Where do I get pills?
 

I have a 93 and about to try to replace the vacume lines. I would like to know if I need the pills for a 93 and where do I get them to replace them?

Also where to get a turbo control solenoid?

Thanks

Call Ray at Malloy Mazda - 888-533-3400. He'll know just what you're talking about on the pills and get you the right ones. I think they're pretty cheap too.

Turbo control solenoid, get one used.

Dale

I make my pills , when I ran seq the pattern was 10- 9 3/4 -10 . It was so fast the gage barely moved . I just adjusted the hole sizes with numbered drills .You can make the pills by cutting a shank out of a brass bolt. The brass drills easer then a steel bolt . Easy as that .

I used Holley carburetor jets.
Sorry, cannot recall exact size.

search under (boost orifice) or (boost pills)

The stock pill sizes are:

Pre-control (longer hose) .059"
Wastegate (shorter hose) .064"

Holley Jet No. and Drill Size (in thousands of inch) are listed
below. 3 columns of data is shown. The first number in each column is
the Holley jet size (i.e., 40) and the corresponding orifice size is
shown (i.e., .040) in inches.

40 .040 | 61 .060 | 81 .093
41 .041 | 62 .061 | 82 .093
42 .042 | 63 .062 | 83 .094
43 .043 | 64 .064 | 84 .099
44 .044 | 65 .065 | 85 .100
45 .045 | 66 .066 | 86 .101
47 .047 | 67 .068 | 87 .103
48 .048 | 68 .069 | 88 .104
49 .048 | 69 .070 | 89 .104
50 .049 | 70 .073 | 90 .104
51 .050 | 71 .076 | 91 .105
52 .052 | 72 .079 | 92 .105
53 .052 | 73 .079 | 93 .105
54 .053 | 74 .081 | 94 .108
55 .054 | 75 .082 | 95 .118
56 .055 | 76 .084 | 96 .118
57 .056 | 77 .086 | 97 .125
58 .057 | 78 .089 | 98 .125
59 .058 | 79 .091 | 99 .125
60 .060 | 80 .093 | 100 .128

Thanks guys for all the info.

This thread title is misleading.