RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   What Turbo Is This ???????????? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/what-turbo-274606/)

Power_Put 02-22-04 01:58 PM

What Turbo Is This ????????????
 
SO THIS IS MY NEW EXPERIMENT I BLEW MY SECOND TURBO AND THE REPAIRS ARE TO MUCH ($$$) SO I DICIDED TO PURCHASE A SECOND HAND TURBO OF AN FC3S THE EXAUST MANIFOLD FITTED EXACT AND SO DID THE TURBO BUT IM NOT SHOURE ABOUT THE CABABILITIES OF THE TURBO AND DONT KNOW THE VERSION OF THE TURBO

CAN SOMEONE IDENTIFY THE MODEL OF THE TURBO AND CAN SOMEONE TELL ME IF THE TURBO FLOWS MORE THAN THE STOCK TWINS??

HOW MUCH CAN I BOOST THE TURBO

PICS ARE COMIN

Power_Put 02-22-04 02:03 PM

FC TURBO FRONT PIC
 
GOOD CONDITION FOR KNOW

rynberg 02-22-04 02:12 PM

????

So did you install the factory single turbo from a Turbo II on your FD or an aftermarket single turbo? If it's a factory turbo, you just lost quite a bit of power, and if it's aftermarket, you will have to be careful as it may flow more than the stock twins.

Mounting a completely unknown turbo may NOT have been the smartest thing you could do....

Power_Put 02-22-04 02:14 PM

FC TURBO
 
FC TURBO

Power_Put 02-22-04 02:25 PM

I KNOW!!!!!!!!

BUT ITS ONLY FOR CRUISING ILL BE GETTING A KIT FROM JASON NEAR FUTURE T78 MAYBEE

MY MODS ARE :

POWER FC
POWER FC BOOST KIT
COMMANDER
DENSO PUMP
FUEL REGULATOR
FRONT MOUNT INTERCOOLER
SINGLE TURBO ???
DOWN PIPE
MIDE PIPE
PE 2 CAT BACK
REMOVE DUBBLE THROUTLE
GREDDY A/R METER

Power_Put 02-22-04 02:35 PM

PICS2

Power_Put 02-22-04 02:46 PM

the fc3s might be less powerfull in standard trim but i assumed that the fc has smaller injectors smaller inlets, exausts ports havier rotors, slower engine management. less coils, drivetrain loss etc

so i m only assuming that with my mods it should spool faster and keep high rev high boost pattern

by the way i didnt mention my other mods
street ported and exaust ported
3mm seals

what do you think????????

fd3s_rx7 02-22-04 03:16 PM

why not buy my FD3S set for 500.00. 40k on it since rebuilt.
pm me if interested..

TwinTriangles 02-22-04 03:52 PM

Is that A series 4 turbo ?

PhatManBUD 02-22-04 03:57 PM

its off a vovlo C240 intercooled turbo, ive seem em, good for 8 lbs of boost

jimlab 02-22-04 04:09 PM


Originally posted by Power_Put
what do you think????????
I think it was about time you remembered you had the Caps Lock key on...

As far as your turbo, you should probably be asking this in the 2nd gen. forum, since the HT18S-2S is the stock turbo for the Turbo II as far as I know.

Power_Put 02-22-04 05:35 PM

you tell me eh cos i dont know does it flow better or what its of a rotarty 13b for shoure but dont know what series or model or bhp??????
whould it give me 300+ !!!!!!!!!!

rynberg 02-22-04 05:43 PM

It's a stock Turbo II turbo. That means it will make around 200 hp on your car, compared to 255 with the stock twins.

Power_Put 02-22-04 05:47 PM

but i have other mods like i stated before

DaiOni 02-22-04 06:12 PM

reading a recent boost-up special in a japanese magazine, they seemed to be able to get 350-ish hp out of one of these turbos (I'm at work, so I don't have the exact numbers).

You do appear to have the mods to push it quite a bit

but yeah, wouldn't have done that myself...

Power_Put 02-22-04 06:16 PM

thats more like it, DaiOni see if you could throw some info for me and thanks in advance

Ripzta 02-22-04 08:57 PM

On my friends Toyota Supra his secondary turbo is high flowed not the primary i think. Because he said he is only boosting the secondary to 16psi and primary to 10psi using a manual boost controller. Is this possible to do on an FD? I think he trying to keep the fast spooling primary to stay and have more grunt with the secondary when it kicks in. Oh yeh, he's still using sequential.

spekdah 02-22-04 09:27 PM

more to the point , Why are you on the net at work? shouldn't you be working? (:

Power_Put 02-23-04 01:47 AM

out of subject and thanks for your help guys

Power_Put 02-23-04 01:49 AM

pics

DeaconFrost 02-23-04 03:27 AM


Originally posted by Ripzta
On my friends Toyota Supra his secondary turbo is high flowed not the primary i think. Because he said he is only boosting the secondary to 16psi and primary to 10psi using a manual boost controller. Is this possible to do on an FD? I think he trying to keep the fast spooling primary to stay and have more grunt with the secondary when it kicks in. Oh yeh, he's still using sequential.
Sure is. Except you will need two manual boost controllers for it.

DaiOni 02-23-04 04:11 AM


Originally posted by Power_Put
thats more like it, DaiOni see if you could throw some info for me and thanks in advance
Okay, the article was in the january 04 issue of option magazine. Basically, it was an article where they took the ej20 (wrx), 4g63 (evo), 13brew, 13bt, 3sgte (celica/mr2), rb25det (skyline), rb20det (skyline), sr20det (s14)/sr20det (s15) - all relatively low capacity turbo'd engines - and threw mods at them until they got a reliable 350hp.

Now, the bad news: the first thing they did was toss out the stock turbo and add a td06sh-20g! Sorry to get your hopes up (I hadn't bothered to look at the FC section that closely). Though, obviously that says a lot about their thoughts on the stock turbo ;)

for interest's sake - with the FD they added power FC + commander, cat-back, hks intakes, downpipe, GTR fuel pump, 'racing' plugs = 352hp @ 0.9kg boost. They note that the turbo will (as we know) happily take more boost and create more hp. I also note that the test car has a sizeable FMIC - something they didn't mention in the parts list :p

Power_Put 02-23-04 10:02 AM

yeh ok mate thanks for the info

Power_Put 02-24-04 01:19 PM

anyone else who wants to comment on this reliable and cheep mod

Power_Put 02-24-04 03:14 PM

bump


All times are GMT -5. The time now is 03:31 PM.


© 2024 MH Sub I, LLC dba Internet Brands