Project "Smurfette"
NO I did not choose that name..... That name was given to my car by my eldest daughter, who has also claimed the car once she gets her drivers license.
So I have had my car for a little over seven years, I have had many ups and downs with my build over the years. One very important thing I have learned over the years is "you get what you pay for!" So after going the cheap way, I have decided I will spend the money to get the job done right this final time. My car has spent too many days in my garage than on the road. So the first thing I got done last year was a paint job. (I also went the cheap way the first time around.) Car being sanded down http://i487.photobucket.com/albums/r...D1416-orig.jpg In high build primer http://i487.photobucket.com/albums/r...06B13-orig.jpg Blocked by hand by an old school body guy. http://i487.photobucket.com/albums/r...76C9D-orig.jpg Here its getting its base coat http://i487.photobucket.com/albums/r...61E38-orig.jpg http://i487.photobucket.com/albums/r...E41FD-orig.jpg First coat of WRX STI world rally blue http://i487.photobucket.com/albums/r...70721-orig.jpg Straight out of the booth after clear coat http://i487.photobucket.com/albums/r...5EE21-orig.jpg http://i487.photobucket.com/albums/r...F9FB8-orig.jpg After wet sanding to take out any blemishes and runs http://i487.photobucket.com/albums/r...608BE-orig.jpg And here is how she stands today. In her daily shoes http://i487.photobucket.com/albums/r...0DC1B-orig.jpg In her track shoes http://i487.photobucket.com/albums/r...4B72E-orig.jpg |
very beautiful car. What kind of wheels are her "daily shoes"?
|
Thanks man.The wheels are Watanabe RS8s. I bought them last year and had them sandblasted and powder coated.
|
very nice!
|
Here is a pic of when I bought the rims-
http://i487.photobucket.com/albums/r...e/IMG_0014.jpg |
Beautiful car! I love rs8s!
|
So here is my plan over tge winter. My last engine lost compression i on the last dyno session. I previously made 420 & 14psi in 2010 and went back in spring 2011 to turn up the boost when I lost compression on the rear housing. I took the back plate off to find that all my apex seal spring went flat. So the engine was still ok, but I was fed up of engine problems. So I went with an S6 engine this time around.
So far I have acquired ENGINE- A freshly rebuilt Street ported S6 engine Cosmo re UIM & LIM (engine was port matched) 20B throttle body Rotary works TB elbow ACT lightened flywheel ACT Clutch and pressure plate ENGINE MANAGMENT Platinum sport 1000 Full function engineering trigger kit FUEL Brand new OEM gas tank Custom surge tank Bosch 044 fuel pump Injector dynamics 2000cc secondary injectors Injector dynamics 1000cc primary injectors Aeromotive FPR FORCED INDUCTION SETUP Borg Warner S366 Custom exhaust manifold Dual tial wastegates Tial BOV FMIC Custom 3" DP/ exhaust SUSPENSION Re speed Coilover kit Re speed Camber plates Full poly bushing upgrade front to back. That's all I can think of now I will update with pics as I go along. Thanks for the compliments! |
nice!!!
|
Love the color in the light.
|
Looks great, I'm hoping mine will come out simmular! Any chance of some hi-res pics??
|
Thanks again for the compliments on the color.
Adsy01- once I complete the engine bay and spring comes around, I have a friend who is gonna do a photo shoot for me. |
I wouldnt give the car to my daughter if it had that engine setup... lol
|
Ok, so I brought my car out of storage and back home to start work.
Since my last post, I have contacted "Gato performance" and they will be building me a custom exhaust manifold with dual wastegate mounting points.:) He told me with morning the manifold should be done by Friday and shipped out. Lots of pics of progress are on the way. |
so here is my dirty engine bay
http://i487.photobucket.com/albums/r...t/AE0D2F56.jpg my plan here is to clean up the engine bay, and have it repainted satin black. Here is the engine bay after round one of degreasing, scrubbing, scrubbing and more scrubbing. http://i487.photobucket.com/albums/r...t/5892BC88.jpg I cant believe how much crap i have gotten off and I am not even done yet. |
i have also done over my pressure plate, flywheel and clutch.
before: http://i487.photobucket.com/albums/r...t/AEA31BB3.jpg http://i487.photobucket.com/albums/r...t/0D255F46.jpg http://i487.photobucket.com/albums/r...t/A5D3E3D4.jpg |
After
I had the clutch completely rebuilt http://i487.photobucket.com/albums/r...t/BD0DD614.jpg I got the flywheel resurfaced http://i487.photobucket.com/albums/r...t/7AFBF50C.jpg I had the pressure plate fully rebuilt as well, I even had it upgraded from 1500lbs to 2200lbs http://i487.photobucket.com/albums/r...t/A6382F0F.jpg |
Nice dude I would recomend to paint the engine bay with por15 and then semi gloss black instead of satin just because satin is extremelly difficult to keep clean just my .02 cents.
|
ROTARYCRAZY- I like your idea, heaven knows I don't want to scrub my engine bay again. I will try and find a dealer for the POR 15, I have not seen that stuff anywhere. I'll talk to my painter and ask him for some paint swatches showing me semi gloss black.
The engine bay should be ready to paint early next week. |
Looks great Gabe....:nod:
|
Originally Posted by simgabe
(Post 10984188)
ROTARYCRAZY- I like your idea, heaven knows I don't want to scrub my engine bay again. I will try and find a dealer for the POR 15, I have not seen that stuff anywhere. I'll talk to my painter and ask him for some paint swatches showing me semi gloss black.
The engine bay should be ready to paint early next week. This shit is the bomb |
JIM- it will even look better with its new "heart" lol
|
With regards to the POR15, I have read it can be sprayed on and reduced no more than 5%.
Can you use a regular automotive spray gun? Anyone have any experience in this area? Thanks |
What I did was found a set on ebay it came with the cleaners and all neded for it I can't reamember how much it was but I did myne with a brush you can reduce it and still brush it on it will almost level itself out. Once its dry you can hit it with some 220 and 450 sand paper and paint over that. FIY wear gloves using this stuff or it will not come off your hands for weeks. But once you do that you won't have worry about your engine bay rusting ever again
|
Apparently with the POR15, the dealer told me there are certain nozzles, tips, (cant remember) that I can buy for the paint gun to spray it on. I am getting a quart of semi gloss, I will see what it looks like when it dries and if I like it I may just leave it. If not I will go over it with an automotive two part semi gloss. Pics will be up next week.
I am also getting back my parts from the powder coating shop. I went with "satin black" for the UIM and LIM. for all the other accessories I went with a color called "Silver Vein" I had originally wanted to go with "Dormant Purple" but it was gonna cost me way more to get it done as its a two stage powder coating job. Cant wait! |
this is what it my looked like before
http://sphotos.xx.fbcdn.net/hphotos-..._1852035_n.jpg and this is once it was all done http://a3.sphotos.ak.fbcdn.net/hphot..._4396091_n.jpg http://sphotos.xx.fbcdn.net/hphotos-..._6799994_n.jpg |
All times are GMT -5. The time now is 04:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands