|
I tested half of them that was easy to get to and all of them turn out fine. if my twin starts to behave weird or not boosting correctly I'll then pull the UIM and test the rest and also switch out the blue silicone to black for a cleaner look. also replace the injectors and FPD.
|
Yo, that Y pipe doe. 😂👍🏻
|
thanks to a special friends ;D
|
small update:
https://cimg2.ibsrv.net/gimg/www.rx7...60cd9a657d.jpg new water neck/ pump assembly in. along with new FC thermoswitch and new thermostat https://cimg3.ibsrv.net/gimg/www.rx7...e9fc8fcfd5.jpg fitted the intercooler and Y pipe https://cimg4.ibsrv.net/gimg/www.rx7...63f6b77510.jpg fitted everything the best way possible and came across this ! no room to wiggle i thought i might have to spend a few more dough to get a greddy elbow and a connecting pipe for it to fit good.:( re-positioned the SMIC and a little bit of trimming .... https://cimg7.ibsrv.net/gimg/www.rx7...463482d371.jpg https://cimg8.ibsrv.net/gimg/www.rx7...8ef49eecaa.jpg fits now ~~ yay going to buy new black couplers so it all matches .. maybe even powercoat everything black to look natural so its all buttoned up and began testing the twins secondary boost . twins are working as they should but now im running into misfiring above 4500 rpm while in full boost . didn't notice before because the secondary never worked... more trouble shooting... :scratch: first things is to change the spark plugs and go from there.. |
https://cimg9.ibsrv.net/gimg/www.rx7...0e1958f153.jpg
newly acquired knightsports intake !!in very great condition ... i might just repaint this piece and with new hardware so it shines ~~ |
small update,
changed the spark plugs. they were really bad. probably old aswell. change then out to all oem 7s and 9s boom. no more misfire and twins are working great. primary 11psi and transition to 10~9 psi. and secondary a solid 9~10psi a second vacuum hose job will be done in the near future along with cleaned injectors new FPD and new fuel pump |
https://cimg7.ibsrv.net/gimg/www.rx7...647a9375fa.jpg
as of now. the plan is to get matching black couples all around, change the vacuum hose to all black and powder coat the SMIC/piping,cross over pipe and perhaps the UIM. |
Damn, bro. You get busy in that garage. Make me jealous, why don't you.
|
haha. thanks? I try to collect all the necessary parts and get portion of things done at once instead of over a period of time .
still...things pops up and need this and need that. never as smoothly as planned ;( |
For the door handle, did you replace the whole part in your picture? Or just the outside part that you pull on? My drivers side door doesn't open and I've never been able to figure out why. I've only replaced the pull part with the aluminum replacements they make.
|
Originally Posted by theagavejazz
(Post 12158953)
For the door handle, did you replace the whole part in your picture? Or just the outside part that you pull on? My drivers side door doesn't open and I've never been able to figure out why. I've only replaced the pull part with the aluminum replacements they make.
|
small update.
now onto to the suspension side of things.....fun..... teaser https://cimg7.ibsrv.net/gimg/www.rx7...137da1b656.jpg very very busted https://cimg0.ibsrv.net/gimg/www.rx7...33b3183f83.jpg https://cimg3.ibsrv.net/gimg/www.rx7...e34fe782c6.jpg https://cimg4.ibsrv.net/gimg/www.rx7...0583d22162.jpg superpro ;) |
|
Good stuff.
Fuel filter reminds me of my first fuel filter replacement which was not fun. |
Originally Posted by kensin
(Post 12158969)
if you look at the L shaped rod and hinge where theres a big fat spring , you can see that the spring assembly is very worn out and thus not making it have enough tension anymore to have leverage to pull the cable . at least that's what my case was. i just replaced the assembly with a low mileage one that i bought from the for sale section. are you able to pull the handle at all ? is it stuck shut or is it pulling freely with out opening the door ? if its stuck most likely a cracked handle plus loose springs causing it to jam some where. open it up and take a look
|
I dread the day I have to remove my fuel filter.
|
update ~
https://cimg8.ibsrv.net/gimg/www.rx7...5135dcb63f.jpg Ohlins recommended setting https://cimg0.ibsrv.net/gimg/www.rx7...8ccb4a5b91.jpg J-auto Toe link and Trailing arms https://cimg2.ibsrv.net/gimg/www.rx7...0efc3a7bb7.jpg J-auto pillow ball bushings |
just a few things on the waiting list
https://cimg5.ibsrv.net/gimg/www.rx7...06d3e37888.jpg power FC OLED https://cimg3.ibsrv.net/gimg/www.rx7...563d0d31df.jpg front speakers adapter for 6.5 https://cimg4.ibsrv.net/gimg/www.rx7...95b2bda945.jpg turbojeff battery tray . time to start saving for a nice 51R https://cimg6.ibsrv.net/gimg/www.rx7...a34892c840.jpg much needed missing map pocket Lid ;D (cant wait for this one to be installed ) |
Were did you get the speaker adaptor?
And did you replace any other bushings? I found after 60k miles, the only good bushings I had were the trailing arms (and maybe the toe links, but I didn't check those) |
Originally Posted by TomU
(Post 12160207)
Were did you get the speaker adaptor?
And did you replace any other bushings? I found after 60k miles, the only good bushings I had were the trailing arms (and maybe the toe links, but I didn't check those) here buddy I have not replace other bushings beside the pillow balls. the rest on mine are still in decent condition it is in the future plans replacing with new oem for the entire front along with new brake system and some new bearings and wheels. aaahhh the journey |
no sleep for the wicked lol
back at it again https://cimg0.ibsrv.net/gimg/www.rx7...4cfb95326b.jpg old and busted https://cimg1.ibsrv.net/gimg/www.rx7...34f3170457.jpg new hotness https://cimg3.ibsrv.net/gimg/www.rx7...794e615368.jpg looks like somthing from the aliens https://cimg4.ibsrv.net/gimg/www.rx7...55446077fb.jpg with ohlins front and somthing new that does NOT look like somthing from the aliens https://cimg0.ibsrv.net/gimg/www.rx7...09a55f7e1c.jpg im sure these were original .. but not anymore !! https://cimg2.ibsrv.net/gimg/www.rx7...77d2d7f064.jpg new |
Nice work on the tie rods and dust boots. Where you source them?
|
Originally Posted by Narfle
(Post 12162795)
Nice work on the tie rods and dust boots. Where you source them?
|
today i took the FD out of storage to wash it and maybe cruise a little bit
https://cimg4.ibsrv.net/gimg/www.rx7...2bf113eb57.jpg https://cimg9.ibsrv.net/gimg/www.rx7...b0f3a79796.jpg |
all buttoned up and clean
https://cimg1.ibsrv.net/gimg/www.rx7...7f5415ded6.jpg https://cimg2.ibsrv.net/gimg/www.rx7...2a9a52a568.jpg |
| All times are GMT -5. The time now is 12:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands
