sequential spark setting?
 

I plan to run 4 ign-1a coils with built in igniter that take falling edge trigger,
I already moved the jumpers and configured the coils,

what settings do I use in Coil Phasing options?

thnx in advance
tony

did you ever figure this out man?

I did figure them out, the coils worked great with microwreck, but sorry I ditched the ecu couple years ago I don't remember the settings

I'm finding that not even AEM knows how to make these things work.

Try to get a hold of Cody (EBTURBO). He's the AEM guru.

The original 30-1800 startup calibration settings mimic the stock ECU by firing the leading coils twice per engine rev… once for the front rotor (Coil1 output) and once for the rear rotor (think of the Coil6 settings as being ‘Coil1B’, the second time the Coil1 output fires due to wasted spark).

https://borgtechnology.files.wordpre...m-ignition.gif



When changing to a sequential coil setup, wire the Coil1 output to the front leading coil, add a new wire from the Coil4 pin to the rear leading coil, and configure the settings as shown. You can find the Ignition Phasing options by selecting Ignition>>Advanced Ignition>>Ignition Phasing. Your software version may not have a menu with a checkbox for each coil, go to Options>>Coil and select or de-select the ‘Active’ checkbox for each coil.

https://borgtechnology.files.wordpre...q-ignition.gif


Hope that helps,
-s-