water temp problems! please help
 

According to my pfc commander, when the 13b is warmed up, it reads anywhere between 35-50 degrees celcius. This is way to low! Shouldn't it be running from 90-100 deg? Anyway, the problem is that the car won't reach full boost till after about 50 degrees, which I hardly ever reach. Has anyone ever heard about this one? Could it be a bad sensor or connection? Can it be re- calibrated or something? Please here my cries for help. An FD without boost is like an athlete without steroids.:( Please help.
thanks in advance.

actually if your running Celcuis. it should be about
85-100 depending on driving and weather...
way to low temp... I think your PFC reading temps are wrong... You can adjust actual temps and reading temps...

how did you get tour pfc to tell you the temp?

it can tell you everything thats why they are soooo nice... You can pick how many and what you want it to display. 1-8 things at once.. I have my water, boost up..Just the 2. What is shown on your display right now?

right now I'm displaying 4:boost, wtr temp, air temp, and inj. duty. Did I here you right???? Is there a way to adjust the reading off the pfc? The water temp on the stock reading is normal. right in the middle like usual, but the pfc keeps reading 30-40celcius. watahek. If you can, pleeeeeeeeaaaaaaaase tell me how. This would just make my day. thanks

just change one of your settings to knock. Press back, then select airtemp or something and change it to knock, scroll it with up and down to get to it, the right to actually select it. then put it on knock and press next again then it should show right up...

for water temp, go to the page for water temp. Its in your settings area. Then tell me the number your see.
it should be like

1.00 1.00
1.04 and I cant remember the rest, just post them, then I will tell you mine.. Hopefully that will help you out.
There should be a display and an actual temp...

thanks for your help man. I appreciate it.
it reads.....80 - 1.00 1.00
50 - 1.07 1.01
30 - 1.26 1.21
10 - 1.60 1.50
-10 - 2.01 1.87
-30 - 2.81 2.57

Right now I cant get to my car, its flooding a little right now. So did you do a sensor check before too. I cant get the numbers off my FC right now. I will have to get back to you when the rain stops....

I haven't done any sensor checks yet. What actually am I checking? voltages ? let me know.thanks.

What exactly do the number in that table mean?

?

I may have resolved a simular issue on mine ... however, I did it in the ECU - Power FC form

the thread is named -36c temp ...

:~) Steve