ai "race valve"
 

https://usrallyteam.com/index.php?ma...oducts_id=2629

was wondering if anyone has used one of these before? picked one up, in the middle wiring it up.
I current have my haltech controlling a SSR to duty cycle pump and after some reading and talking to some people i learned its not the best way to do it. they basically said turn the pump on and use a solenoid to control flow, and started searching and ran across the above raelce valve. almost looks just like a fuel injector!

haltech will now pulse SSR for the valve and ill use an output to turn on just a basic relay to turn on ai pump

o im also adding a pressure sensor to system along with the aem meth flow senssor (heard they suck lol)


@Howard Coleman @TeamRX8

interesting, no input to add other than if this is officially recognized and supported by SIRHC Labs then it has my interest. :suspect:

well scratch that, only handles 500cc :/

get more than one?

or get one from Aquamist:
1300cc-fast-acting-valve
1600cc-fast-acting-valve

was even looking at prometh solenoid?

You should pick the one that better fits your application. Other than max flow, also your pwm controller frequency.

Aquamist FAV: 25-50 Hz

Prometh Solenoid: 20-30 Hz

my haltech is going to control it, I ended up going with the prometh. spoke with Rodney there and was very helpful! a+ customer support

have mine for sale if anyone is interested, brand new unused