Who has reinstalled a cat after running full exhaust
I love my car after owning it for 7 years but I would like like it to be less in 2 ways.
Less smelly and a little more quiet, (every cop for 3 blocks to knows I,m there) I would like to hear from anyone who has run a full exhaust that installed a cat and what their experiences are,thanks,Carl. |
I thought about switching i have a full exhaust and i think is loud. But i rather spend the money and get my car running right first. Think it depends on the cat back too dont think the cat will make a huge difference with a cat back like a apexi n1:)
|
The smell, I can understand...
But you're running a Greddy SP. I'm running the RB duals on an open, and it is very quiet unless I get on it. Everyone I talk to says I have the best sounding exhaust they've ever heard. I wish I could hear it at WOT from the back; too bad noone else is allowed to drive it :( |
i did that, i ran full exhaust, bonez mp/dp and greddy ti and it was fucking loud!
|
Well I heard a resonated midpipe at idle and it gave me the idea....the Rx7 store sells them for $250 their hi flow cats $100 more.
Someone chime in who has fitted a high flow cat to a open exhaust and tell me what if it will hit my goals of getting rid of the smell and quieting things down a bit. C. |
buy a metalic substrate cat and weld it in either your mp or a resonated mp. Its like 150 bux for just a core. More flow than normal cats and less smell.
BTW, metalic cats last longer and dont require an airpump |
Armen, what is the link to that mettalit cat thing you told me about that you can weld?
|
got knightsports full exhaust system titanium catback with metalit catalyzer..slightly louder than stock and the power it gives is amazing
|
Here is an expensive one.....http://www.suprasport.com/RT-High-Fl...t_p_54-17.html
Heres some others. Not sure if its better or worse.. http://www.hottexhaust.com/search_re...2&txtCatName=2 |
I've got a Bonez midpipe for sale. Great shape, with a high-flow cat. Asking $150
http://www.usfbullshit.com/UserData/...0817387219.jpg http://www.usfbullshit.com/UserData/...0810452687.jpg |
i have a full turbo back and i just put the cat on when i need to pass emissions. i dont get hassled too much about the noise cause i put in a silencer and tuned it to a low tone. its nice. invest in one it still sounds dope
|
Troux does the catback take most of the smell out?what about sound,Isee you have a Greddy sp too.
|
Originally Posted by mp5
(Post 7581870)
Troux does the catback take most of the smell out?what about sound,Isee you have a Greddy sp too.
|
i had a bonez midpipe customized to have a magnaflow resonator and a metal core high flow cat. worked great for sound and smell!
i have since moved to a smb 3.5" one and have the custom one for sale. pm me if interested |
SMB sells a mid pipe that has both a metal cat and a muffler in it. I just installed mine after running the RX7 store mid pipe with the Magnaflow muffler. The performance and noise levels are similar with less stink.
I also have a mid pipe that I had installed a metal cat onto (w/o a muffler or resonator). That definitely killed most of the stink and flowed almost identically to the straight mid pipe according to the butt dyno. I also tried a Bonez high flow cat. Performance did suffer slightly with that setup according to the butt dyno. Spool up with a bit slower but it was quieter and smelled much less. After running an open exhaust for so long, the most similar setup for me was to run the SMB. |
Originally Posted by gracer7-rx7
(Post 7583202)
SMB sells a mid pipe that has both a metal cat and a muffler in it. I just installed mine after running the RX7 store mid pipe with the Magnaflow muffler. The performance and noise levels are similar with less stink.
I also have a mid pipe that I had installed a metal cat onto (w/o a muffler or resonator). That definitely killed most of the stink and flowed almost identically to the straight mid pipe according to the butt dyno. I also tried a Bonez high flow cat. Performance did suffer slightly with that setup according to the butt dyno. Spool up with a bit slower but it was quieter and smelled much less. After running an open exhaust for so long, the most similar setup for me was to run the SMB. |
Only on the butt dyno. :)
Meaning I never dyno'ed it. Going by how it felt on the street. It feels close enough that I didn't notice a big difference on my setup. I'm running ~10 PSI on 99 twins with a streetport fwiw. I don't know your setup so I can't say that your results will be the same but I have been very satisfied with all of the above exhaust setups for different reasons. |
I TOTALLY needed to read this. My wife won't RIDE in my RX7 because of the noise and especially the smell. Not having an airpump, I had read mixed reviews on adding a cat. I need to get a metallic cat and move on.
Trev |
You have an Greddy SP and you want it to be more quiet?? Thats about as quiet as it gets. Just throw on a resonated midpipe and it will be really quiet.
|
I threw on a borla xr-1 and a metalic cat, it's still loud, but it doesn't stink anymore! (With a RSR Racing Beat Dual Tip)
|
Originally Posted by mp5
(Post 7581870)
Troux does the catback take most of the smell out?what about sound,Isee you have a Greddy sp too.
BTW, the Greddy SP is for sale, too. As David said, the Greddy SP is about as quiet an exhaust as you can get. ;) |
All times are GMT -5. The time now is 01:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands