RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   This is whats done to the car.... whats next? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/whats-done-car-whats-next-471433/)

Ranger Yi 10-11-05 03:00 AM

This is whats done to the car.... whats next?
 
M2 Downpipe
M2 Carbon fiber intake
Greddy catback
Power FC and handheld
turbotimer
Koyo large radiator
new injectors
trans rebuild
new clutch
tokico adjustable suspension
R1 front shock tower brace
R1 right side oil cooler
Stainless Steel brake lines and clutch line
Silicon hose for all boost and vacuum lines

bcty 10-11-05 03:14 AM

single conversion
or more fuel and booooooooost

FdWannaBePt2 10-11-05 03:27 AM

how bout a V-mount or some kind of intercooler upgrade

Adrian Knack 10-11-05 05:37 AM

Hiflow CAT
Intercooler
Boost Controller (eg. GReaddy Profec B II)
Swaybars (Anti-SwayBars I think you might call them in the US)
Rear Strut Brace

Cheers

dgeesaman 10-11-05 07:01 AM

suspension bushings
tires

DaleClark 10-11-05 08:01 AM

Leave it as-is and enjoy! That's a nice setup just like that. Maybe a good stock mount IC.

I'm with Dave on tires and bushings, though.

Dale

Sgtblue 10-11-05 08:15 AM


Originally Posted by Ranger Yi
This is what's done to the car.....what's next?


A big grin on your face after finding a nice open twisty road?

Ranger Yi 10-11-05 11:20 AM

i have pretty good tires on the car.. potenza SO2's... and theres a rear strut already forgot that...doesn't the PFC w/commander control the boost? what about a mid pipe?

dgeesaman 10-11-05 11:36 AM

The PFC controls boost fine, as long as youre running near stock levels with mild mods. I don't recommend a midpipe - a high flow cat works well enough.

I think the savings account mod is the best bang for the buck. Especially in case something goes bang.

What are your goals for this car? Just adding stuff for the sake of adding it is the short road to future problems.

Dave

Ranger Yi 10-11-05 11:45 AM

im not looking for too much power. im happy with the power it has now.. just want to make the car as reliable as possible.. Can someone make a Sticky of monthly, quartly, 6 month and yearly maintenance? just so i know at what miles and stuff to do what services on the car

dgeesaman 10-11-05 11:58 AM

For reliability, then consider:
- Stock mount intercooler
- Good tuning
- 2nd Gen thermoswitch
- HPD events

Maintenance:
- new radiator hoses and coolant hoses (I figure every 10 years is fine)
- new fuel filter (I do every other year, but that's not much mileage - others suggest 15k)
- coolant flush annually
- engine wiring harness (if you have $800 and you've already pulled the UIM and fuel rail - they seem to last about 100k)
- new coolant caps (every ten years)
- bleed brakes annually
- air filter every 10k
- Tires every 5 years or when there is 25% good tread left (I don't believe in using tires to their legal limit)
- New battery every 5 years

The turbo timer is unnecessary IMO. You've got most all of the reliability mods covered. If you want reliability, then more power mods will complicate things or reduce engine life. Midpipe may require boost control or wastegate porting. Much larger intercoolers are for much higher power.

Put the rest of the money in the bank. Save it for better things than unneeded performance mods. Trust me, save that money.

Dave

oorx7 10-11-05 12:47 PM


Originally Posted by dgeesaman
- 2nd Gen thermoswitch


Do you think this is still neccessary if you have a Power FC?
Please explain.

Brandon

dgeesaman 10-11-05 12:54 PM


Originally Posted by oorx7
Do you think this is still neccessary if you have a Power FC?
Please explain.

Brandon

Good point, I'm not sure. Does the Power FC allow programming of the fans independently of the thermoswitch event? Does it even read the thermoswitch?

Dave

Ranger Yi 10-11-05 01:42 PM

my car is currently running 12-13 psi on both turbos.. and i want to lower the boost but i dont ahve the power fc/ commander manuel.. but besides that point..

what intercooler do you guys recommend.. Whats a stock mount intercooler? im clueless..

dgeesaman 10-11-05 02:55 PM

A stock mount means it fits in the same arrangement and space used by the stock intercooler. By making it thicker/better, an aftermarket SMIC does a better job cooling the intake air. You can also lower boost by swapping in a slightly larger boost pill in the wastegate line.

But it won't allow for the same boost levels as a v-mount or front mount intercooler. Vmount and FMICs involve moving things around behind the bumper to compensate for the size. So the mounting plus the intercooler itself will easily run over $1000

My 0.02 is that you can take your time and really learn what these things offer before sinking the $$.

Dave

Ranger Yi 10-11-05 03:37 PM

so the stock mount iC does not mount in the front of the car right?.. i wont have the cool IC look?

BoostFrenzy 10-11-05 03:43 PM


Originally Posted by Ranger Yi
so the stock mount iC does not mount in the front of the car right?.. i wont have the cool IC look?

the cool IC look?

wtf

1QWIK7 10-11-05 03:51 PM

haha

TwinTurbo93 10-11-05 04:19 PM


Originally Posted by dgeesaman
Good point, I'm not sure. Does the Power FC allow programming of the fans independently of the thermoswitch event? Does it even read the thermoswitch?

Dave

I'm not quiet sure what you mean by programming the fans independently but, you can program the PFC to switch on the fans before so you can run cooler than w/stock ECU.

importrx7 10-11-05 04:30 PM


Originally Posted by dgeesaman
Good point, I'm not sure. Does the Power FC allow programming of the fans independently of the thermoswitch event? Does it even read the thermoswitch?

Dave

Yes you can set them to whatever temp you want mine come on at 87'C


All times are GMT -5. The time now is 03:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands