1 clean fb turbo build.
 

So bought the car two years ago. Been restoring it little by little. The exterior/interior and suspension is done. So now to get Moar power.

FIRST things first j started ripping out everything that I absolutely do not need. I want close to 0 wiring. Clean up the motor blah blah blah.

Let's just get to some pics of the car and progression.

Attachment 535231



Attachment 535232



Attachment 535234



Attachment 535241



Attachment 535240



Attachment 535238



Attachment 535237



Attachment 535236



Attachment 535235



Attachment 535231

Called rotary shack told them my plans yo run e85 and power goals. So he started building my custom setup with his parts. Weber carb/shack manifold/shack hat/.

Here is the before. Carb.



Attachment 535248



Attachment 535247



Attachment 535246



Attachment 535245



Attachment 535244



Attachment 535243



Attachment 535242

After my custom specs and put back togethor.



Attachment 535256



Attachment 535255



Attachment 535254



Attachment 535253



Attachment 535252



Attachment 535251



Attachment 535250



Attachment 535249

Want to add some bling and replace old items with new. So I nodded the factory coolant reservoir to work on my weaponr coolant overfill can.

Don't worry that side was cleaned afterwards. Second pic

Attachment 535257

Removed beehive and out fc oil spout. Installer with Oil sandwich plate and added oil pressure guage. And oil feed port.

Attachment 535260


Intercooler off a Volvo I'm using
Attachment 535261


Turbo prepped for paint.
Attachment 535262

So far I need to finish plumbing fmoc I ordered all the fittings should be done next week.

Install stage 5 clutch.

Wait for rotary shack to send my parts.

Sell this bad boy. Brand new. Found out wouldn't work with boost. So I need a fuel pump and regulator.

Attachment 535263

I'll post up some pics as I go.

Nice intercooler. I found an Audi intercooler I want to use, but I don't know if I can squeeze it in there with the FMOC,A/C,and the radiator. I dunno I'll figure it out when I get there :P

Hahaha yea I removed all that stuff and trimmed down the metal sides so it would sit flush.