Need a decent base map for AEM EMS v1
About to fire up my new setup hopefully this weekend and I need a decent base map. My modification list is as follows:
-Borg Warner S366 .91 a/r -HKS GT 60mm wastegate -Full Function Engineering Primary and Secondary rails -(2) ID1000s and (2) ID2000s -Aeromotive FPR -Bosch 044 pump in-tank -Greddy 2-row intercooler I have an AEM water injection kit that I plan on running but I'll install that before the tune, don't need that on a base map. Any other info I can give I will. |
Originally Posted by 2RotorsNaDream
(Post 11582451)
About to fire up my new setup hopefully this weekend and I need a decent base map. My modification list is as follows:
-Borg Warner S366 .91 a/r -HKS GT 60mm wastegate -Full Function Engineering Primary and Secondary rails -(2) ID1000s and (2) ID2000s -Aeromotive FPR -Bosch 044 pump in-tank -Greddy 2-row intercooler I have an AEM water injection kit that I plan on running but I'll install that before the tune, don't need that on a base map. Any other info I can give I will. EB Turbo |
This Would Only Be To Drive Around To Break In The Clutch And Make Sure Its Running Good Before I Go Get It Tuned. Starting From Scratch.
|
PM'd
|
I need the same thing. I am sending my ecu in for Revision B and will need a new starting point. I just need a base map to get it running and onto a trailer.
Setup: E85 Rebuilt Engine ~6k Miles Ago With Mild Street Port Garrett Hybrid Turbo (T4 1.15ar exhaust/60ar Compressor) V-Mount Intercooler With 3" Pipe Tial 50mm BOV Tial 44mm Waste Gate Custom Exhaust Manifold Full 3" Exhaust DP Back 850cc Primaries 1650cc Secondaries -8 Feed Lin -6 Return Walbro 460LPH Pump Aeromotive FPR @ 45psi Under Drive Kit |
Nevermind, I was able to get the original tune from the prior owner.
|
All times are GMT -5. The time now is 02:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands