Will not Run, need help!
Hey Guys, I really need some help. This is something different for you guys so ANY help is appreciated. I have a 13b-REW swapped into my 69' Chopped and Stretched VW Beetle. Has fuel, spark ( strong as hell ) will crank and start for maybe a second then dies. Ive deflooded it like 10 times, tried to pull start it, there is an issue somewhere. brand new MAP sensor, brand new power FC, power steering is removed, no OMP, no ac. brand new plugs. Im at a loss here. please help..
Sorry about the large pictures, i cannot figure out how to make them smallerhttps://cimg3.ibsrv.net/gimg/www.rx7...92b6ec4b8f.jpghttps://cimg4.ibsrv.net/gimg/www.rx7...4e4cb6fd45.png |
First off, that's a cool swap!
BIG one to start with - on the sensor check screen, PIM is showing reversed which means it isn't getting a signal from the MAP sensor. No MAP sensor, the car won't run for nothing, that's a primary input. It's something with the wiring to or from the MAP sensor. Dale |
There also appears to be something going on with the TPS values.
|
Originally Posted by K-Tune
(Post 12214863)
There also appears to be something going on with the TPS values.
Dale |
Hey thanks for that info!! Got the MAP and TPS all sorted out today, now starts and i can keep it going but you can tell its not too happy, as soon as you let off the gas it dies. So tomorrow im going to adjust the screw on the back of the TB and make it idle super high and slowly bring it down. Is there anything else maybe i can try? this is my only idea so far and im just about out of ideas... Thanks A TON for the help, this is why i love this community.
|
Love to see more pic! Looks like a really clean cool swap you have going
|
Originally Posted by Mikelivi91
(Post 12214997)
Love to see more pic! Looks like a really clean cool swap you have going
https://cimg7.ibsrv.net/gimg/www.rx7...4ec9390c4c.jpg https://cimg8.ibsrv.net/gimg/www.rx7...c670d596ae.jpg https://cimg9.ibsrv.net/gimg/www.rx7...779c14e31d.jpg |
[QUOTE=Mikelivi91;12214997]Love to see more pic! Looks like a really clean cool swap you have going[/QUOTE
Thanks man, spent a lot of time and money, blood and sweat on this one. 1400 lbs, should scoot. |
Man thats cool. Good luck to you in finishing it up... At 1400lbs your looking at a screamer lol
|
Originally Posted by Mikelivi91
(Post 12215020)
Man thats cool. Good luck to you in finishing it up... At 1400lbs your looking at a screamer lol
|
What AFR's are you getting? Might be running too lean (or too rich). Also make sure TPS is calibrated correctly.
|
All times are GMT -5. The time now is 12:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands