Dylan's fd3s time attack build
My names Dylan Scannell im 21 years old. I've been working on my rx7 for over a year now mostly buying parts for the build and working on it whenever i get a chance on the weekends so its been a relatively slow build for the most part. For the past year i was working alot of overtime and going to school at night so my only time to work on the car was real late at night. With the help of Junior and Vito from JMR Garage and Navin from Speedtek i am hoping to get this car together asap so it at least sees the track a few times this season.
current parts: koyo racing radiator custom exhaust manifold built by Speedtek Greddy 3 row 32R intercooler New Bridgeported 13b-rew race clearanced Rx-parts seals Borg Warner 67mm turbo 2200cc ID injectors 2 38mm tial wastegates tial 50mm bov feed front bumper carbon diffuser exedy twin disc clutch 2 walbro fuel pumps gram lights 57DR wheels 18 x 9.5 +38 BC coilovers dual mocal oil coolers full pulley set hks twin power brembo big brake kit rywire mil-spec harness RX parts intake manifold Nrg short hub and quick release momo steering wheel schroth racing harness 15 gal atl fuel cell kaaz diff ... alot more that i cant think of right now but thats pretty much whats sitting in front of me lol |
1 Attachment(s)
The day i got the car
Attachment 677020 |
3 Attachment(s)
What the engine bay looked like.. blew the seals after the first night of beating the piss out of it lol
Attachment 677017 After we pulled the motor Attachment 677018 Engine bay finally sprayed ferrari grigio silverstone Attachment 677019 |
5 Attachment(s)
Junior at JMR garage startedAttachment 677012 working on the 10 point roll cage
rear X is complete Attachment 677013 looks pretty sick from the outside Attachment 677014 My friend paul and i started priming it to prevent it from rusting while we put the car back togetherAttachment 677015 Attachment 677016 |
Do you have any pictures of the Rywire harness installed or even at all? I'm looking into buying one, but I'd like to see how it lays out in the bay.
|
Looks great so far; love the progress and looking forward to more!
|
I like where this is going! Good luck
|
sorry guys i havnt responded i had to put the build on hold for a little while but im back into it doing the fuel cell and body harness this week. I will be posting pics within the next week or so of the progress!!
|
Originally Posted by ZumSpeedRX-7
(Post 11482864)
I like where this is going! Good luck
thanks alot i appreciate it. i have big plans for this car and now have everything i need for the most part to complete the build. its just a matter of getting everything together now |
Originally Posted by RE-Amemiya
(Post 11482823)
Looks great so far; love the progress and looking forward to more!
|
|
we started fitting the ATL fuel cell and making a cardboard stencil to send to the metal shop at JMR http://i40.tinypic.com/2lwoy7t.jpg
|
[IMG]http://i41.tinypic.com/i4pcp2.jpg[/IMG]
|
Engine pics!
|
Engine pics!
|
http://i41.tinypic.com/2po4oqt.png
Junior at JMR Garage finished fitting the sheet metal. I am going to rivet it down after the interior and cage is painted this winter. What do you guys think should i paint the sheet metal black to match the interior or leave it raw!? |
http://i43.tinypic.com/2nlvk40.jpg
Considering going with the feed widebody fenders. I already have the front bumper, canards, side steps and diffuser. What do you guys think!? |
Serious build, hope to see some vids on track.
|
Originally Posted by Brekyrself
(Post 11520212)
Serious build, hope to see some vids on track.
|
Nice build! any pics of the fuel cell cradle?
|
Haven't posted in awhile i've been pretty busy. But heres some pics of the progress. We've been working on the FD for the past few weeks and are hoping to get it running within the next month or so.
http://i57.tinypic.com/33mwh0m.jpg |
|
|
I've decided I'm going to go with an electric davies craig water pump so we're going to be removing the other pump but heres some of the progress in the engine bay.
http://i62.tinypic.com/2qs9xtj.jpg |
I'm also not going with that turbo that is friends turbo a bit larger than my 67mm BW. We used it to mock up for the exhaust manifold. I went with 2 38mm tail waste gates and a tail bov.
|
All times are GMT -5. The time now is 04:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands