what's the max speed on 1st gear can a 3rd gen take?
#3
Full Member
Join Date: Mar 2001
Location: Huntington Beach, CA, USA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
If you have a manual transmission (US model):
First gear has a 3.483 ratio.
The final drive is a 4.10 ratio
Stock tires are 225/50/16, so the circumference is 78.05 inches
Redline is 8,000 RPM
Sooooo. 8,000 RPM / 3.483 / 4.10 X 78.05 in. = 43724.6 in./min.
There are 63360 inches in 1 mile and 60 min per hour, soooo.
43724.6 / 63360 X 60 = 41.4 miles per hour.
If you have an automatic transmission, a different redline, or tire sizes different than stock, this will change.
HTH.
First gear has a 3.483 ratio.
The final drive is a 4.10 ratio
Stock tires are 225/50/16, so the circumference is 78.05 inches
Redline is 8,000 RPM
Sooooo. 8,000 RPM / 3.483 / 4.10 X 78.05 in. = 43724.6 in./min.
There are 63360 inches in 1 mile and 60 min per hour, soooo.
43724.6 / 63360 X 60 = 41.4 miles per hour.
If you have an automatic transmission, a different redline, or tire sizes different than stock, this will change.
HTH.
#4
i think he meant what's best/safest way to launch your car without doing damage
it ain't polite to dis DK, dude ( did i spell that correctly ) people have to begin someplace, whether it's riding on the bench, the road, the track, or yo mama
it ain't polite to dis DK, dude ( did i spell that correctly ) people have to begin someplace, whether it's riding on the bench, the road, the track, or yo mama
#6
Senior Member
about 40mph in a stock 5 speed:
http://www.rx7.com/cgi-local/3catalog.cgi?cat=2&part=6
you can go about 72mph in 2nd which is perfect for auto-x
http://www.rx7.com/cgi-local/3catalog.cgi?cat=2&part=6
you can go about 72mph in 2nd which is perfect for auto-x
#7
What's your point ?
Join Date: Feb 2001
Location: Gainesville, Fla.
Posts: 3,573
Likes: 0
Received 0 Likes
on
0 Posts
Judging by his screen name
All I can say is ......if you don't have the stock computer (rev limiter)
then why not just put it in 1st gear and run it on up the ole speedo till it won't go any higher and remember that number and grab another gear and keep on going till you find out the limits on all the gears. I'd sure like to know myself....just don't want to waste my motor to find out.
then why not just put it in 1st gear and run it on up the ole speedo till it won't go any higher and remember that number and grab another gear and keep on going till you find out the limits on all the gears. I'd sure like to know myself....just don't want to waste my motor to find out.
Trending Topics
#9
Lawn Ornament
see how much she'll take before she goes pop, then repeat in every gear until you have a nice chart of max engine RPM per gear, just what every FD owner wants.... Do it for us man
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM