never used
https://i648.photobucket.com/albums/...S/DSCF1512.jpg https://i648.photobucket.com/albums/...S/DSCF1515.jpg https://i648.photobucket.com/albums/...S/DSCF1513.jpg https://i648.photobucket.com/albums/...S/DSCF1516.jpg https://i648.photobucket.com/albums/...S/DSCF1514.jpg https://i648.photobucket.com/albums/...S/DSCF1517.jpg new speakers https://i648.photobucket.com/albums/...S/DSCF1529.jpg |
https://i648.photobucket.com/albums/...S/DSCF1507.jpg
https://i648.photobucket.com/albums/...S/DSCF1509.jpg https://i648.photobucket.com/albums/...S/DSCF1501.jpg https://i648.photobucket.com/albums/...S/DSCF1506.jpg https://i648.photobucket.com/albums/...S/DSCF1502.jpg a little rough https://i648.photobucket.com/albums/...S/DSCF1500.jpg storage bins are just starting to rust so it will be very easy to take care of :D https://i648.photobucket.com/albums/...S/DSCF1521.jpg https://i648.photobucket.com/albums/...S/DSCF1519.jpg https://i648.photobucket.com/albums/...S/DSCF1520.jpg no exterior wheel well rust! https://i648.photobucket.com/albums/...S/DSCF1532.jpg https://i648.photobucket.com/albums/...S/DSCF1531.jpg |
the parts lol
https://i648.photobucket.com/albums/...S/DSCF1524.jpg https://i648.photobucket.com/albums/...S/DSCF1525.jpg https://i648.photobucket.com/albums/...S/DSCF1526.jpg https://i648.photobucket.com/albums/...S/DSCF1527.jpg https://i648.photobucket.com/albums/...S/DSCF1528.jpg https://i648.photobucket.com/albums/...S/DSCF1523.jpg new mazda parts https://i648.photobucket.com/albums/...S/DSCF1522.jpg more ugly red carpet https://i648.photobucket.com/albums/...S/DSCF1518.jpg |
the car is a little rough however it's in pretty good shape and has relatively low miles. i haven't checked compression yet, but i took the plugs out and turned it over and it sounds very strong so i'm sure it will be burning my eyes very soon lol
|
someone bought the wrong color vinyl spray, but yeah other than that i think you have all the pieces to make it really nice.
if it was mine i'd restore it to 100% stock, except with panasports, and maybe exhaust... |
well i have a GSL that i'm kinda restoring that's here in the build section so i might swap a few pieces over to that one. eventually this will end up being my new widebody car, but for now i'm going to clean it up and drive it.
|
pull it apart and bridge it before you get many more miles on the engine ;)
|
glovebox light indicates a GS model. S models had no glovebox light. most people will add the aluminum wheels and can add power mirrors easily, but most don't monkey with with swapping out a glovebox light. i'm thinking it may actually be a GS after a second look and hearing about the glovebox light on your car. either way, nice score on the car!
|
Originally Posted by mazdaverx713b
(Post 11130079)
glovebox light indicates a GS model. S models had no glovebox light. most people will add the aluminum wheels and can add power mirrors easily, but most don't monkey with with swapping out a glovebox light. i'm thinking it may actually be a GS after a second look and hearing about the glovebox light on your car. either way, nice score on the car!
|
Do my eyes deceive me, or is that an SA front frender in the third picture?
|
i'm pretty sure that is an SA air dam! not sure how they got it, but it's awesome lol.
Curtis i'm pulling the car apart now to go through it and take care of any surface rust right away so when go crazy and make it a widebody i have less to worry about lmao |
pretty sure the air dam is from an SA. could be wrong
http://i648.photobucket.com/albums/u...S/DSCF1496.jpg i put her to work lmao http://i648.photobucket.com/albums/u...S/DSCF1539.jpg http://i648.photobucket.com/albums/u...S/DSCF1541.jpg http://i648.photobucket.com/albums/u...S/DSCF1542.jpg somebody failed! http://i648.photobucket.com/albums/u...S/DSCF1544.jpg |
removal of air pump
https://i648.photobucket.com/albums/...S/DSCF1533.jpg https://i648.photobucket.com/albums/...S/DSCF1538.jpg removal of a/c pump https://i648.photobucket.com/albums/...S/DSCF1534.jpg https://i648.photobucket.com/albums/...S/DSCF1536.jpg https://i648.photobucket.com/albums/...S/DSCF1537.jpg https://i648.photobucket.com/albums/...S/DSCF1535.jpg whoever painted these....... suck! https://i648.photobucket.com/albums/...S/DSCF1546.jpg https://i648.photobucket.com/albums/...S/DSCF1551.jpg https://i648.photobucket.com/albums/...S/DSCF1548.jpg |
coming along well Mike! did you get it running yet?
|
Originally Posted by Hec's 79 gs
(Post 11130179)
How about a swaybar no swaybar in the rear? Will that answer if its s or gs like in SA's?
-aluminum wheels -glove box light -rear cargo light -power mirrors the GS hat the three latter features but did lack the aluminum wheels, though most dealers installed them or ordered the 7's with them. not only to turn an extra profit, but because they were a good choice. the a/c and the aluminum wheels were options for both the S and the GS. |
thanks Dave!
I've started if successfully a hand full of times and it runs great. The throttle linkage is messed up and not working properly and the carb isn't getting gas even though the new pump is clearly working. I'm taking the interior out to get rid of the surface rust while it's early lol |
you may want to remove the tank and see if the gas has carmelized and clogged the pickup, pickup strainer or has left a layer of sediment on the bottom of the tank causing fuel flow issues. check the fuel filter and see if it has sediment in it or if its clogged.
once you determine the tank situation and the filter situation, and before you reinstall the tank, see if you can blow through the feed line from the carb back to the tank. this will let you know if gas has hardened in the fuel feed line. finally, or before all of the process i listed, remove the feed line from the carb and place it in a suitable container. crank the engine and see how fuel is flowing up to the carb. if the flow is good and the gas is clear, don't bother dropping the tank. if everything looks good up to the carb, then it looks like its carb rebuild time! |
from what the guy said he had a shop rebuild the carb........ that he spent $450 on! i know he was spraying all kinds of crap into the top of the carb to get it to run so every time i start it it smokes out the garage and stinks like crap, but it runs well lmao.
|
well i did a little work on the car tonight. i removed some more of the interior and cleaned it out. i also messed around with the old emblems off my GSL.....
http://i648.photobucket.com/albums/u...S/DSCF1573.jpg http://i648.photobucket.com/albums/u...S/DSCF1574.jpg http://i648.photobucket.com/albums/u...S/DSCF1576.jpg not really sure about this one yet! http://i648.photobucket.com/albums/u...S/DSCF1572.jpg the car will eventually be painted and refined, but i figured i'd mess with it a little just to see what i liked or not. |
I'm way jealous of your factory radio!!!
|
hahaha i have a few, but i'm using them all
|
just picked up a half bridge 12a and many other parts..... will post new pics soon :)
|
mmmmmm....half bridge...my favorite. Please post sound clip when running.
|
is that a kamei air dam? looks like a good platform, ill watch this thread.
|
All times are GMT -5. The time now is 09:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands