What Blockoff is this?
 

What block off plate do i need that goes on the LIM that is right by the one facing the firewall that went to the cat except this one looks to be the same shape but faces the right fender? can anyone help me identify which one this is so i can order it.

EGR

Yeah, it's definetly the EGR valve block-off plate. Make sure to use a gasket!!

really so its the one shaped like this <> right?

???

if your standing on the passenger side of the car facing the lower intake manifold, the block-off plate to be installed right there would be the EGR valve. Put the block off plate on that fits.

none of them fit. i mean i have one that goes over it. but it barely clears a side so there is still a little gap that air can escape from.

http://www.2751engineering.com/fd_bl...13BREW_EGR.jpg
EGR block off plate.

Pictures off all of them are available here.
http://www.2751engineering.com/fd_block_off_plates.htm

I beleive he's talking about the ACV releif port. You don't need to block it off IF you've blocked off the ACV. You don't even need to block off the one facing the firewall. Be sure to cap the hole on your airbox.

https://www.rx7club.com/attachment.p...id=98134&stc=1

So who got it?

Good call JONSKI. I forgot about that one. I swear you have pic of everything. Do you keep a camera in your fro at all times? If that is the one you really do not have to block it off as JONSKI said.

hahaha I forgot that one also. Good pic to show it!!