RX7Club.com - Mazda RX7 Forum - Which wire for the resistor for the injectors

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - Which wire for the resistor for the injectors (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/wire-resistor-injectors-624585/)

robertwallace

02-17-07 09:15 AM

Which wire for the resistor for the injectors

I am fitting a kg parts secondary rail and 1600cc injectors. Does it mater which of the two wires leading to each injector clip I should put the resistor on?

Howard Coleman

02-17-07 10:41 AM

it does not matter which wire...

BlueTII

02-17-07 11:04 AM

We prefer to wire them in at the ECU, it saves you from soldering in your engine bay. Wires 4Z & 4X are secondaries, 4W & 4Y are primaries. It is a much less harsh environment inside the car for the resitors.

Howard Coleman

02-17-07 11:13 AM

good idea, one that i will use when i change my R to the proper ohms..

hc

cewrx7r1

02-17-07 11:25 AM

Quote:

Originally Posted by robertwallace

I am fitting a kg parts secondary rail and 1600cc injectors. Does it mater which of the two wires leading to each injector clip I should put the resistor on?

I suggest you read a book on basic DC (direct currect) and AC (alternating current)
theory. It will help you in the future.

All times are GMT -5. The time now is 08:37 PM.