and replaced what was needed. Surprisingly, the seals are all in great shape, but carbon buildup was an issue. Seafoam brought the tired engine back to life. This season the car has done exactly what I wanted, proving itself reliably on the road. This winter, the car will go through some big changes to transform it into an autocross go-kart of sorts.
Done so far: Engine refresh (seafoam soak) Rebuilt nikki 4bbl Carb OEM Water Pump Mishimoto radiator Electric 2 Stage Fan (out of an old Ford Taurus 3.8L) Carter High Flow Fuel Pump (deadhead setup) Holley Fuel Pressure Regulator w/ gauge (underhood) Oil Metering Pump delete (running premix) AC/air pump delete Sunpro center console gauge cluster Pushbutton Start Ignition Relocated battery 16 gal JAZ fuel cell Performance mods to come: Sterling Nikki Carb Racing Beat springs Tokico HP Blue Struts Energy Suspension bushings Racing Beat Header/resonator Custom welded SS 2.5" exhaust Challenger Diamond Racing Wheels 15x8 Gloss black with red time attack ring 6 Point Cage Manual steering rack upgrade Day of purchase: Purchased from some emo dsm ricer in hamilton that didn't know what a carburetor was. Price: $500 http://www.flickr.com/photos/68158819@N08/6396794401/http://www.flickr.com/photos/68158819@N08/6396794401/ by http://www.flickr.com/people/68158819@N08/, on Flickr Immediate gutting that night: http://www.flickr.com/photos/68158819@N08/6396792699/http://www.flickr.com/photos/68158819@N08/6396792699/ by http://www.flickr.com/people/68158819@N08/, on Flickr Filthy engine as received: http://www.flickr.com/photos/68158819@N08/6396792413/http://www.flickr.com/photos/68158819@N08/6396792413/ by http://www.flickr.com/people/68158819@N08/, on Flickr Be gone old radiator! Replaced with a Mishimoto and electric fan setup. http://www.flickr.com/photos/68158819@N08/6396793751/http://www.flickr.com/photos/68158819@N08/6396793751/ by http://www.flickr.com/people/68158819@N08/, on Flickr Pulling the motor & trans, must've only weighed 250lbs http://www.flickr.com/photos/68158819@N08/6396794097/http://www.flickr.com/photos/68158819@N08/6396794097/ by http://www.flickr.com/people/68158819@N08/, on Flickr Rolled her into the spray booth for the first coat of sanding primer http://www.flickr.com/photos/68158819@N08/6396933569/http://www.flickr.com/photos/68158819@N08/6396933569/ by http://www.flickr.com/people/68158819@N08/, on Flickr Primer/blocking http://www.flickr.com/photos/68158819@N08/6396932433/http://www.flickr.com/photos/68158819@N08/6396932433/ by http://www.flickr.com/people/68158819@N08/, on Flickr Ready to spray some color! Feeling kinda like Dexter here... http://www.flickr.com/photos/68158819@N08/6396921629/http://www.flickr.com/photos/68158819@N08/6396921629/ by http://www.flickr.com/people/68158819@N08/, on Flickr We were going for a flat blue like the color of Dickies work pants, not too far off! First coat, went on a little dry. http://www.flickr.com/photos/68158819@N08/6396924289/http://www.flickr.com/photos/68158819@N08/6396924289/ by http://www.flickr.com/people/68158819@N08/, on Flickr Second coat: http://www.flickr.com/photos/68158819@N08/6396923905/http://www.flickr.com/photos/68158819@N08/6396923905/ by http://www.flickr.com/people/68158819@N08/, on Flickr |
|
Nice progress so far. I really like your color choice.
|
Thanks! It's too bad I executed it poorly... Half of the car came out with major orange peel. But who cares! It's a race car in the making.
|
love the color man might have to borrow it lol
|
i like it! my friend runs FP, with a 13B bridgeport and modded nikki, the car's pretty mean, err awesome
|
So lately I've been struggling with cold starts, and premix smoke at startup. Sometimes it fires right up, and sometimes it sounds like its firing on one rotor until it starts running smooth... For some background, I've done glazedham's carb strip and I'm running manual choke to the fast idle arm/choke linkage. No vacuum leaks, bowls look fine before starting, and it is indeed running on the idle circuit. I'm cornfused.
|
Considering putting up for sale since I'm moving and going back to school :(
|
| All times are GMT -5. The time now is 09:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands