What adhesive should i use for the underside of a CF hood
 

I have a VIS Scoot CF hood. The underpanel unbonded from the hood. What should i use to bond it back? Thanks..

i'm sure any epoxy adhesive would work fine.

i used JB Weld to attach some bolts to the underside of mine (on my previous FD) so that i could take the rain shield in and out as needed

use fiber glass and resin you can get them at PepBoys.

Clean the two surfaces as good as you can. Rough the surfaces up a bit for a good bond aith a dremel and sanding drum. Mix some fiberglass resin with hardener. Let the resin set up a little. Trowel on the resin between the two surfaces and clamp it for an hour. If done right, you won't pull it apart

later