Xcessive mani 2 center injector plugs... 1/4 NPT works!
So, after reading somewhere that the plugs provided by xcessive for the 2 center injector ports tend to find a way to pop out, I did a little brainstorming and test fit a 1/4 npt fitting I had laying around and found that it barely fit on the first thread.
So, I decided to tap the bottom portion of the 2 center injector ports and just plug them with 1/4 npt plugs. Worked like a charm! It did not damage any of the sealing surface so if I want to use 4 injectors in the future I just take the plugs out and done. :nod: Thoughts? |
|
update:
I'm going with an Elite LIM and did the same to it. 1/4 NPT tap to the 2 center injector ports. |
All times are GMT -5. The time now is 01:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands