RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   where to get new O-rings for injectors (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/where-get-new-o-rings-injectors-32744/)

silver93 11-15-01 09:36 PM

where to get new O-rings for injectors
 
I need to put new O-rings in all 4 injectors before i reinstall them (after cleaning)

where can i get the o-rings other than through the dealer?

Flybye 11-15-01 10:52 PM

Any injector cleaning shop should have them, I think autoparts stores would have them, too. have you tried Napa? I think they carry a wide selection of O-rings.

Sled Driver 11-15-01 11:37 PM

MAZDATRIX
 
That's where I got a set. They stock the Genuine Mazda part. Otherwise I would go to your Mazda dealer.
They are a unique size, not common. I tried a generic set from the shop that cleaned my injectors, but they leaked.
I had to removed & reinstalled all four injectors 3 times till I got it right. Save time & hassle, get Mazda o-rings. Use "Marvel Mystery Oil" or engine oil when you install them.
Good Luck!

silver93 11-16-01 06:16 AM

Thanks, i'll try napa first
the last thing i want to do is have to take everything apart again!
what a PITA!

Flybye 11-16-01 06:45 AM

Try these guys:
http://www.injector.com/

They might be able to ship you out a set.

silver93 11-16-01 11:15 PM

well, napa didn;t have 'em/couldn;t get 'em -

so all 8 at mazda cost me, with discount:

$76!!!

G(&*^#*&^$*QW&^$#*&!!!!!


oh well.


All times are GMT -5. The time now is 03:09 AM.


© 2024 MH Sub I, LLC dba Internet Brands