|
2015 Global, Redline Garage Life Time attack FD3s build
12 Attachment(s)
Attachment 631642
Greetings guys, Daniel from Garage Life here. I figured its time to make a build thread for this car. we have built this car from the ground up to prepare for Global/Redline time attack. We are proud to announce that we have partnered up with Will Wattanawongkiri from Team WWR and Pink Ribbon Racing. This build is not only to show what a rotary motor can do, but more importantly to raise breast cancer awareness amoung the auto enthusiast community. Now with that being said, lets get onto the pictures and build information. https://www.facebook.com/itsgaragelife/timeline we would first like to start by saying thank you to our sponsors. we are honored to have these people by our side and deeply appreciate them supporting us on this endeavor. SPONSORS indotech motorsports (your one stop Miata shop, located in southern California) CRZY engineering (aero specialists, anything from front splitters to full underbody, located in souther California) Circuit Sports/Gears USA (top notch quality suspension components) Godspeed (anything from turbos to suspension) TCP magic japan (produces quite possibly the best looking body kit) Adaptronic EMS (best standalone ECU on the market) MOTOR 443 hp @ 17 psi on 91 octane tuned by Garage Life - 13bREW block -brand new rotor housings -polished stock port -RA classic seals -550/1300cc injectors -megan twinscroll exhaust manifold -turbonetics twinscroll turbo -turbonetics wastegate -aeromotive FPR -custom v mount intercooler set up -setrab dual oil and power steering coolers CHASSIS -6 point roll cage by Garage Life -fully stripped minus stock dash -TCP widebody kit -custom exhaust exiting fender by garage life SUSPENSION -1 of a kind 2 way adjustable coilovers designed and engineered by Circuit Sports/Gears USA -megan toe and trailing arms -tanabe sway bars -corner balanced by Toan at Platteforme a.g. BRAKES - Stoptech front BBK -Endless pads -Motul fluids ELECTRICAL -Adaptronic EMS -AEM wideband -AEM water injection kit -Greddy EBC -Greddy boost gauge AERO -Front splitter designed and made by Garagelife/Team WWR -flat underbody by CRZY engineering -rear diffuser by CRZY engineering -Voltex japan rear wing WHEELS - Motegi Traklites - Hankook TDs 2952 all around We have tested the car a few times already and the performance is phenomenal while paired with Will's driving ability, however, there is still ALOT of room to grow and develop. if you guys are interested in seeing more pictures and frequent updates, go ahead follow this list of people on instagram. itsgaragelife teamwwr jjchen918 subiedrake Attachment 631643 Attachment 631644 Attachment 631645 Attachment 631646 Attachment 631647 Attachment 631648 Attachment 631649 Attachment 631650 Attachment 631651 Attachment 631652 Attachment 631653 |
Holy Fuck My Cock
|
Yup this is gonna be good! sub'd!
|
1 Attachment(s)
Attachment 631552
Aero coming along.. Im also doing a side exit exhaust out the passenger fender, so this way we can utilize a full flat underbody! |
Subbed
|
Good work Dan!!! Easily one of my favorite all time kits!! Ecu? Is this the car I saw at Seven Stock under your tarp? Looking good!!!
|
2 Attachment(s)
|
3 Attachment(s)
|
2 Attachment(s)
testing went really well today.
Ran into some minor issues with the power steering rack leaking, and tire rubbing issues. We ended up removing our hankook td 295s and put on 2754018 street tires instead. We laid down a impressive time at streets of willow. More adjustments and work to do !! Attachment 630851 Attachment 630852 |
Car looks great dan!!! was going to try and head out there for a little yesterday but I couldn't get out of my own garage haha. Glad everything went good yesterday and I'm looking forward to checking this thing out next time youre out!
p.s. are those Trak-lites? Either way..I lvoe the wheels!! |
2 Attachment(s)
Aaron,
Yeah they are traklites. We had slight rubbing issues on the 295/40/18s going to try and refit the front fenders to fit them.. Attachment 630777 Attachment 630778 |
4 Attachment(s)
more photos from testing at Streets of willow
Attachment 630767 http://img.photobucket.com/albums/v6...pscc4cc0c5.jpg Attachment 630768 Attachment 630769 Attachment 630770 http://img.photobucket.com/albums/v6...psb8286631.jpg We are excited for this race season ! RD.1 Global timeattack 2 weeks away!! Il be wrenching the next two weeks and making sure this car is 100% |
4 Attachment(s)
Oh man what crazy two weeks. Been extremely busy testng and adjusting the susupension and aero. Now we have a car that is capable of sub 150s at Buttonwillow.
Attachment 629838 Attachment 629839 Attachment 629840 Attachment 629841 However on race day the rain was relentless! Our group session would be up and the rain would come out of nowhere. We were able to land 2nd place, if we just had a good dry lap we could have posted a very fast time.. On test day we were able to hit a 1:52 on old TD tires, bad brakes, megan coilovbers.. |
1 Attachment(s)
|
Aero looks great, and at sub 1:50 for BW13 its working too... Cool to see a high level rotary RX7 in TA, last one that caught my eye was Jack Mardikian's back 6 or 7 years ago.
|
Saw this car last weekend and it looks sick, I thought I might be the only rotary guy out there once I get my car done haha. Hopefully I'll be out there soon, I'll be in Limited RWD as well.
I've got some footage of the car in the pits and on track as well, I'll sort through it within the next couple of weeks. Sucks about the rain, it was really coming down towards the end of the day there, my shoes were completely soaked through for most of the day, not fun! |
what a beast! Looking forward to seeing some results :icon_tup:
|
1 Attachment(s)
I know Dan is beyond too busy to update this thread, so I will chime in.
They upgraded the car to an Adaptronic S6 FD Rx-7 PNP, and with ecu + more aggressive tuning only picked up almost 40 at the wheels. Also the clutch started slipping so it would have been even more! See attached dyno sheet. |
thanks for posting the dynograph! we are out here today at streets of willow testing! hopefully our first shakedown goes good! then tomorrow off to buttonwillow to prepare for competition day!
|
What are those new wheels I see on it?? bit of dish....
|
testing at streets of willow CCW
Friday morning we headout to streets of willow for more testing the new susupension setup from Circuit sports gears racing, and testing new adaptronic ecu. The car looked very fast out there and was very hard to get a solid hot lap in as there was much traffic. Michael Lin, Tommy, and Ted the engineer(designer of the susupension) was here to help dial in the coilovers. We were able to hit SUB 1:20, consistent 1:19s depending on traffic. A few really close to 1:18. This time is already fast enough for top 5 fastest of all time at streets of willow!
That night we headed out torwards Buttonwillow for more testing in preparation for Redline time attack round 1. Got there early and had a good 8 hours of sleep before testing again. We were hitting consistent 1:50 on buttonwillow config 13 cw, there was a lot of traffic making it hard for us to see what she can do. Playing around with tire pressures, recording tire temps, track temps, air temps, after hot/cold laps and recording a lot of data. We also had the Michael Lin, and Ted of Circuit sports dial in our suspension. Our day ended early again due to rain. We were very confident we can break in to the 140s zone. Headed back to the hotel and made a to do list. After talking with Elliot@turblown I had some very good tuning advise on fixing the throttle response from decel. I also setup auto tune close loop and trusted the ecu to do my job as I am too busy to keep up with the unpredictable weather changes from very cold to very hot to cold the next minute. The ECU did AMAZING, car ran flawless with no hiccups, and adapted to the weather changes! In our qualifying run we managed to hit sub 1:50s on old hankook tds( that I drifted on ooops) Qualifying first on the grid, on our time attack session we put on new tds, and we actually lost 1/2 second but was still laying down 1:49s. We didn't have enough time to scrub the new tires in. Back in the pitts we bleed the brakes again, checked for loose bolts, adjusted the splitter, adjusted tire pressure, and crossed my fingers again. Nxt time attack session, we were VERY close to 1:48s, Will (driver) said he made two small mistakes losing a bit more than 1 second but still laying down anther mid/low 1:49. We believe we hit the car's limit and seeing it potential of doing 1:48. We ended up winning our rear wheel drive mod class, and Fris from Lucky7 racing got 2nd place! It was definitely a good podium finish for rotarys today. We won three awards for 1st place rear wheel mod class, , Modified class overall champion, and FASTEST overall car of the day. The second fastest car was a GTR doing 1:50. Tasted shampagne, felt really good!! WHat a great day for the rx7 and rotary! First time in history an rx7 rotary has won MOD class in Redline time attack!!! On the way to KBBQ, we were already planning on what to do next to hit our target goal of 1:44 MINIMUM. The car is still in very early stage of development and we have about 30 days before the next round. Some key things we will be doing is 500whp, e85, flex fuel sensor, better front aero, more rear downforce, new clutch that can hold power, utilizing the intercooler/radiator for more downforce, and a couple small things. stay tuned! |
6 Attachment(s)
|
Very Cool Dan!!! Loving the Updates!!
|
Quick updates
E85 flex fuel sensor arrived- I will be wiring that into the adaptronic pnp through one of the speed sensor pins Injector dynamics 2000s secondarys/kg rail- installing the new injectors this week AEM 380lph inline pump, surge tank, -8an, -6an braided lines, bulkhead fittings all in the works! Action clutch is onboard with us now! we will be using their IRON man series race clutch! I should be able see the dyno this week or next week. Im estimating 500-550whp at the same boost level on 80-85% ethanol!! We will be doing some more track testing at Streets of willow this week. Our PB time at streets is a very low 1:19 clockwise config. We should be hitting 1:18s with the coilovers revalved thanks to Gears racing! We will also be selling team race shirts soon and proceeds are going torwards breast cancer charity!!!! |
1 Attachment(s)
|
| All times are GMT -5. The time now is 07:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands