vmount with stock r1 oil coolers fit?
 

I'm yet to mount my r1 dual oil coolers and im in the process of making the switch to a vmount. I completely forgot i have the oil coolers and im wondering if the lines for the oil coolers will interfere or make it a pita to install a vmic?

ive seen a bunch of dual oil coolers + vmic but believe they are all after market and run the plumbing behind the crash/rebar...:scratch:

if you have pics of your set up with stock r1 coolers please post up:icon_tup:

I don't have a pic handy but with my RX7 store vmount I had to have a line made to fit for my passenger side oil cooler. The stock line was in the way of the rad I believe.

hmm not what i wanted to hear!

do you think a vmount COULD fit if it was angled differently or no matter what the lines would still be in the way?

ive got a v mount in with stock twin oil cooler and lines, but im rhd, not sure if that makes any difference. couple of pics may help??

http://img.photobucket.com/albums/v3...i/DSC00199.jpg

http://img.photobucket.com/albums/v374/astragsi/bay.jpg

I've been looking at vmounts myself, and according to the rotary extreme installation instructions it will work with dual R1 hard lines (and AC)

All I had to do was take my stock line to a local hydraulic shop, they took to stock end off and welded it onto a new line. They gave me a connector for the other end and I just had to cut it to fit, think it was less than $50.

Karl, that first picture is exactly what i needed! it should fit... thanks!

halifax, have any pictures? i might have to do that..

I don't believe I have any pics currently, can't find them.