AEM Water/Meth Controller Mounting Solution Interest
 

I know a lot of us have been on the WM train and I'm sure a chunk of us are using the AEM v2 controller kit. I know that when I had to find a spot to mount my controller, the spots weren't all that obvious as there are no holes for mounting the controller and I'm sure that has frustrated a few. I have this idea for making a hold down bracket out of steel or aluminum if enough people were interested. I just got a mill and all the stuff to start throwing chips and would love a simple project like this as I already made hold down for my personal FD and would like to help out the community if at all possible. Costs would have to be calculated and sketches drawn out and hold downs would have to be perfected first of course which might take a while. Ideally cost would be 50 bucks or less depending on how complex this can get and how time consuming it could be.

How many people would be interested in a mounting solution for the AEM V2 controller?
Any ideas for locations I could measure out for specific fitment that anyone can think of?
Any features you would like to see?

Thanks for your time and consideration!

I am curious to see what others think. I ended up not mounting mine. Keeping it "loose" and keeping it my driver's seat rear pocket. I have enough slack to use it while driving it not it stays out of sight in the pocket.

That'd be niice I've shamefully stuffed it up behind the passenger side kickpanels(RHD) I pretty much can't access it and rely on it to run consistently/hear the pump buzz.... If my wife is with me she could hold it... but I think that'd ruin her opinion of not only me but the car :lol:
Something like the commander holder might be cool? Maybe an A pillar mount?

Okay, so life kinda got in the way of a bunch of stuff and summer hit and you all know how it goes.
Here is what I was able to come up with

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

It utilizes counter bored holes so allen head bolts fit in to the holes and don't disrupt anything behind the controller. Those hex head 1/4 inch bolts are all that I had laying around.
So this is it. I'd sell them for 40 bucks a piece. Keep in mind, this is just the bracket and the controller is not included! The only downside is that my dad scrapped my drawings so I'll have to re-sketch everything to start making them again. I also have to order the materials for the first batch so the first couple my take a week or two to make.

If you are interested, send me a private message and the details can be figured out from there.