Lookin good Dave!
DF - I've seen that pic you posted before, it always makes me take a double take lol, it also makes me with they'd make a 2 door impreza again....

here's where i'm currently at. i started the day and finished replacing the pedal assembly, installed the heating and a/c/ system, replaced the vents on the firewall, installed pioneer speakers into the front speaker locations, installed the speaker covers, replaced the ignition switch, and got the dash installed.

when i started today:

http://i636.photobucket.com/albums/u...b/DSC00739.jpg

repaired inlet duct:

http://i636.photobucket.com/albums/u...b/DSC00740.jpg

http://i636.photobucket.com/albums/u...b/DSC00745.jpg

where i ended before work:

http://i636.photobucket.com/albums/u...b/DSC00747.jpg

looking good.

A good days work Dave! Really coming along impressively.

thanks Mike!! i got a few more things dont but didn't take any pics. i will have plenty of pics to share this evening im sure ;) i'm actually considering putting a set of waffle wheels on the car.. may look kinda silly..thoughts?

Silly.

We won't know until ya do it. ;)

I had waffles with winter tires on my 83 S for a few months about 6 years ago and I swore never to put them back on lol.
Apologies to the SA guys but the waffles are definatly not my thing ;)

they look ok on an FB actually, better than the + wheels

well after much thought , i think the plan will be to retain the stock sunrise red color. i will add a mazda three piece imsa spoiler and install the set of LE wheels i have in my garage. i saw this car for sale here on the forum and i really like the look of it with the imsa and the weds wheels. i thought though that the LE wheels would look nice and i would paint the imsa spoiler sunrise red to match. this is the car that inspired me to stay with sunrise red (that and changing the color will require more down time due to me not having an air compressor):

http://i636.photobucket.com/albums/u...andbike015.jpg

http://i636.photobucket.com/albums/u...andbike018.jpg

yeah that does look good. Makes me wish I'd stayed with the original sunrise red on my 83 S.... You wouldn't want to paint the imsa spoiler black like he did?

no, the spolier would be painted to match the car. i don't much care for opposing colors.

its been a few days since i updated. i'll get some more pictures tomorrow and post them,

can't wait to see them.

sorry it took so long to get the pics up. i havent had much time to work on the car but here's where i'm at:

http://i636.photobucket.com/albums/u...b/DSC00769.jpg

http://i636.photobucket.com/albums/u...b/DSC00767.jpg

http://i636.photobucket.com/albums/u...b/DSC00765.jpg

http://i636.photobucket.com/albums/u...b/DSC00764.jpg

http://i636.photobucket.com/albums/u...b/DSC00756.jpg

http://i636.photobucket.com/albums/u...b/DSC00762.jpg


next rust repair that i'm going to fix:

http://i636.photobucket.com/albums/u...b/DSC00766.jpg

the corroded and ruined odometer:

http://i636.photobucket.com/albums/u...b/DSC00753.jpg

http://i636.photobucket.com/albums/u...b/DSC00754.jpg

http://i636.photobucket.com/albums/u...b/DSC00755.jpg

take the little C clip off the end of the odometer shaft turn numbers to 777,777 and take the car somewhere for an oil change, or something and watch the service guys eyes bug out.

i did it with an FC i put together once, it was fun. i almost did it to peepers too, but i just set it at zero

i wouldnt mind taking apart another known good one and just putting it back at the exact mileage of the car. right nowe i have the speed/odometer from the GSL in there and it shows 193K.

i wanted to give an update. i started working on the SE again yesterday. i pulled the nasty ol rusty bin frames out, replaced them with a good frame set, and installed more maroon trim near the bins. here are the pics:

old rusty frame:

http://i636.photobucket.com/albums/u...b/DSC00795.jpg

frame out:

http://i636.photobucket.com/albums/u...b/DSC00796.jpg

http://i636.photobucket.com/albums/u...b/DSC00798.jpg

new frame installed: bins back in with maroon trim installed:

http://i636.photobucket.com/albums/u...b/DSC00801.jpg

http://i636.photobucket.com/albums/u...b/DSC00803.jpg

Awesome project. Will you be using a 12A or 13B?

well to start i plan on using a completely stock 13B from an SE. down the road i want to rebuild and install the original S4 TII engine that originally came in my 88 10AE. it lost compression long before i bought the car and i yanked it and replaced the engine (link to my 10 AE restoration: https://www.rx7club.com/build-threads-294/my-10th-anniversary-project-not-56k-friendly-720132/). i've had the engine sitting on a shelf for years and i can't think of a beter place to put the engine.

i would also like to find a complete SE suspension and reinstall that. using the non SE suspension was my only option as i had to get the car home. i havea set of 83 LE wheels i may use in the mean time and i want to install the 3 piece imsa rear spolier that i have as well.

made a little progress today.. i started the rust repair in the hatch channel, installed the left front brakes, and am reinstalling the red hood..which has to come back off due to a bent lip on the header panel.

hatch channel with rust:

http://i636.photobucket.com/albums/u...b/DSC00808.jpg

with rust sanded down and por 15'd (will get a second coat in the afternoon):

http://i636.photobucket.com/albums/u...b/DSC00814.jpg

left front brakes complete with S4 4 lug caliper )will do the same on the right front as i have a pair of fresh reman S4 4 lug calipers):

http://i636.photobucket.com/albums/u...b/DSC00812.jpg

H1 hood off, awaiting the sunrise red hood..which is on there currently, but cannot be mounted properly with the bent header panel:

http://i636.photobucket.com/albums/u...b/DSC00813.jpg

here's the weekend update. i installed the sunrise red hood that came on the car and i buffed it out. the paint really isn't all that great but i was just hoping for some protection from the elements should it have to go outside at all.

new hood on and buffed:

http://i636.photobucket.com/albums/u...b/DSC00856.jpg

http://i636.photobucket.com/albums/u...b/DSC00861.jpg

finished up the right front brakes (wil replace the hoses closer to when the car will be on the road):

http://i636.photobucket.com/albums/u...b/DSC00857.jpg


final coat of por 15 in the hatch channel

http://i636.photobucket.com/albums/u...b/DSC00859.jpg

pic of the interior as it sits:

http://i636.photobucket.com/albums/u...b/DSC00867.jpg

Do you need to Sand/shape the POR-15?

no. its just like paint that you would paint over metal except that its oil, gas, chip, weather, etc resistant. claims to instantly stop rust. before i apply it (to stop the rust and fill in pin holes) i sand the area down with a wire wheel and clean up as much rust as possible. the por 15 likes a pourus surface so that it bites in well. it is paintable and does require a special por 15 primer in order for normal paints to adhere to it.. so before i paint the car i am going to apply a final thin layer and primer over that so the ppg paint will stick to teh por 15.

just a small update for the day, i reinstalled the hatch seal over the newly dried POR-15 and installed the rear hach trim. here are a couple pics from today:

hatch seal installed:

http://i636.photobucket.com/albums/u...b/DSC00875.jpg

hatch trim installed:

http://i636.photobucket.com/albums/u...b/DSC00876.jpg

random rear pic:

http://i636.photobucket.com/albums/u...b/DSC00880.jpg