Looking For A Map
 

Hey Guys,

I am looking for a map with a street port, T04z, 1000cc Primaries, and 2000cc Secondaries.

I am just looking for something to get my car running so I can get it on the trailer to take it to the turners.

I am also looking for a How-To on how to change the O2 input to an AEM wideband (5v)

Series 1? Series 2? Firmware version? I'm no expert but I think more info is needed.

Hahaha sorry,

It is a S1 but I am not sure the version, all I know is that its the most updated as I just got the ECU back from AEM.

the process to get a base map is pretty straight forward.

*Start with the stock twin map and adjust the entire fuel map based on the change in fuel (%). % stock 850 to 2000cc.
*You will also need to sync up the ecu with the stock timing.
*run through all the wizards as this will auto adjust most parameters for a base tune
*You might have to change the AFR the ECU will display to Gasoline. I know mine resets to something else when I wipe the ECU.


The Map lacks a lot when it comes to timing. ArghX can shine some light on that as he is well versed in the stock AEM maps.

Thank you ondabirdhouse.

My car already was tuned with my single turbo, I just added an xcessive LIM and change my injectors to 1000cc (from 680 primary) and 2200cc (From 1650 Secondary). I did start it on this map and think I cen get it on the trailer and to the tuner using my existing map.