Spark issues
I am having Coil igniter issues.
So I have had problems getting t1 and t2 to fire (stock ignition) so I tested the coils and plugs and they tested good. I then got a cheap igniter, same issue then the next day i could not get any spark out of both igniters. I tested the ecu trigger wires and got 0.01 0.01 0.50 I then tested the coil plugs and got: pin1 12v and pin2 10v :scratch: I then disconnected ecu trigger wires pins read the same. I was of the belief that the second pin at the coil should read 0 till it fires ??? I am using the s8 v14 base map on v14. Also the car was running on the leading plugs on my old igniter till I swapped it out |
I just used the override option with the coils, igniter and the trigger wires disconnected.
I got IGN1 10V, IGN2 2.32v, IGN3 0.84v |
How are the grounds looking?
|
all in order.
Been in contact with Mark should be sorted soon |
All times are GMT -5. The time now is 08:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands