RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   WHining noise during acceleration :( (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/whining-noise-during-acceleration-303179/)

ejmack1 05-06-04 10:35 AM

WHining noise during acceleration :(
 
Any ideas what this could come from....?

I let the clutch in and it stops... if im just cruising its not noticeable at all...

Its a rebuilt tranny, and everything shifts perfectly with it....

Throwout bearing maybe?

RX7Wishing 05-06-04 10:37 AM

does it do it at idle? When you push the clutch in at idle does it go away? If so 99.9% its the TB.

Gargamel 05-06-04 10:52 AM

throw out bearing

ejmack1 05-06-04 11:08 AM

no only when accelerating...

Gargamel 05-06-04 11:31 AM

it's the throw out bearing you hippy!

gnx7 05-06-04 12:53 PM

My car does the same (FC) and sounds like a gear drive when I'm accelerating. Been like this for 30K miles as I didn't feel like pulling the tranny for this. Hasn't affected operation at all.... just annoying. However note that it could seize at any time.

Either throwout bearing or an internal bearing on the input shaft.

If your tranny is rebuilt I would take it back to them and say WTF.

-GNX7

ejmack1 05-06-04 01:06 PM

??? why would I take it back to them, I doubt its the tranny at all.

gnobesav 05-06-04 01:18 PM

[obligatory smartass remark]
Sounds like your turbo is spooling, that's good!
[/obligatory smartass remark]

Really though, I agree with t/o bearing.

Gargamel 05-06-04 01:19 PM

Drop the tranny and put a new throw out bearing in you hippy!

r_ed_line53 05-06-04 05:12 PM

throw-out-bearing
 
if it was installed by someone else - have them re-do it. if you did urself... have fun


see ya,

car 53:cool:

RotorJoe 05-06-04 06:57 PM

From the topic, I was going to say its just your turbos spooling.:-)

But it sounds like a pilot or throw out bearing.

ejmack1 05-06-04 07:52 PM


Originally posted by Gargamel
Drop the tranny and put a new throw out bearing in you hippy!
that would take me what... all of 30 minutes....

ejmack1 05-06-04 07:53 PM

Re: throw-out-bearing
 

Originally posted by r_ed_line53
if it was installed by someone else - have them re-do it. if you did urself... have fun


see ya,

car 53:cool:

no one touches my car but me... ;)

except if a friend is over helpin :D

JDHuegel where yah at!!!!!

93silver3rd 05-06-04 08:01 PM

haha gargamel

ejmack1 05-07-04 12:48 AM

hmmmm its seems to be the loudest in third gear

kamaal27 05-07-04 01:05 AM

Throw out bearing
 
ok so that what it is, i have the same problem here..when the car is ideling it makes a weird noise, but if i slam the clutch all da way down it stops...tell you what that noise sure is hella annoying...

Gargamel 05-07-04 09:05 AM


Originally posted by ejmack1
that would take me what... all of 30 minutes....
exactly........ so get on the ball.


hippy

jdhuegel1 05-07-04 11:17 AM

Re: Re: throw-out-bearing
 

Originally posted by ejmack1

except if a friend is over helpin :D

JDHuegel where yah at!!!!!

Reporting, as requested.

I'd also agree about the bearing. Bring it by, I can give you the FPR plate I made for ya too. :D

Do you have any tranny or diff braces? They can cause some abnormal whine and noise..

ejmack1 05-07-04 12:54 PM

Re: Re: Re: throw-out-bearing
 

Originally posted by jdhuegel1
Reporting, as requested.

I'd also agree about the bearing. Bring it by, I can give you the FPR plate I made for ya too. :D

Do you have any tranny or diff braces? They can cause some abnormal whine and noise..

we'll see if the fuckin thing can make it :)


All times are GMT -5. The time now is 01:55 PM.


© 2024 MH Sub I, LLC dba Internet Brands