Banzai Racing 20B GT42RS 93 FD
 

This is one of our shop cars that we work on when we get a chance. A year ago I decided that is was time for a 20B. The core engine arrived on 8-27-08, yesterday (8-26-09) we fired it up for the first time. We did not plan it this way, it just happened.

So on to the good stuff. We were lucky enough to source a D series engine (D303)for the project. We rebuilt the engine with an aggressive streetport. It required two new housings so we opted for two brand new 20B housings, just to keep the numbering correct. Exhaust sleeves have all been swapped for FD's. The Exedy twin disc clutch was used to get the power to the trans.

http://www.banzai-racing.com/20B/Eng..._on_pallet.JPG

Complete 20B breakdown: http://www.banzai-racing.com/20B_engine_breakdown.htm

http://www.banzai-racing.com/20B/Eng...uild_front.jpg

http://www.banzai-racing.com/20B/Eng...ni_lg-blk3.jpg

Complete Rebuild: http://www.banzai-racing.com/20B_rebuild.htm

We decided it was a perfect time to strip the engine bay and have it repainted. So we delayed the project by a few weeks so that this could be done:

http://www.banzai-racing.com/20B/E-B...ebay_after.jpg

Engine bay shots through the project: http://www.banzai-racing.com/20B_eng...transition.htm

For the turbo we went with the Garrett GT42RS (102mm) with the Tial 1.01 v-band turbine housing. We also used the Tial 60mm wastegate.

http://www.banzai-racing.com/20B/Par...2RS_turbo3.jpg

More pics of turbo, wastegate, manifold, and downpipe: http://www.banzai-racing.com/20B_installation3.htm

Engine management is the Microtech LT-16 (one of the very first in the country when we bought it). We designed a custom adapter harness to make it plug and play with the hybrid Cosmo/FD engine harness that we made. This made it much simpler to keep the speedo, wipers, fan relays, etc all functioning normally. Honestly when looking in the engine bay it looks like there is a OEM engine harness, that is because it is.

http://www.banzai-racing.com/20B/Par...er_harness.jpg


There was lots and lots of custom piping, bracketry, etc. to make for the project. We made a custom Greddy elbow to mate to the 20B TB. We used a custom mounted Koyo N-flow and dual 25 row oil coolers to keep the fluids cool. Every vacuum, fuel, oil coolant line is all ss braided.

http://www.banzai-racing.com/20B/Par..._20b_elbow.jpg

Now we get to start driving it and putting some break in miles on it. The initial short trips have already been a blast, the car spins the tires with any blip of the throttle.

http://www.banzai-racing.com/20B/20B_ebay_08-26-09.jpg

The entire year long project can be seen on our website : http://www.banzai-racing.com/20B_installation3.htm

Video of the car running: Maiden voyage http://www.banzai-racing.com/20B/ban...den_voyage.mpg

Video of exhaust: Still burning off lots of crap http://www.banzai-racing.com/20B/ban...aust_sound.MPG

Wow. Looks great. I just love how the 20B looks snuggled into an FD chassis. Great work as usual!!

just amazing!!! you guys do awesome work congrats!

WOW very cool. Im glad you repainted the engine bay to. That motor deserves a clean home.

wow! that is so nice....I wish I had the patients for a 20b project and my pockets were deep enough for a build like this.

Awesome Work.. You guys Rock...

Unbelievable. Best conversion I have seen yet. Looks factory..

A few questions.. are you using a undertray and what subframe are you using. Also did you make the turbo manifold? Any pics of it?

Can someone hand me a towel... I just came.

It would look better if it had A/C and power steering!







NO I'm just joking


That car is BAS ASS!!!

That was exactly what we thought.


Right now there is not an undertray, I will be designing one, it is a very short distance from the IC to the radiator.

http://www.banzai-racing.com/20B/20B...w_08-25-09.jpg

We used the Hinson subframe, but we had it e-coated for durability, also installed a de-powered steering rack from Maval

http://www.banzai-racing.com/20B/Eng..._installed.jpg

We designed the manifold, using the RB flange and then had it Jet-Hot ceramic coated.

http://www.banzai-racing.com/20B/Par...installed1.jpg


There are pictures of everything on our site.

If my engine ever blows...I'm sending it to you :D

Awesome work :icon_tup:

That is absolutely beautiful work. Amazing that it can look so cleanly done, without a mess of wires and vacuum lines going everywhere.

Extremely impressive work!

Thanks for all the compliments. The goal was to make it as "factory" looking as possible, so that someone that doesn't know RX7's wouldn't know that this wasn't the original engine. Obviosly it is a little more shiny.

Very nice work.....

Here are the side views of the engine bay. All nipples on the UIM and LIM were removed, tapped and plugged or a fitting installed.

..and for those tht have asked via PM, it idles at a smooth 900rpm and is currently pulling 16" vacuum

http://www.banzai-racing.com/20B/20B...e_08-26-09.jpg

http://www.banzai-racing.com/20B/20B...e_08-26-09.jpg

That is beautiful. Love the fresh paint in the 'bay, looks like it's still wet :) Looks kind of funny, the shock tower nuts are painted too :tonque: What are you expecting for power/torque on this thing? Running pump fuel? Water injection? Please post your dyno chart when you get it!

I am making a custom strut tower bar, so those nuts will not be there much longer, no need to remove them until the bar is done.

Yes it is running pump gas, we will see what it makes when the engine has enough break-in miles. I don't ever make predictions on power. I will tune it to 15psi first and see what it puts down, then think about installing AI.

Our 91 vert, the little sister to this has the Cosmo 13b-re with a GT35R it makes 435rwhp @15psi (pump fuel) on a Mustang Dyno. This should make more then that :)

holy bajeebus that's sweet.

I'm gonna have to show people this thread when they ask who built my engine, this is truly impressive. I'm anxious to see what it's capable of at 15psi alone.

Very nice work, probably the nicest 20b engine bay I've seen.

That is one hell of an engine bay, that's the outcome when we take our time to get project done, do it right the first time, it is truely a piece of art.
Khris

good job. wish i had deeeeeeeppppp pockets:(

:bowdown:

If I am ever ready to do a 20B, I will be getting it done by you guys. Awsome work:icon_tup:

So, I take it there's no air filter in the plans? Nice job BTW. Clean ass install! It appears to be about 6 inches further forward that other installs I've seen. Is that true or just an optical illusion??