RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   What do stock 3G injectors flow? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/what-do-stock-3g-injectors-flow-65215/)

yellow95 03-26-02 10:45 AM

What do stock 3G injectors flow?
 
Dont flame a Mustang guy please. I love your cars, especially the technology you put in them. A friend told me that the stock 3G injectors are good upgrades for the Mustang. Any idea what they flow, and where I could get some used?

Gary

Johnny 03-26-02 11:20 AM

stock primaries are 550cc and secondaries are 850cc...FD's have 2 of each...

Dont know how they would work in a mustang and if there where larger then Stock mustang injectors...how would your ECU handle it...

rynberg 03-26-02 11:21 AM

The primary injectors are 550 cc, secondary injectors are 850 cc. I doubt you would find any used 550 cc in usable condition. You might find some 850 cc injectors left over after someone upgraded to larger injectors, but since most people bore out their existing injectors, good luck. Check out partstrader.com. If you want new injectors, they are Nippon Denso side-feed. You can get them from www.rx7.com or www.srmotorsports.com.

airborne 03-26-02 11:22 AM

Pretty sure its 2 550cc primaries and 2 850cc secondaries.

New, injectors start at like $150...if you want to find used check the Parts section in the forum, and www.partstrader.com. good luck!

hapa 03-26-02 05:55 PM

The factory FD injectors are 550 and 850cc, but they are a side feed design, not a top feed, like most. You can find some big bosch 1600cc top feed injectors at www.k2rd.com

eric


All times are GMT -5. The time now is 07:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands