What are the right compression numbers???
08-04-01, 07:54 AM
#1
Lurking..................
Thread Starter
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
What are the right compression numbers???
I am buying a compression tester sometime this week to test the compression on my car before I put back together, does anyone what the compression tester should read if my motor is ok??? Or what it would read if my motor isn't ok??? Any help would be appreciated...
08-04-01, 09:45 AM
#2
Senior Member
Join Date: Feb 2001
Location: Inwood, Long Island
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Are you going to buy a Rotary specific compression tester or an ordinary piston engine tester? The only way to get an accurate result would be using the first one, but if used properly even an ordinary tester can give you a pretty good reading(approximate). I know that the Mazda manual says that the compression should be at least 7bar(I think I forgot the units) which translates to approx. 105 psi.
08-04-01, 02:44 PM
#4
Blow up or win
Originally posted by black99
I am going to buy a rotary specific one most probably, that is if I can find one..
I am going to buy a rotary specific one most probably, that is if I can find one..
The old style one's looked like kind of a primitive polygraph machine, the new ones are digital.
08-04-01, 02:57 PM
#5
Blow up or win
Originally posted by RonKMiller
I know they are availabe, I'll try to see if I can find one... I think the price is going to blow your mind though.........
The old style one's looked like kind of a primitive polygraph machine, the new ones are digital.
I know they are availabe, I'll try to see if I can find one... I think the price is going to blow your mind though.........
The old style one's looked like kind of a primitive polygraph machine, the new ones are digital.
08-04-01, 03:20 PM
#6
Lurking..................
Thread Starter
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for finding that, at least I know I won't be getting a rotary one now.. I guess I'll stick with looking for a normal piston engine compression tester...
08-04-01, 06:14 PM
#7
Blow up or win
Yep, you can still get a pretty good baseline estimate with a "regular" compression tester. You'll need to get a Schraeder (sp?)valve to make it work right. I'll see if I can dig up how to do it - it's not really that hard. BTW, if you buy a compression tester get one with a stainless braided reinforced line. It will cost probably twice as much as an el cheapo but be much more accurate. When you do the reading this way you are watching the needle "bounce", and regular rubber (fiber) reinforced hoses are not that accurate. You'll also probably get a better quality guage as well. Stay tuned. (You are really smart getting a baseline reading on your new engine. It's probably one of the best ways to see what's going on now and in the future regarding wear)
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM