RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   What kind of ETs should I expect with 435 HP? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/what-kind-ets-should-i-expect-435-hp-269248/)

BRADYMAHONEY 02-07-04 05:06 PM

What kind of ETs should I expect with 435 HP?
 
With ET street tires and what would it run on regular street tires. Lets just say, what SHOULD my car run with a good driver and this horsepower. Thanks,

Brady Mahoney

silverflash2 02-07-04 05:10 PM

IS it finally a manual !

BRADYMAHONEY 02-07-04 05:19 PM

Not yet, but really soon. I have everything but my rear diff, and that will be on the way soon I think. Then I can crank up the boost. With the auto I got 405. Chris @ RP said I should get 30 more HP switching over to manual.

BRADYMAHONEY 02-07-04 05:20 PM

That was @ 14.7 PSI.

blackkiller7 02-07-04 05:23 PM

i can tell you what you would have if you stuck an LS1 in their:)

BRADYMAHONEY 02-07-04 05:35 PM

I am trying to prove a point to a friend, he thinks my car will only run in the 13s. LOL :)

blackkiller7 02-07-04 05:36 PM

no it will very quick

spoolin93r1 02-07-04 05:59 PM

with good driving and the proper drivetrain parts, you should be capable of low 11's, maybe even high 10's if you drive like a mad man. i know 350ish whp is good for mid 11's

BRADYMAHONEY 02-07-04 06:37 PM


Originally posted by blackkiller7
i can tell you what you would have if you stuck an LS1 in their:)
What is the dissplacment for the LS1? Is it a 350?

tt2323 02-07-04 07:18 PM

using the basic drag calulator figuring weight/hp... 11.1s

tt2323 02-07-04 07:20 PM

well at 3000 pounds with driver...the car could be lighter..just for an estimate

BRADYMAHONEY 02-07-04 07:48 PM

Thanks

fastcarfreak 02-07-04 09:03 PM

with the ET streets you should make it into the 10s with good driving. there are guys on the forum running 10s with 400 rwhp.

fastcarfreak 02-07-04 09:05 PM

witht he automatic in there, you should be good for low 14s high 13s, hehe. jk

blackkiller7 02-07-04 09:08 PM


Originally posted by BRADYMAHONEY
What is the dissplacment for the LS1? Is it a 350?
5.7 350 or as some say a 57b;)

BRADYMAHONEY 02-07-04 10:02 PM


Originally posted by fastcarfreak
witht he automatic in there, you should be good for low 14s high 13s, hehe. jk
You really think it would be that slow? I have never ran it at the track?

Sprockett 02-07-04 11:41 PM

No. If ATX was so much slower than Manual then high powered drag cars wouldn't rely on automatic transmissions (obviously not stock ATXs, but still). No missed shifts with an ATX...and when the track is gone in 7 seconds do you really want to have to worry about shifting four times?

spoolin93r1 02-08-04 12:35 AM

he's talking about the stock automatics. we all know how horribly slow they are. now ugprade to a good aftermarket auto, and the story might be different

$150FC 02-08-04 01:17 AM

spoautos dynoed at 412(?) and trapped 125.

rzograbian 02-08-04 01:21 AM

do you know how to drive good? when you said that you havent been at the track, then its your first time and you might get lucky and break 11's but since it your first time, i doubt it. it was the same for me. i was getting mid 14's with a stock fd. dont worry, it will only get better :):):)

Red-Rx7 02-08-04 02:46 AM

If it is your first time at the track, then expect 13's for a few passes. Be happy with 12's. Most likely, you are not going to go to the track on your attempt with a 430rwhp car and run 10's or low 11's.

jimlab 02-08-04 02:48 AM


Originally posted by BRADYMAHONEY
What is the dissplacment for the LS1? Is it a 350?
Technically, it's a 346...

bore squared * stroke * # cylinders * 0.7854 = CID
3.90" ^2 * 3.62" * 8 * 0.7854 = 345.95 CID

911GT2 02-08-04 11:49 AM


Originally posted by BRADYMAHONEY
I am trying to prove a point to a friend, he thinks my car will only run in the 13s. LOL :)
Punch your friend in the face, then show him my sig.

SPOautos 02-08-04 12:03 PM


Originally posted by blackkiller7
i can tell you what you would have if you stuck an LS1 in their:)

Yea, so can I....you'd have 100rwhp LESS

haha

STEPHEN

blackkiller7 02-08-04 12:07 PM


Originally posted by SPOautos
Yea, so can I....you'd have 100rwhp LESS

haha

STEPHEN

you havent seen my car then:);)


All times are GMT -5. The time now is 07:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands