My スーパー耐久 ST-3 FD3S build thread (restore JDM endurance race car )
10-17-16, 06:20 AM
#153
Eats, Sleeps, Dreams Rotary
10-17-16, 10:08 AM
#154
RE for life
Thread Starter
There is very few people use this in tsiwan
And is,for my race car I will take more serious on this
10-17-16, 11:14 AM
#155
RE for life
Thread Starter
Finally, no mater how gental u are
The FD transmission is time bomb~
Doing a transmission swap in the shop
With good jdm.core
A bit haasel to swap all my cooiling line to new core😵
The FD transmission is time bomb~
Doing a transmission swap in the shop
With good jdm.core
A bit haasel to swap all my cooiling line to new core😵
Last edited by diyman25; 10-17-16 at 11:23 AM.
10-24-16, 11:13 AM
#158
RE for life
Thread Starter
Few day before my endurance race
I install a 30L water inhection tank in my car
That really take up a lot of space on rear😌
I install a 30L water inhection tank in my car
That really take up a lot of space on rear😌
Last edited by diyman25; 10-24-16 at 12:10 PM.
10-27-16, 06:41 PM
#161
RE for life
Thread Starter
A hour endurance for this weekend
Time for some early pratice
Despite of extra weight and hot weaterher
I pull off constant 54 not my fastest lap but I am using old tires, which I think if I can hold this pase at race, I can should good for 2 place
Time for some early pratice
Despite of extra weight and hot weaterher
I pull off constant 54 not my fastest lap but I am using old tires, which I think if I can hold this pase at race, I can should good for 2 place
11-02-16, 02:31 AM
#163
RE for life
Thread Starter
My lap time improve 3 sec~
When switch to A005 advan slick
I think after a year of trying I finall figure out the right gear ratio for my car
On the mini sprint race (10 laps)
When I am dog fight with first place
I notice I have weird sound come from left front
At that time I thought I have flat or bearing
It end out as wheel bearing………
Chang to spare one, and hold up rest of weekend!!!!
When switch to A005 advan slick
I think after a year of trying I finall figure out the right gear ratio for my car
On the mini sprint race (10 laps)
When I am dog fight with first place
I notice I have weird sound come from left front
At that time I thought I have flat or bearing
It end out as wheel bearing………
Chang to spare one, and hold up rest of weekend!!!!
11-06-16, 12:17 AM
#166
RE for life
Thread Starter
The race are mix between FR FF AWD
Top 3 car of that racs
Ej25 86 estimate about 450hp 1.51.4
Sec is my RX7 stock engine & TURBO 1.51.8
Third is WTCC spec Honda FD2 fully build engine with 6 speed seq 1.52.3
Top 3 car of that racs
Ej25 86 estimate about 450hp 1.51.4
Sec is my RX7 stock engine & TURBO 1.51.8
Third is WTCC spec Honda FD2 fully build engine with 6 speed seq 1.52.3
Last edited by diyman25; 11-06-16 at 04:19 AM.
11-07-16, 05:56 AM
#168
RE for life
Thread Starter
11-08-16, 01:56 AM
#170
Eats, Sleeps, Dreams Rotary
11-10-16, 09:24 AM
#171
RE for life
Thread Starter
Some of my quLify lap from race
I only did 3 laps , I did not even try to brake in tire,as u can see still pretty slippy
Did a 52.2 I think the final race I should crack into low 51!!!
I only did 3 laps , I did not even try to brake in tire,as u can see still pretty slippy
Did a 52.2 I think the final race I should crack into low 51!!!
11-10-16, 07:11 PM
#172
Some of my quLify lap from race
I only did 3 laps , I did not even try to brake in tire,as u can see still pretty slippy
Did a 52.2 I think the final race I should crack into low 51!!!
https://youtu.be/5yGbZbz1Mvs
I only did 3 laps , I did not even try to brake in tire,as u can see still pretty slippy
Did a 52.2 I think the final race I should crack into low 51!!!
https://youtu.be/5yGbZbz1Mvs
Love it!
11-12-16, 08:56 AM
#173
RE for life
Thread Starter
The tire was brand new, car will be much quicker after few laps
11-19-16, 12:38 AM
#175
Eats, Sleeps, Dreams Rotary
I think if you set up the car for turn before the straight and, more importantly, the left and right hand turns that follow you be able to get the best laptimes.
But it will terrifying.
But it will terrifying.