Which kits are plug N play?
 

No cutting, splicing, soldering of wires and finding my own connectors and water tank. I'm looking for everything included with instrcutions. Can someone tell me wheich kits to look at?

learn how to cut, solder and splice????

^ booo!

ok, I can solder and heat shrink, but i'd prefer a cleaner setup. So I guess which kits are complete (pump, hoses, nozzles, tank, etc)?

I've gone to alky, Rice and coolmist (I think it is) and none of them show what each kit looks like, what's included or anything. Basically a main page and a link to a forum.

Snow or AEM

http://www.aquamist.co.uk/vbulletin/...ead.php?t=1623

and going through howerton engeneering they will get you a kit and thier tank to suit your needs but there is NO kit that is easily plug and play this one has bare minimum cut/splice for ease to the end user. and one of the best kits out there short of full control from your aftermarket EMS.

z

infact after power and ground only 3 wires to tap into
1. DIM
2/3. INJECTOR POS/NEG

Thanks guys - I like the Snow Max and the Aquamist HFS-3.

The Aquamist seemed to be plug n play untill I read the forum which looks like I may need the summer add on module. I can't find the price for the kit itself though.

on the HFS-3 you do not need the summer you can just tap into the secondary inj signal then turn down the inj duty cycle turn on time and itll inj when the secondaries come on line matching inj duty cycle.... or the summer but you can actually run the summer without even using the hfs-3 for a even cheaper setup without gauge just match the inj to how much you want to use and the summer will drive the HSV to equal inj duty cycle.

for pricing go to howerton engeneerings website for ordering in the US.

z

on the summer you can only get that directly from aquamist FYI built to order.