subscribed! I like where this is going.
|
Originally Posted by Mikelivi91
(Post 12246224)
Awesome build! Excited to see the rest of the progress
Originally Posted by Brody8877
(Post 12246446)
subscribed! I like where this is going.
|
Wow Awesome build! Cant wait for more updates!
|
Epic build going on here!
My buddy has his Subaru at Vex right now and I have heard good things from him also. Nice to have a decent rotary shop in the area! Looking forward to seeing how the build progresses and I very much hope I can see the car in person this summer. Perhaps we can actually get a rotary meet to happen for 7's day in Alberta :icon_tup: |
Some more progress..
custom Thermal Zero heat blanket for turbo. https://farm1.staticflickr.com/785/4...8b1c297d_b.jpg Custom tweeter pods for A pillar... (wrap job not final) https://farm1.staticflickr.com/808/4...929ad353_k.jpg https://farm1.staticflickr.com/896/4...9db65521_k.jpg The fuel system nearing completion... walbro 400 lift pump with twin walbro 400's in tank (with room for a 3rd if required down the road. https://farm1.staticflickr.com/916/4...4146f7b4_k.jpg Battery box and howerton engineering tank back from coating - still needs carpet and finishing touches done https://farm1.staticflickr.com/842/3...k.jpg[/img |
Car is back on the hoist finally, hoping to hit the dyno by end of June - will be hopefully taking the car to Street Machine Weekend in Lethbridge, took vacation off just to go so fingers crossed.
Tires came in, NT555R's for the rear. Keeping same wheels for this year. |
Originally Posted by 403rx7
(Post 12277953)
Car is back on the hoist finally, hoping to hit the dyno by end of June - will be hopefully taking the car to Street Machine Weekend in Lethbridge, took vacation off just to go so fingers crossed.
Tires came in, NT555R's for the rear. Keeping same wheels for this year. if you do hit up Street Machine Weekend let me know - I won't be attending but if you are interested I would be keen to meet you en route so we can have a look over each others cars :icon_tup: |
Originally Posted by FEED AFFLUX v5
(Post 12281595)
Thanks for the updates - keep 'em coming!
if you do hit up Street Machine Weekend let me know - I won't be attending but if you are interested I would be keen to meet you en route so we can have a look over each others cars :icon_tup: Some more progress updates... getting closer to dyno time... https://farm2.staticflickr.com/1722/...113403b6_k.jpg Exhaust built... GleaseMan 4" downpipe to a 4" custom exhaust to a Apexi N1-Evolution-R muffler https://farm2.staticflickr.com/1743/...57bd0217_k.jpg https://farm2.staticflickr.com/1743/...2058a84a_k.jpg https://farm2.staticflickr.com/1759/...4073fc2b_k.jpg https://farm1.staticflickr.com/883/4...4722a270_z.jpg https://farm2.staticflickr.com/1750/...fc48553f_k.jpg NT555R's in for the rear https://farm2.staticflickr.com/1734/...6e2c536b_h.jpg Exhaust, Wastegate Dump, Turbo, Manifold all wrapped in Thermal Zero https://farm2.staticflickr.com/1735/...878fa344_k.jpg https://farm2.staticflickr.com/1734/...b81795db_k.jpg https://farm1.staticflickr.com/891/4...489a0cb6_k.jpg https://farm1.staticflickr.com/879/4...1096a4d1_k.jpg |
Idler to ensure full belt contact on water pump pulley..
https://farm2.staticflickr.com/1726/...7614dfa8_k.jpg https://farm2.staticflickr.com/1725/...8a6b7f7c_k.jpg |
Very nice, that looks great!
|
What RPM is that idler spinning at? I hope the bearing is rated for it.
|
Originally Posted by TwinCharged RX7
(Post 12311073)
What RPM is that idler spinning at? I hope the bearing is rated for it.
|
Water pump pulley's are not a common problem. As long as you don't over tension the belt. Many people don't run an older and do just fine. A tiny 15-20k rpm idler sounds like a bigger failure risk.
|
Originally Posted by TwinCharged RX7
(Post 12311243)
Water pump pulley's are not a common problem. As long as you don't over tension the belt. Many people don't run an older and do just fine. A tiny 15-20k rpm idler sounds like a bigger failure risk.
Eventually I'll be moving to an all electric setup regardless. |
What brand is the idler pulley ? keep on updating bud :icon_tup: |
Originally Posted by 7krayziboi
(Post 12311361)
What brand is the idler pulley ? keep on updating bud :icon_tup: Pulled it outta the garage after parking it for 2 months, started up not bad, still got some fine tuning to do. Shakes the entire house lol flic.kr/p/2cs56xu (idle video) Here was the results, low boost for now... eventually go for race gas or E85 (we dont have it at the pump up here so not an easy option) https://farm2.staticflickr.com/1931/...e1914c44_c.jpg |
Update on this build?
|
Originally Posted by 7_rocket
(Post 12407165)
Update on this build?
Picked up a set of Volk TE37 SAGA's is 18x9 and 18x10, wrapped in Michelin Pilot Sport 4S. Did a bunch of powdercoating of parts in the engine bay and wiper arms to clean things up, still more to go. Car ran excellent all last year on Shell 91 and any combination of ~E20 to E80. Never got the tank fully drained to run E85 since the dyno session. The flexfuel tuning was spot on, car adjusted flawlessly. I work in the oil industry so with the price of oil down in the dumps, I'll be shelving plans on T56/8.8 for now, would still like to do Recaro Pole Position leathers in the future and go 99 spec front. Time will tell. Update pics from the last few months of last year and this winter: https://cimg1.ibsrv.net/gimg/www.rx7...0b2639141f.jpg https://cimg2.ibsrv.net/gimg/www.rx7...9a356eaa96.jpg https://cimg3.ibsrv.net/gimg/www.rx7...33a8136d4a.jpg https://cimg4.ibsrv.net/gimg/www.rx7...5fec8bda9c.jpg https://cimg5.ibsrv.net/gimg/www.rx7...19bb2555bb.jpg https://cimg6.ibsrv.net/gimg/www.rx7...e1d16e07e3.jpg https://cimg8.ibsrv.net/gimg/www.rx7...1a0fc60c21.jpg |
Going through your build last night, it's very very close to my build but I haven't updated it in forever. You put a lot of money in this build. Did you update your fuel pump?
|
Originally Posted by 7_rocket
(Post 12407317)
Going through your build last night, it's very very close to my build but I haven't updated it in forever. You put a lot of money in this build. Did you update your fuel pump?
1 is a lift pump running @ high flow/low pressure into surge tank 2 are pumping into engine @ high pressure/lower flow from surge tank |
All times are GMT -5. The time now is 02:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands